A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

52.16 & tv-out



 
 
Thread Tools Display Modes
  #1  
Old October 26th 03, 06:59 PM
tourettes
external usenet poster
 
Posts: n/a
Default 52.16 & tv-out

I can't enable 720x576 @ 50Hz mode for tv-out with these new drivers.

Whole 720x576 resolution seems to be missing from tv-out. With older
drivers I could just use RivaTuner to add that specific resolution for
tv-out but with these new drivers that workaround doesn't seem to work.

52.16 drivers include internal 'Change Resolutions' but add custom
resolution is only available for monitor not for tv-out.

50Hz for tv-out seems also be missing, all I can select is 60Hz for
every tv-out mode.


GF4 4200 with Conexant CX25873



---
Janne
  #2  
Old October 26th 03, 08:11 PM
B
external usenet poster
 
Posts: n/a
Default

Try to override the refresh rates. Assuming you have Windows XP, right click
the desktop and click properties, then the SETTINGS tab, then advanced. Go
into the TAB for your specific card. There should be a GF 4 TI 4200 TAB.
Click override refresh rates. If you still do not see the resolution then
find the box that says Hide Modes that this monitor cannot support and
untick this box.

regards

B
"tourettes" wrote in message
...
I can't enable 720x576 @ 50Hz mode for tv-out with these new drivers.

Whole 720x576 resolution seems to be missing from tv-out. With older
drivers I could just use RivaTuner to add that specific resolution for
tv-out but with these new drivers that workaround doesn't seem to work.

52.16 drivers include internal 'Change Resolutions' but add custom
resolution is only available for monitor not for tv-out.

50Hz for tv-out seems also be missing, all I can select is 60Hz for
every tv-out mode.


GF4 4200 with Conexant CX25873



---
Janne



  #3  
Old October 26th 03, 09:16 PM
tourettes
external usenet poster
 
Posts: n/a
Default

B wrote:
Try to override the refresh rates. Assuming you have Windows XP, right click
the desktop and click properties, then the SETTINGS tab, then advanced. Go
into the TAB for your specific card. There should be a GF 4 TI 4200 TAB.
Click override refresh rates. If you still do not see the resolution then
find the box that says Hide Modes that this monitor cannot support and
untick this box.


720x576 resolution is found from monitor and tv override refresh rates
tabs. 720x576 resolution can be used on monitor but not on tv-out.

Also 60Hz is only refresh rate that is available for all tv-out modes.
PAL movies needs 50Hz.

---
Janne


  #4  
Old October 27th 03, 11:52 AM
tourettes
external usenet poster
 
Posts: n/a
Default

tourettes wrote:
B wrote:

Try to override the refresh rates. Assuming you have Windows XP, right
click
the desktop and click properties, then the SETTINGS tab, then
advanced. Go
into the TAB for your specific card. There should be a GF 4 TI 4200 TAB.
Click override refresh rates. If you still do not see the resolution then
find the box that says Hide Modes that this monitor cannot support and
untick this box.



720x576 resolution is found from monitor and tv override refresh rates
tabs. 720x576 resolution can be used on monitor but not on tv-out.


Tried 52.16 drives in clean Windows XP isntallation. Now 720x576
resolution is available for tv-out. It seems that removing older
45.33 drivers from control panel and using Driver Cleaner 2.0 wasn't
enough.

Also 60Hz is only refresh rate that is available for all tv-out modes.
PAL movies needs 50Hz.


So, does anyone have ideas how 52.16 drivers would allow 50Hz?
  #5  
Old October 28th 03, 11:40 AM
Michael F.S. Christensen
external usenet poster
 
Posts: n/a
Default

....snip....

Tried 52.16 drives in clean Windows XP isntallation. Now 720x576
resolution is available for tv-out. It seems that removing older
45.33 drivers from control panel and using Driver Cleaner 2.0 wasn't
enough.

So, does anyone have ideas how 52.16 drivers would allow 50Hz?


I have the exact same problem.

See
http://groups.google.dk/groups?q=tvo...lia.net&rnum=2

TVout @ 50 hz is impossible in the newer drivers.

Best regards
Michael


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nVidia to release WHQL 52.16 next week... Too_Much_Coffee Nvidia Videocards 13 November 5th 03 01:33 PM
52.16 question Chris Murfitt Nvidia Videocards 5 November 1st 03 02:35 AM
GF3 Ti200 & 52.16 Drivers Turd Ferguson Nvidia Videocards 3 October 25th 03 04:48 PM
52.16 Settings Question Joe727 Nvidia Videocards 1 October 24th 03 05:09 PM
Updated to 52.16 - Better overclock Daniel Roberts Nvidia Videocards 0 October 23rd 03 08:32 PM


All times are GMT +1. The time now is 01:34 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.