AMD64 3200 + Asus K8V SE Deluxe Cool and Quiet brings up BSOD PFN_LIST_CORRUPT
 

Hi ,

after flashing the BIOS of my K8V to Rev. 1003, which I hoped would solve my
problems with getting CnQ to work, actually made my problems worse. Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to work as
the PC runs day and night and electricity isn´t as cheap as it used to be.

But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT seems
to be linked to bad RAM or bad driver behaviour.

Anybody had the same problem ?

Addy

My AMD64-PC

Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon 9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.

I don't have your mobo, but I know that new doesn't always mean better. I
have a Chaintech VNF3-250 mobo, and tried the latest BIOS dated 4/30/2004
and my system would reboot without warning, or sometimes it would be
proceeded with a buzzing noise. When I reverted back to the older BIOS, the
problem disappeared. But I ams stuck with a BIOS that reports my CPU temp
at 12C, instead of 37C


"Addy" wrote in message
...
Hi ,

after flashing the BIOS of my K8V to Rev. 1003, which I hoped would solve
my
problems with getting CnQ to work, actually made my problems worse.
Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to work
as
the PC runs day and night and electricity isn´t as cheap as it used to be.

But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I
start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT seems
to be linked to bad RAM or bad driver behaviour.

Anybody had the same problem ?

Addy

My AMD64-PC

Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon 9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.

"Early 2 Riz" schrieb im Newsbeitrag
...
I don't have your mobo, but I know that new doesn't always mean better. I
have a Chaintech VNF3-250 mobo, and tried the latest BIOS dated 4/30/2004
and my system would reboot without warning, or sometimes it would be
proceeded with a buzzing noise. When I reverted back to the older BIOS,
the
problem disappeared. But I ams stuck with a BIOS that reports my CPU temp
at 12C, instead of 37C


Hi,
I considered going back to an earlier BIOS but that would mean other trouble
and the CnQ didn´t work then either.

Addy



"Addy" wrote in message
...
Hi ,

after flashing the BIOS of my K8V to Rev. 1003, which I hoped would
solve
my
problems with getting CnQ to work, actually made my problems worse.
Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to
work
as
the PC runs day and night and electricity isn´t as cheap as it used to
be.

But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I
start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT
seems
to be linked to bad RAM or bad driver behaviour.

Anybody had the same problem ?

Addy

My AMD64-PC

Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon
9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.

Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is not
even a problem here. g


"Addy" wrote in message
...

"Early 2 Riz" schrieb im Newsbeitrag
...
I don't have your mobo, but I know that new doesn't always mean better.
I
have a Chaintech VNF3-250 mobo, and tried the latest BIOS dated
4/30/2004
and my system would reboot without warning, or sometimes it would be
proceeded with a buzzing noise. When I reverted back to the older BIOS,
the
problem disappeared. But I ams stuck with a BIOS that reports my CPU
temp
at 12C, instead of 37C


Hi,
I considered going back to an earlier BIOS but that would mean other
trouble
and the CnQ didn´t work then either.

Addy



"Addy" wrote in message
...
Hi ,

after flashing the BIOS of my K8V to Rev. 1003, which I hoped would
solve
my
problems with getting CnQ to work, actually made my problems worse.
Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to
work
as
the PC runs day and night and electricity isn´t as cheap as it used to
be.

But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I
start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT
seems
to be linked to bad RAM or bad driver behaviour.

Anybody had the same problem ?

Addy

My AMD64-PC

Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon
9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.

"Early 2 Riz" wrote in message
...
Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is not
even a problem here. g

Are you certain about that? My Epox EP-8KDA3j has it.
--
Steve Midgley

My Chaintech VNF3-250 doesn't.


"Steve Midgley" wrote in message
...
"Early 2 Riz" wrote in message
...
Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is not
even a problem here. g

Are you certain about that? My Epox EP-8KDA3j has it.
--
Steve Midgley

Also, Newegg doesn't offer the Epox EP-8KDA3j motherboard. Where do you
live?


"Early 2 Riz" wrote in message
...
My Chaintech VNF3-250 doesn't.


"Steve Midgley" wrote in message
...
"Early 2 Riz" wrote in message
...
Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is
not
even a problem here. g

Are you certain about that? My Epox EP-8KDA3j has it.
--
Steve Midgley

"Early 2 Riz" wrote in message
...
Also, Newegg doesn't offer the Epox EP-8KDA3j motherboard. Where do you
live?


No, Newegg doesn't have the newest Epox boards but mWave does -
http://tinyurl.com/2j5xy
--
Steve Midgley

On Mon, 14 Jun 2004 17:44:52 -0500, "Early 2 Riz"
wrote:

Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is not
even a problem here. g



Aopen AK86-L bios 1.11 is supposed to have cool and quiet, but it's
grayed out in my bios for some reason. Some conflicting setting or ??

LOL. the Aopen AK86-L motherboard is VIA based, not Nforce3 250 based.



"john" wrote in message
...
On Mon, 14 Jun 2004 17:44:52 -0500, "Early 2 Riz"
wrote:

Cool and Quiet doesn't exist on Nforce3 250 motherboards, so that is not
even a problem here. g



Aopen AK86-L bios 1.11 is supposed to have cool and quiet, but it's
grayed out in my bios for some reason. Some conflicting setting or ??