|
|
can someone look at this?
this is my sisoft report:
it reckons the cpu fan is busted. ive just stuck the entire comp into a new case (thermaltake) and now i have this problem. the cpu doesnt seem overheated, in fact the heat sink seems quite cool to me by touch. any ideas? it also says "PCI latency too high." no idea what that means or how to fix it.... cheers steve report below: SiSoftware Sandra System Summary Analysing... Finished Successfully : Yes Mainboard Information Analysing... CPU Fan Speed : 1534rpm Warning 2533 : Disabled host controllers are present. Check BIOS settings. Tip 2530 : MPS 1.4 or later is recommended for MP systems. Check BIOS version. Notice 224 : SMBIOS/DMI information may be inaccurate. Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive. Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB. Warning 2519 : One of the system fans has failed or is spinning too slowly. Finished Successfully : Yes CPU & BIOS Information Analysing... CPU Fan Speed : 1541rpm Warning 2533 : Processor 1 : Disabled host controllers are present. Check BIOS settings. Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed. Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate. Warning 216 : Processor 1 : CPU fan has failed! Check it. Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate. Tip 212 : System BIOS : BIOS can be shadowed so check whether it is. Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed. Finished Successfully : Yes APM & ACPI Information Analysing... Notice 224 : SMBIOS/DMI information may be inaccurate. Finished Successfully : Yes PCI, AGP, CardBus Bus(es) Information Analysing... Warning 1206 : ASRock Inc SiS5513 EIDE Controller (A,B step) : PCI latency too high. Device could hog the bus for too long. Finished Successfully : Yes Video System Information Analysing... Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible. Tip 322 : Primary Display Driver (display) : Turn off screen savers. Use the monitor power saving mode. Tip 319 : NVIDIA GeForce4 MX 420 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible. Tip 322 : NVIDIA GeForce4 MX 420 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Turn off screen savers. Use the monitor power saving mode. Tip 316 : Default Monitor : Use a Energy Star (DPMS) power saving monitor. Warning 332 : Default Monitor : Use a Plug & Play/DDC compatible monitor and video adapter. Finished Successfully : Yes Windows Memory Information Analysing... Finished Successfully : Yes Drives Information Analysing... Warning 1800 : Hard Disk (C:) : Increase free disk space. Some programs may run out of disk space. Tip 1821 : Hard Disk (C:) : Label (name) drive. Tip 1821 : Hard Disk (D:) : Label (name) drive. Warning 1808 : Hard Disk (D:) : Large cluster sizes waste disk space. Break drive into smaller partitions or use NTFS. Tip 1821 : Hard Disk (E:) : Label (name) drive. Warning : CD-ROM/DVD (H:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Finished Successfully : Yes Ports Information Analysing... Finished Successfully : Yes Keyboard Information Analysing... Finished Successfully : Yes Mouse Information Analysing... Finished Successfully : Yes Sound Card Information Analysing... Finished Successfully : Yes Printer and Fax Information Analysing... Finished Successfully : Yes MCI Devices Information Analysing... Finished Successfully : Yes Windows Information Analysing... Finished Successfully : Yes WinSock Information Analysing... Finished Successfully : Yes Processes Information Analysing... Finished Successfully : Yes Modules Information Analysing... Finished Successfully : Yes OLE Information Analysing... Finished Successfully : Yes DirectX Information Analysing... Finished Successfully : Yes Network Information Analysing... Finished Successfully : Yes SCSI Information Analysing... Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : AOPEN CD-RW CRW4048 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : SAMSUNG DVD-ROM SD-616F : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Finished Successfully : Yes Font Information Analysing... Finished Successfully : Yes CMOS Information Analysing... Finished Successfully : Yes OpenGL Video Information Analysing... Finished Successfully : Yes Services Information Analysing... Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version. Tip 2130 : Messenger : Service may be disabled on Home/Professional OS version. Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version. Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version. Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version. Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version. Finished Successfully : Yes ATA/ATAPI Information Analysing... Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety. Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired. Finished Successfully : Yes Data Sources Information Analysing... Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Finished Successfully : Yes Hardware IRQ Settings Analysing... Finished Successfully : Yes DMA Settings Analysing... Finished Successfully : Yes I/O Settings Analysing... Finished Successfully : Yes Memory Resources Analysing... Finished Successfully : Yes Plug & Play Enumerator Analysing... Finished Successfully : Yes Performance Tune-up Wizard Finished Successfully : Yes |
oh, and while im at it, can someone tell me why sisoft tells me that i have
