If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ot-cd burning software recommends?
Not happy with Nero--any other shareware or good but cheap cd burning software
out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale |
#2
|
|||
|
|||
I've had great success with Roxio. It is a little pricier though... It helps
that I got it for free! And yes Dale, before you start on the copyright thing again, it was a legal CD that was given to me by Roxio. ;-) Deep "DEJ57" wrote in message ... Not happy with Nero--any other shareware or good but cheap cd burning software out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale |
#3
|
|||
|
|||
Click'n'Burn Pro..... hands down.
HH "Miss Jo Anne CD" wrote in message ... I have had very good luck with Nero..It took me awhile to figure it out (It deinitely isn`t the most new user friendly program)..But once I got it down I haven`t had any problems |
#4
|
|||
|
|||
Have you tried Click 'n' Burn Pro? I've tried Nero...wasn't impressed. Same
for Roxio, Just Burn, etc. I like NeoDVD 2 Plus for burning DVDs. HH "doS" wrote in message ... Nothing better than nero. Make sure you get the latest updates. "DEJ57" wrote in message ... Not happy with Nero--any other shareware or good but cheap cd burning software out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale |
#5
|
|||
|
|||
Nero has far more options.
I try everything that comes along, at least once. "HH" wrote in message . .. Have you tried Click 'n' Burn Pro? I've tried Nero...wasn't impressed. Same for Roxio, Just Burn, etc. I like NeoDVD 2 Plus for burning DVDs. HH "doS" wrote in message ... Nothing better than nero. Make sure you get the latest updates. "DEJ57" wrote in message ... Not happy with Nero--any other shareware or good but cheap cd burning software out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale |
#6
|
|||
|
|||
Nothing better than nero.
Make sure you get the latest updates. Tried to do that--download and upgrade to the most current version--but I get some type of copying file error and I it won't complete the install. Attempted to delete the older version and it still won't load. Downloaded from a different site and it won't load. Now can't install my old version because I can't find the darn sleeve for the CD with the country mile long key number...just not my day. Thanks for all the advice--anyone have a clue why I might be getting a SCSI/ATAPI command timeout error? I have gotten several burns out of about 30 tries--what usually happens is the burn fails about half to two-thirds through--showing like 35% on the read buffer, 63% of the burn complete, and 98% on the read buffer. Been selecting low rates (4, 8 speed--burner claims 32x) but doesn't seem to help. Should the program and data all be on the same drive? WIN95 is on the "C" drive, the data being copied and burned is on a different drive (a SCSI), and the nero program itself is yet on another drive--would that challenge the software in moving the data around, resulting in the high read buffer and the timeout error on the CD? PC is a 800mhz with lots of RAM (slips my mind just how much--I'll check when I boot next...) Dale |
#7
|
|||
|
|||
Hmmmm...Don't think so. Did you try both C 'n' B interfaces? It has 2, ya
know. Whatever. It does all I need easily and without coasters, especially different types of global images. HH "doS" wrote in message ... Nero has far more options. I try everything that comes along, at least once. "HH" wrote in message . .. Have you tried Click 'n' Burn Pro? I've tried Nero...wasn't impressed. Same for Roxio, Just Burn, etc. I like NeoDVD 2 Plus for burning DVDs. HH "doS" wrote in message ... Nothing better than nero. Make sure you get the latest updates. "DEJ57" wrote in message ... Not happy with Nero--any other shareware or good but cheap cd burning software out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale |
#8
|
|||
|
|||
hi, vcd easy is a real good tool. i'm using version 1.0.8, if
you want it and some info and aspi files i used with ME, i'll post it in alt.binaries.misc. here is the link to the site. Seems to be for mostly making VCDs--and I'm looking to simply burn data and music for the most part. Or does it also do that? As I'm on AOL trying to download a large file from an NG might not work... Dale |
#10
|
|||
|
|||
"Deep" wrote in message
le.rogers.com... I've had great success with Roxio. It is a little pricier though... It helps that I got it for free! And yes Dale, before you start on the copyright thing again, it was a legal CD that was given to me by Roxio. ;-) Deep "DEJ57" wrote in message ... Not happy with Nero--any other shareware or good but cheap cd burning software out there that anyone could recommend? Making a lot of coasters with Nero--hoping to find something else that works better (either that or I have a mystery problem with my PC and burner. Getting a lot of SCSI/ATAPI command timeout errors). Thanks, Dale I too have been using Roxio Easy CD Creator for almost two years and it hasn't given me any problems whatsoever. In fact it works great with my Compaq Presario 7000 system. -- Best regards, Don Kelloway Commodon Communications Visit http://www.commodon.com to learn about the "Threats to Your Security on the Internet". |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED - Alternate software for TV watching and recording with AIW | Paul Murphy | Ati Videocards | 2 | February 20th 05 04:20 PM |
help! NVIDIA GeForce2 MX 100/200 changes my settings... | Serial # 19781010 | Nvidia Videocards | 1 | September 7th 04 05:32 AM |
Another malfunctioning ATI software | Brian | Ati Videocards | 3 | July 16th 04 12:09 AM |
Cards with software. | John Russell | Ati Videocards | 0 | January 17th 04 11:57 PM |
CD Writer/ DVD Writer software on new build | HMSDOC | Homebuilt PC's | 0 | October 29th 03 12:01 PM |