|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
February 16th 06, 02:11 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
My Monitor won't show anything
Hey, I have a KV8 Pro Motherboard I've connected everything, power turns on, fans works, But my monitor won't show anything..it just goes straight to standby. I've tried several other monitors but they do the same thing. The motherboard shows the 2 LEDs lit one green and one red The post code is 9.0 There's not even a beep. System Specifications CPU: AMD Sempron 2600+ Power Supply: Sprite 500W http://www.overclockers.co.nz/product/psu/jsp.shtml RAM: Crucial 512MB 184-pin DIMM DDR PC3200 CL=3 UNBUFFERED NON-ECC DDR400 http://www.ebuyer.com/customer/produ...duct_uid=46420 Graphics Card: PNY Verto GeForce 6 6600GT AGP8x 128MB GDDR3 http://www.ebuyer.com/customer/produ...duct_uid=81344 I've really had enough, but i don't want to buy a new board Please help me. Thank you for your time. -- Chibi Goku ------------------------------------------------------------------------ Chibi Goku's Profile: http://www.highdots.net/m67 View this thread: http://www.highdots.net/t173471 
|
|
#2
February 16th 06, 03:25 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
Chibi Goku wrote:
I've connected everything, power turns on, fans works, But my monitor won't show anything..it just goes straight to standby. Have you tried clearing the CMOS? The jumper location and further instructions are in the manual.
|
|
#3
February 16th 06, 05:37 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
On Thu, 16 Feb 2006 15:25:58 +0000, Ville Muikkula wrote:
Chibi Goku wrote: I've connected everything, power turns on, fans works, But my monitor won't show anything..it just goes straight to standby. Have you tried clearing the CMOS? The jumper location and further instructions are in the manual. Are you using an addon graphics card? It could be that your motherboard has integrated graphics that are set as the default and are being initialized as the primary display. Inspect the ports on the motherboard carefully and see if you've overlooked an integrated graphics card. Brian K
|
|
#4
February 16th 06, 06:10 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
Ville Muikkula Wrote: Chibi Goku Chibi.Goku.23buq0 (AT) no-mx (DOT) forums.yourdomain.com.au wrote: Have you tried clearing the CMOS? The jumper location and further instructions are in the manual. Yeah i've already done that. Brian K Wrote: On Thu, 16 Feb 2006 15:25:58 +0000, Ville Muikkula wrote: Are you using an addon graphics card? It could be that your motherboard has integrated graphics that are set as the default and are being initialized as the primary display. Inspect the ports on the motherboard carefully and see if you've overlooked an integrated graphics card. Brian K The KV8 Pro doesn't come with integrated graphics...you have to have an graphics card. Anything else i can do?  -- Chibi Goku ------------------------------------------------------------------------ Chibi Goku's Profile: http://www.highdots.net/m67 View this thread: http://www.highdots.net/t173471
|
|
#5
February 16th 06, 09:22 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
On Thu, 16 Feb 2006 09:11:45 -0500, Chibi Goku wrote:
Hey, I have a KV8 Pro Motherboard I've connected everything, power turns on, fans works, But my monitor won't show anything..it just goes straight to standby. I've tried several other monitors but they do the same thing. The motherboard shows the 2 LEDs lit one green and one red The post code is 9.0 There's not even a beep. System Specifications CPU: AMD Sempron 2600+ You need bios version 23 or later (24) to support this cpu. You bought a discontinued MB. I suspect it came with an early bios. I think they list the bios version on a sticker on the board somewhere. If you have an older bios, you're screwed unless you can borrow an older cpu to flash with. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org http://mysettopbox.tv/knoppmyth.html Usenet alt.video.ptv.mythtv My server http://wesnewell.no-ip.com/cpu.php
|
|
#6
February 16th 06, 09:38 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
Chibi Goku wrote:
Anything else i can do? Maybe the BIOS version is too old to support your CPU revision?
|
|
#7
February 17th 06, 10:34 PM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
On the motherbaord...it says v1.1...is that old? -- Chibi Goku ------------------------------------------------------------------------ Chibi Goku's Profile: http://www.highdots.net/m67 View this thread: http://www.highdots.net/t173471
|
|
#8
February 18th 06, 12:16 AM
posted to alt.comp.hardware.amd.x86-64
|
|||
|
|||
|
My Monitor won't show anything
Chibi Goku wrote:
On the motherbaord...it says v1.1...is that old? That is the circuit board version. It might be that you have to troubleshoot the computer by swapping parts into another, working system.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cannot get Nero Show Time working | Terry Pinnell | Cdr | 2 | October 16th 05 04:13 PM |
| CPU started overheating for no reason | [email protected] | General | 1 | September 13th 05 02:28 PM |
| CES 2005: Show Stopping Photos From Day 3 | Ablang | General | 0 | January 9th 05 03:39 AM |
| Utility to show memory info ? | half_pint | General | 1 | April 28th 04 03:35 AM |
| Hard disk does not show in BIOS. Extract data from HDD? | Kanolsen | General | 1 | November 14th 03 10:03 PM |
Linear Mode