an athlon xp2800, and then tells me that its only running at 2.09ghz? cheers steve "steve" wrote in message ... this is my sisoft report: it reckons the cpu fan is busted. ive just stuck the entire comp into a new case (thermaltake) and now i have this problem. the cpu doesnt seem overheated, in fact the heat sink seems quite cool to me by touch. any ideas? it also says "PCI latency too high." no idea what that means or how to fix it.... cheers steve report below: SiSoftware Sandra System Summary Analysing... Finished Successfully : Yes Mainboard Information Analysing... CPU Fan Speed : 1534rpm Warning 2533 : Disabled host controllers are present. Check BIOS settings. Tip 2530 : MPS 1.4 or later is recommended for MP systems. Check BIOS version. Notice 224 : SMBIOS/DMI information may be inaccurate. Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive. Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB. Warning 2519 : One of the system fans has failed or is spinning too slowly. Finished Successfully : Yes CPU & BIOS Information Analysing... CPU Fan Speed : 1541rpm Warning 2533 : Processor 1 : Disabled host controllers are present. Check BIOS settings. Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed. Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate. Warning 216 : Processor 1 : CPU fan has failed! Check it. Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate. Tip 212 : System BIOS : BIOS can be shadowed so check whether it is. Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed. Finished Successfully : Yes APM & ACPI Information Analysing... Notice 224 : SMBIOS/DMI information may be inaccurate. Finished Successfully : Yes PCI, AGP, CardBus Bus(es) Information Analysing... Warning 1206 : ASRock Inc SiS5513 EIDE Controller (A,B step) : PCI latency too high. Device could hog the bus for too long. Finished Successfully : Yes Video System Information Analysing... Tip 319 : Primary Display Driver (display) : A refresh rate of at least 75Hz is recommended. Increase it if possible. Tip 322 : Primary Display Driver (display) : Turn off screen savers. Use the monitor power saving mode. Tip 319 : NVIDIA GeForce4 MX 420 (\\.\DISPLAY1) @ \\.\DISPLAY1 : A refresh rate of at least 75Hz is recommended. Increase it if possible. Tip 322 : NVIDIA GeForce4 MX 420 (\\.\DISPLAY1) @ \\.\DISPLAY1 : Turn off screen savers. Use the monitor power saving mode. Tip 316 : Default Monitor : Use a Energy Star (DPMS) power saving monitor. Warning 332 : Default Monitor : Use a Plug & Play/DDC compatible monitor and video adapter. Finished Successfully : Yes Windows Memory Information Analysing... Finished Successfully : Yes Drives Information Analysing... Warning 1800 : Hard Disk (C:) : Increase free disk space. Some programs may run out of disk space. Tip 1821 : Hard Disk (C:) : Label (name) drive. Tip 1821 : Hard Disk (D:) : Label (name) drive. Warning 1808 : Hard Disk (D:) : Large cluster sizes waste disk space. Break drive into smaller partitions or use NTFS. Tip 1821 : Hard Disk (E:) : Label (name) drive. Warning : CD-ROM/DVD (H:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Finished Successfully : Yes Ports Information Analysing... Finished Successfully : Yes Keyboard Information Analysing... Finished Successfully : Yes Mouse Information Analysing... Finished Successfully : Yes Sound Card Information Analysing... Finished Successfully : Yes Printer and Fax Information Analysing... Finished Successfully : Yes MCI Devices Information Analysing... Finished Successfully : Yes Windows Information Analysing... Finished Successfully : Yes WinSock Information Analysing... Finished Successfully : Yes Processes Information Analysing... Finished Successfully : Yes Modules Information Analysing... Finished Successfully : Yes OLE Information Analysing... Finished Successfully : Yes DirectX Information Analysing... Finished Successfully : Yes Network Information Analysing... Finished Successfully : Yes SCSI Information Analysing... Warning 2600 : Maxtor 6 Y160P0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : AOPEN CD-RW CRW4048 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : SAMSUNG DVD-ROM SD-616F : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Finished Successfully : Yes Font Information Analysing... Finished Successfully : Yes CMOS Information Analysing... Finished Successfully : Yes OpenGL Video Information Analysing... Finished Successfully : Yes Services Information Analysing... Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version. Tip 2130 : Messenger : Service may be disabled on Home/Professional OS version. Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version. Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version. Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version. Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version. Finished Successfully : Yes ATA/ATAPI Information Analysing... Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety. Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired. Finished Successfully : Yes Data Sources Information Analysing... Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Finished Successfully : Yes Hardware IRQ Settings Analysing... Finished Successfully : Yes DMA Settings Analysing... Finished Successfully : Yes I/O Settings Analysing... Finished Successfully : Yes Memory Resources Analysing... Finished Successfully : Yes Plug & Play Enumerator Analysing... Finished Successfully : Yes Performance Tune-up Wizard Finished Successfully : Yes |
On Mon, 1 Mar 2004 21:12:24 +0100, "steve"
wrote: this is my sisoft report: I see the problem already... Sisoft Sandra. Do not run it then look for problems, as it will give false negatives. Use Sandra to compare benchmarks if necessary, but otherwise ignore it. |
ok cheers m8
have a good 1 steve "kony" wrote in message ... On Mon, 1 Mar 2004 21:12:24 +0100, "steve" wrote: this is my sisoft report: I see the problem already... Sisoft Sandra. Do not run it then look for problems, as it will give false negatives. Use Sandra to compare benchmarks if necessary, but otherwise ignore it. |
| All times are GMT +1. The time now is 09:59 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
HardwareBanter.com