A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

I DID IT!!! I flashed TNT2 card!!!!!!!!!



 
 
Thread Tools Display Modes
  #1  
Old September 14th 04, 07:15 PM
Papcina
external usenet poster
 
Posts: n/a
Default I DID IT!!! I flashed TNT2 card!!!!!!!!!

Hi there!!!!!
I finally did it!!!!!
The problem was in BIOS that didn't have the correct subsystem ID... i
got the BIOS editor and I resolved the thing...... great stufff!!!!!
I am so happy!!!!!!! Everything is working fine plus I can OC it
untill 270MHz (before I think it was only 250)...
I will put the review on my site for a couple of weeks...
if anyone want's to ask me something, please contact me.

Regards!!

P.S.- I flashed an ASUS AGP-V3800M (non TV-out),32Mb, with nVidia Riva
TNT2 Model64/64 Pro card......
--
Veni, vidi, vici......

Proud to be Papcina!!!!
e-mail:
  #2  
Old September 14th 04, 10:34 PM
Biz
external usenet poster
 
Posts: n/a
Default

And now I can play FarCry at 4fps, whereas b4 it was 3 fps, thats a 25%
increase in performance. Damn I'm sweet!


"Papcina" m wrote in
message ...
Hi there!!!!!
I finally did it!!!!!
The problem was in BIOS that didn't have the correct subsystem ID... i
got the BIOS editor and I resolved the thing...... great stufff!!!!!
I am so happy!!!!!!! Everything is working fine plus I can OC it
untill 270MHz (before I think it was only 250)...
I will put the review on my site for a couple of weeks...
if anyone want's to ask me something, please contact me.

Regards!!

P.S.- I flashed an ASUS AGP-V3800M (non TV-out),32Mb, with nVidia Riva
TNT2 Model64/64 Pro card......
--
Veni, vidi, vici......

Proud to be Papcina!!!!
e-mail:



  #3  
Old September 15th 04, 06:13 AM
Papcina
external usenet poster
 
Posts: n/a
Default

On Tue, 14 Sep 2004 21:34:22 GMT, "Biz" wrote
this text which is not true at all :

And now I can play FarCry at 4fps, whereas b4 it was 3 fps, thats a 25%
increase in performance. Damn I'm sweet!



heheeh....
--
Veni, vidi, vici......

Proud to be Papcina!!!!
e-mail:
  #4  
Old September 15th 04, 08:10 AM
Tim
external usenet poster
 
Posts: n/a
Default


"Biz" wrote in message
...
And now I can play FarCry at 4fps, whereas b4 it was 3 fps, thats a 25%
increase in performance. Damn I'm sweet!



Whatta you on crack? That's a 33% increase. You're sweeter than ya thought!


  #5  
Old September 15th 04, 07:35 PM
Spajky
external usenet poster
 
Posts: n/a
Default

On Wed, 15 Sep 2004 03:10:12 -0400, "Tim"
wrote:


"Biz" wrote in message
...
And now I can play FarCry at 4fps, whereas b4 it was 3 fps, thats a 25%
increase in performance. Damn I'm sweet!


Whatta you on crack? That's a 33% increase. You're sweeter than ya thought!

:-))))

with setting monitor to 16-bit & setting in drivers also 16-bit for
textures (instead of default 32-bit ones) there could be also even
more performance ... maybe 6 or 7 fps .. :-)
--
Regards, SPAJKY ®
& visit my site @ http://www.spajky.vze.com
"Tualatin OC-ed / BX-Slot1 / inaudible setup!"
E-mail AntiSpam: remove ##
  #6  
Old September 16th 04, 05:14 AM
First of One
external usenet poster
 
Posts: n/a
Default

My Voodoo3 will whoop your card's ass... :-)

--
"War is the continuation of politics by other means.
It can therefore be said that politics is war without
bloodshed while war is politics with bloodshed."


"Papcina" m wrote in
message ...
Hi there!!!!!
I finally did it!!!!!
The problem was in BIOS that didn't have the correct subsystem ID... i
got the BIOS editor and I resolved the thing...... great stufff!!!!!
I am so happy!!!!!!! Everything is working fine plus I can OC it
untill 270MHz (before I think it was only 250)...
I will put the review on my site for a couple of weeks...
if anyone want's to ask me something, please contact me.

Regards!!

P.S.- I flashed an ASUS AGP-V3800M (non TV-out),32Mb, with nVidia Riva
TNT2 Model64/64 Pro card......
--
Veni, vidi, vici......

Proud to be Papcina!!!!
e-mail:



  #7  
Old September 16th 04, 04:18 PM
byru
external usenet poster
 
Posts: n/a
Default



with setting monitor to 16-bit & setting in drivers also 16-bit for
textures (instead of default 32-bit ones) there could be also even
more performance ... maybe 6 or 7 fps .. :-)


no way!
Byru


  #8  
Old September 23rd 04, 11:53 AM
Skybuck Flying
external usenet poster
 
Posts: n/a
Default

Dude what did you flash it to ?

a geforce fx5200 ?

"Papcina" m wrote in
message ...
Hi there!!!!!
I finally did it!!!!!
The problem was in BIOS that didn't have the correct subsystem ID... i
got the BIOS editor and I resolved the thing...... great stufff!!!!!
I am so happy!!!!!!! Everything is working fine plus I can OC it
untill 270MHz (before I think it was only 250)...
I will put the review on my site for a couple of weeks...
if anyone want's to ask me something, please contact me.

Regards!!

P.S.- I flashed an ASUS AGP-V3800M (non TV-out),32Mb, with nVidia Riva
TNT2 Model64/64 Pro card......
--
Veni, vidi, vici......

Proud to be Papcina!!!!
e-mail:



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Spare SCSI card, question about compatability upgrdman Homebuilt PC's 4 October 28th 04 08:47 PM
help with my old TNT2 PCI card sp Nvidia Videocards 11 September 12th 04 03:18 AM
TNT2 PCI card faulty...???? Graham Kerr Nvidia Videocards 4 August 28th 04 01:35 AM
Video card for Asus CUSL2 Kamal Asus Motherboards 2 January 28th 04 06:03 PM
Need your advice on a TV tuner card RoamDog Ati Videocards 7 December 20th 03 11:41 PM


All times are GMT +1. The time now is 09:02 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.