A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Anu Comments on this ram



 
 
Thread Tools Display Modes
  #1  
Old April 18th 04, 02:51 AM
Don Murphy
external usenet poster
 
Posts: n/a
Default Anu Comments on this ram

I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.

Thank You
Don Murphy
  #2  
Old April 18th 04, 12:59 PM
S.Heenan
external usenet poster
 
Posts: n/a
Default

Don Murphy" murphy"don wrote:
I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.



Here's the PC3200 list from Gigabyte:
http://www.giga-byte.com/MotherBoard...gyGuide_73.htm

Crucial
http://www.crucial.com/store/listpar...NNXP&submit=Go


Chances are good both Kingston and Muskin will work, provided you set speeds
and timings manually. You want non-ECC and unregistered PC3200 or faster.


  #3  
Old April 18th 04, 05:35 PM
Don Murphy
external usenet poster
 
Posts: n/a
Default

Thank You

Don Murphy

On Sun, 18 Apr 2004 11:59:47 GMT, "S.Heenan" wrote:

Don Murphy" murphy"don wrote:
I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.



Here's the PC3200 list from Gigabyte:
http://www.giga-byte.com/MotherBoard...gyGuide_73.htm

Crucial
http://www.crucial.com/store/listpar...NNXP&submit=Go


Chances are good both Kingston and Muskin will work, provided you set speeds
and timings manually. You want non-ECC and unregistered PC3200 or faster.


  #4  
Old April 18th 04, 06:34 PM
S.Heenan
external usenet poster
 
Posts: n/a
Default

Don Murphy" murphy"don wrote:
Thank You

Don Murphy

On Sun, 18 Apr 2004 11:59:47 GMT, "S.Heenan" wrote:

Don Murphy" murphy"don wrote:
I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.



Here's the PC3200 list from Gigabyte:

http://www.giga-byte.com/MotherBoard...gyGuide_73.htm

Crucial

http://www.crucial.com/store/listpar...NNXP&submit=Go


Chances are good both Kingston and Muskin will work, provided you
set speeds and timings manually. You want non-ECC and unregistered
PC3200 or faster.



If you have no plans to exceed 200MHz, overclock, buying PC3500 or better is
unnecessary.


  #5  
Old April 19th 04, 01:43 AM
Don Murphy
external usenet poster
 
Posts: n/a
Default

On Sun, 18 Apr 2004 17:34:27 GMT, "S.Heenan" wrote:

Don Murphy" murphy"don wrote:
Thank You

Don Murphy

On Sun, 18 Apr 2004 11:59:47 GMT, "S.Heenan" wrote:

Don Murphy" murphy"don wrote:
I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.


Here's the PC3200 list from Gigabyte:

http://www.giga-byte.com/MotherBoard...gyGuide_73.htm

Crucial

http://www.crucial.com/store/listpar...NNXP&submit=Go


Chances are good both Kingston and Muskin will work, provided you
set speeds and timings manually. You want non-ECC and unregistered
PC3200 or faster.



If you have no plans to exceed 200MHz, overclock, buying PC3500 or better is
unnecessary.

I have no plans to overclock. I need stable as this is a workstation
that I will be doing video editing on. I se now I only need PC3200
and I can get a better deal on Mushkin PC3200.

Thank You
Don Murphy

  #6  
Old April 19th 04, 02:56 AM
S.Heenan
external usenet poster
 
Posts: n/a
Default

Don Murphy" murphy"don wrote:
Chances are good both Kingston and Muskin will work, provided you
set speeds and timings manually. You want non-ECC and unregistered
PC3200 or faster.



If you have no plans to exceed 200MHz, overclock, buying PC3500 or
better is unnecessary.

I have no plans to overclock. I need stable as this is a workstation
that I will be doing video editing on. I se now I only need PC3200
and I can get a better deal on Mushkin PC3200.



By all means, buy the Mushkin PC3200. Excellent stuff. I understand Fry's
has it on special from time to time.


  #7  
Old April 19th 04, 04:02 AM
Zac
external usenet poster
 
Posts: n/a
Default

Outpost had the Geil DDR400 dual "Basic" kits (512 and 1gig) on sale
for $189 last week. So far I've been very impressed and they are dead
stable at a much higher overclock then my previous Crucial sticks.
Despite their rated timing of 2.5, 4, 4, 8 even geil tech support says
to set them to 2.5, 3, 3, 6 and sure enough, they're dead stable at
this timing.

Zac

"S.Heenan" wrote in message news:[email protected]
Don Murphy" murphy"don wrote:
Thank You

Don Murphy

On Sun, 18 Apr 2004 11:59:47 GMT, "S.Heenan" wrote:

Don Murphy" murphy"don wrote:
I have now received my K8NNXP and am now looking at ram. I have it
down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either
of these. I have used Mushkin in the past and their ram has always
worked well for me. I have never had to return 1 stick.


Here's the PC3200 list from Gigabyte:

http://www.giga-byte.com/MotherBoard...gyGuide_73.htm

Crucial

http://www.crucial.com/store/listpar...NNXP&submit=Go


Chances are good both Kingston and Muskin will work, provided you
set speeds and timings manually. You want non-ECC and unregistered
PC3200 or faster.



If you have no plans to exceed 200MHz, overclock, buying PC3500 or better is
unnecessary.

  #8  
Old April 19th 04, 11:00 AM
S.Heenan
external usenet poster
 
Posts: n/a
Default

Zac wrote:
Outpost had the Geil DDR400 dual "Basic" kits (512 and 1gig) on sale
for $189 last week. So far I've been very impressed and they are dead
stable at a much higher overclock then my previous Crucial sticks.
Despite their rated timing of 2.5, 4, 4, 8 even geil tech support says
to set them to 2.5, 3, 3, 6 and sure enough, they're dead stable at
this timing.


Crucial is a fine product, at or very near rated speed. I use it often, with
good results. It is not the best choice for overclocking. Corsair, Mushkin,
some BuffaloTech, and from what you report, Geil, are better choices.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Comments on the following Abit MB's Woodchuck Homebuilt PC's 4 January 27th 05 02:03 AM
comments on system needed.... Charlie Asus Motherboards 1 August 21st 04 09:49 AM
New NF7-s Build Specs. Comments, please? Joe Blobbs Homebuilt PC's 2 January 28th 04 11:57 PM
first time build- comments on components kietz Homebuilt PC's 0 December 18th 03 07:11 AM
Comments about ASUS PC-DL Mik Asus Motherboards 0 October 20th 03 03:05 AM


All times are GMT +1. The time now is 07:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.