If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB: Proliant 5500 duplexing option
Looking for a Proliant 5500 duplexing option...
Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#2
|
|||
|
|||
this is what you need...
actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#3
|
|||
|
|||
Ya, but the shipping cost is $28.00 !!!
{I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#4
|
|||
|
|||
so buy the auction, and have him just send you the PCB for $6.00. let him do
what he will with he cage. LC "Dan" . spamcop.net wrote in message ... Ya, but the shipping cost is $28.00 !!! {I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#5
|
|||
|
|||
I just got a reply:
He wants $16.00 to ship the PCB.... "NuT CrAcKeR" wrote in message ... so buy the auction, and have him just send you the PCB for $6.00. let him do what he will with he cage. LC "Dan" . spamcop.net wrote in message ... Ya, but the shipping cost is $28.00 !!! {I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#6
|
|||
|
|||
UFB !!!!
what a rip off. there should be a service on ebay where you can report schiezters like that for gouging on shipping. Bide your time, there will be others. LC "Dan" . spamcop.net wrote in message ... I just got a reply: He wants $16.00 to ship the PCB.... "NuT CrAcKeR" wrote in message ... so buy the auction, and have him just send you the PCB for $6.00. let him do what he will with he cage. LC "Dan" . spamcop.net wrote in message ... Ya, but the shipping cost is $28.00 !!! {I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#7
|
|||
|
|||
KKKP overcharges on the shiipping because ebay doesn't take a cut on
the shipping. Just bid accordingly , he is honest about it up front at least . UFB !!!! what a rip off. there should be a service on ebay where you can report schiezters like that for gouging on shipping. Bide your time, there will be others. LC "Dan" . spamcop.net wrote in message ... I just got a reply: He wants $16.00 to ship the PCB.... "NuT CrAcKeR" wrote in message ... so buy the auction, and have him just send you the PCB for $6.00. let him do what he will with he cage. LC "Dan" . spamcop.net wrote in message ... Ya, but the shipping cost is $28.00 !!! {I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...m=3095138 734 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
#8
|
|||
|
|||
Ya, he honestly tries to rip me off....
Shish! "Sharmon" wrote in message ... KKKP overcharges on the shiipping because ebay doesn't take a cut on the shipping. Just bid accordingly , he is honest about it up front at least . UFB !!!! what a rip off. there should be a service on ebay where you can report schiezters like that for gouging on shipping. Bide your time, there will be others. LC "Dan" . spamcop.net wrote in message ... I just got a reply: He wants $16.00 to ship the PCB.... "NuT CrAcKeR" wrote in message ... so buy the auction, and have him just send you the PCB for $6.00. let him do what he will with he cage. LC "Dan" . spamcop.net wrote in message ... Ya, but the shipping cost is $28.00 !!! {I've known him to charge a bit steep for shipping to WA} "NuT CrAcKeR" wrote in message ... this is what you need... actually, its a bit more, but it has the stupid little pcb on the back that makes it duplexed. http://cgi.ebay.com/ws/eBayISAPI.dll...em=3095138 73 4 &rd=1 LC "Dan" . spamcop.net wrote in message ... Looking for a Proliant 5500 duplexing option... Anyone have one available that isn't going to overcharge on the shipping? Looking to spend $10-$15..... (+ shipping) Dan French |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Garage sale: Proliant 4500, 5500 & parts.... | Dan | Compaq Servers | 0 | May 4th 04 06:13 PM |
LINUX 53.28 BAD Performance? | Gizmo | Nvidia Videocards | 7 | December 31st 03 08:40 PM |
(WW) NVIDIA(0): Option "TVStandart" is not used | Wladimir Krawtschunowski | Nvidia Videocards | 0 | December 25th 03 01:20 AM |
Compaq Proliant 5500 won't power up | Jim Balson | Compaq Computers | 7 | September 19th 03 12:05 AM |
Compaq Proliant 5500 won't power up | Jim Balson | Compaq Servers | 6 | September 19th 03 12:05 AM |