HardwareBanter

HardwareBanter (http://www.hardwarebanter.com/index.php)
-   General (http://www.hardwarebanter.com/forumdisplay.php?f=28)
-   -   puzzle (http://www.hardwarebanter.com/showthread.php?t=2434)

Terry December 2nd 03 06:04 PM

puzzle
 
I have a real strange situation here. I bought a new case for and old mobo a
soyo SY-K7VIA. When assembled the power does not come on. I get
nothing.When I lay the mother board out on a static mat and hook up the
power supply with the vid card and the floopy and the HD it boots up no
problem!Very strange.Anybody ever heard of this situation.
Terry



Philo December 2nd 03 06:11 PM


"Terry" wrote in message
...
I have a real strange situation here. I bought a new case for and old mobo

a
soyo SY-K7VIA. When assembled the power does not come on. I get
nothing.When I lay the mother board out on a static mat and hook up the
power supply with the vid card and the floopy and the HD it boots up no
problem!Very strange.Anybody ever heard of this situation.
Terry


Yes...something is "grounding out" be sure to examime all mounting
points and stand offs carefully



Ralph Mowery December 2nd 03 07:14 PM


I have a real strange situation here. I bought a new case for and old mobo

a
soyo SY-K7VIA. When assembled the power does not come on. I get
nothing.When I lay the mother board out on a static mat and hook up the
power supply with the vid card and the floopy and the HD it boots up no
problem!Very strange.Anybody ever heard of this situation.
Terry

Not too much strange here. Somewhere you are shorting the motherboard to
the new case. Most ot the time if there is a short , especially on the
power wires/traces, the computer will not come on. Check very carefully
that nothing on the mother board is touching the case that should not be.




Terry December 2nd 03 07:59 PM

Thanks I will give that a shot.Appreciate the quick response.
Terry
"Philo" wrote in message
...

"Terry" wrote in message
...
I have a real strange situation here. I bought a new case for and old

mobo
a
soyo SY-K7VIA. When assembled the power does not come on. I get
nothing.When I lay the mother board out on a static mat and hook up the
power supply with the vid card and the floopy and the HD it boots up no
problem!Very strange.Anybody ever heard of this situation.
Terry


Yes...something is "grounding out" be sure to examime all mounting
points and stand offs carefully






All times are GMT +1. The time now is 12:04 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com