If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Swapping monitor1 and monitor2
MSI Geforce 4600, Win 98SE, a Hitachi 752 as monitor1 and an InFocus
projector as monitor2. This is normally the desired configuration so that on power up, my desktop appears on the Hitachi. I mainly use the projector for DVD viewing and that' about it. But I like to game on the projector now and then so I just swap the projector vga cable to the monitor1 port at 1024x768 resolution. Some background ... late last night (why I do these things late I dunno) I decided to upgrade to the 45.23 drivers ... when all's done, my desktop appears on the projector (the projector appears as monitor1) ... arrg ... so I get that straightened away and say to myself ... hmmm ... there must be an easy way (regedit, I dunno) to force my desktop to run on either the Hitachi or the InFocus to facilitate gaming, showing slides etc. Can anybody out there help out ... I've done the rtfm thing ... so no point in suggesting that :-) |
#2
|
|||
|
|||
I think there is an option, Is Primary Display, or something like that.
-- Michael Culley "bowgus" wrote in message le.rogers.com... MSI Geforce 4600, Win 98SE, a Hitachi 752 as monitor1 and an InFocus projector as monitor2. This is normally the desired configuration so that on power up, my desktop appears on the Hitachi. I mainly use the projector for DVD viewing and that' about it. But I like to game on the projector now and then so I just swap the projector vga cable to the monitor1 port at 1024x768 resolution. Some background ... late last night (why I do these things late I dunno) I decided to upgrade to the 45.23 drivers ... when all's done, my desktop appears on the projector (the projector appears as monitor1) ... arrg ... so I get that straightened away and say to myself ... hmmm ... there must be an easy way (regedit, I dunno) to force my desktop to run on either the Hitachi or the InFocus to facilitate gaming, showing slides etc. Can anybody out there help out ... I've done the rtfm thing ... so no point in suggesting that :-) |
#3
|
|||
|
|||
last night (why I do these things late I dunno) I decided to upgrade
to the 45.23 drivers ... when all's done, my desktop appears on the projector (the projector appears as monitor1) ... arrg ... so I get that straightened away and say to myself ... hmmm ... there must be an easy way (regedit, I dunno) to force my desktop to run on either the Hitachi or the InFocus to facilitate gaming, showing slides etc. Can Since you are using Win98, you may not be able to do what you wish. If you go into Display\Settings and see that "Extend my Windows desktop onto this monitor" enabled for both monitors, then you are stuck...unless you are willing to make changes. If you are using NVidia's multimonitor support, then you should be able to adjust this. Just go into Display\Settings\Advanced\Your Card\NView Display Mode. Set the "Make this the primary display" option for whichever monitor you'd like the desktop on. From what it sounds like, you may want to try the "Clone" option in the "NView Display Mode" options. This will output the same image to both displays and change the display settings of the secondary monitor whenever the settings on the primary monitor change. You can use the "Full Screen Device" in the "Overlay Controls" to control which monitor DVDs play on. |
#4
|
|||
|
|||
It seems that with my Win98, I'm obliged as far as I can tell ... to check
the "Extend my windows desktop ..." box to enable the 2nd display. So I guess maybe when I updated the drivers, since my projector was on, it somehow became the primary ... I guess. Anyway, thanks for the help ... I've got a coupla dual monitor forums to search ... later. thanks again. "tq96" wrote in message ... last night (why I do these things late I dunno) I decided to upgrade to the 45.23 drivers ... when all's done, my desktop appears on the projector (the projector appears as monitor1) ... arrg ... so I get that straightened away and say to myself ... hmmm ... there must be an easy way (regedit, I dunno) to force my desktop to run on either the Hitachi or the InFocus to facilitate gaming, showing slides etc. Can Since you are using Win98, you may not be able to do what you wish. If you go into Display\Settings and see that "Extend my Windows desktop onto this monitor" enabled for both monitors, then you are stuck...unless you are willing to make changes. If you are using NVidia's multimonitor support, then you should be able to adjust this. Just go into Display\Settings\Advanced\Your Card\NView Display Mode. Set the "Make this the primary display" option for whichever monitor you'd like the desktop on. From what it sounds like, you may want to try the "Clone" option in the "NView Display Mode" options. This will output the same image to both displays and change the display settings of the secondary monitor whenever the settings on the primary monitor change. You can use the "Full Screen Device" in the "Overlay Controls" to control which monitor DVDs play on. |
Thread Tools | |
Display Modes | |
|
|