ITE raid drivers on a gigabyte board update

#1 September 1st 04, 11:38 AM

i am running the ITE raid drivers that are the mosr current according
to the gigabyte site for the GA-7N400 Pro2 v.2. yet if i go to the ITE
site there is a newer version of the ITE drivers out there. which
version should i use to be safe - the ones on the Gigabyte site or the
ITE site?

#2 September 1st 04, 01:52 PM

You should use the drivers from gigabyte , as the ITE drivers would be for
standalone cards.
Are you happy with the onboard raid performance ? I have the same board and
my raid performance
was just marginaly better than using my hdd's as standart ata100
I got a pci raid card and the raid performance nearly doubled to that of
using the drives as single ata100.
I was very disapointed with the onboards ata raid.

Regards Achim

"GolfNut" wrote in message
...
i am running the ITE raid drivers that are the mosr current according
to the gigabyte site for the GA-7N400 Pro2 v.2. yet if i go to the ITE
site there is a newer version of the ITE drivers out there. which
version should i use to be safe - the ones on the Gigabyte site or the
ITE site?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pc problems after g card upgrade + sp2	ben reed	Homebuilt PC's	9	November 30th 04 01:04 AM
Need help with SATA RAID 1 failure on A7N8X Delux	Cameron	Asus Motherboards	10	September 6th 04 11:50 PM
Asus P4C800 Deluxe ATA SATA and RAID Promise FastTrack 378 Drivers and more.	Julian	Asus Motherboards	2	August 11th 04 12:43 PM
How to set up RAID 0+1 on P4C800E-DLX MB -using 4 SATA HDD's & 2 ATA133 HHD?	Data Wing	Asus Motherboards	2	June 5th 04 03:47 PM
P4C800 Deluxe - RAID / SATA / 1.30 update?	Icer	Asus Motherboards	1	July 6th 03 05:15 PM