If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Geforce FX5700 ultra Core Clock Speed
All the info I read about my vid card says it has a core clock speed of
475Mhz but RivaTuner is telling me I currently have a speed of 300Mhz. Is the 475Mhz figure a maximum quoted or should it be a normal speed. Could I be getting a reduced speed because Im at AGP 4x or could it be because I have softQuadro'd it to a QuadroFX1100 Anyone got any idea on a reasonable overclock speed I want to be aiming for. Thanks. Aw |
#2
|
|||
|
|||
ypur agp setting won`t affect the core speed. It`s likely the quadro bios
makes it run slower. your o/c speed will depwnd on wether you replace the stock hsf with better equipment. you could add a heatpipe if you have space in the case for one, then you could really get high core and mem speeds. "Aw" wrote in message ... All the info I read about my vid card says it has a core clock speed of 475Mhz but RivaTuner is telling me I currently have a speed of 300Mhz. Is the 475Mhz figure a maximum quoted or should it be a normal speed. Could I be getting a reduced speed because Im at AGP 4x or could it be because I have softQuadro'd it to a QuadroFX1100 Anyone got any idea on a reasonable overclock speed I want to be aiming for. Thanks. Aw |
#3
|
|||
|
|||
Thanks for the info's
If you did not have riva tuner installed then would the card automatically select the faster/slower clock speeds when required also with RT installed will the card still auto select the correct core speed when necessary. AW "ginfest" wrote in message news:58%_b.398863$xy6.2300784@attbi_s02... "Sunbow" wrote in message ... ypur agp setting won`t affect the core speed. It`s likely the quadro bios makes it run slower. your o/c speed will depwnd on wether you replace the stock hsf with better equipment. you could add a heatpipe if you have space in the case for one, then you could really get high core and mem speeds. "Aw" wrote in message ... All the info I read about my vid card says it has a core clock speed of 475Mhz but RivaTuner is telling me I currently have a speed of 300Mhz. Is the 475Mhz figure a maximum quoted or should it be a normal speed. Could I be getting a reduced speed because Im at AGP 4x or could it be because I have softQuadro'd it to a QuadroFX1100 Anyone got any idea on a reasonable overclock speed I want to be aiming for. Thanks. Aw Your card has 2 speeds, 300 is the 2d speed, 475 is the 3d speed. The 5700, 5900 and 5950 run at 300 for 2d work, and only speed up to the higher speed when doing 3d-this keeps the fan(s) at low speed until needed. In Rivatuner on the "Overclocking" tab look next to the "Enable driver-level hardware overclocking", there is a "drop-down" box, see if it is "says" "standard 2d", click on the arrow and you should see "performance(3d) as a second choice-select that and your 475 should show up. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.593 / Virus Database: 376 - Release Date: 2/20/2004 |
#4
|
|||
|
|||
"Aw" wrote in message ... Thanks for the info's If you did not have riva tuner installed then would the card automatically select the faster/slower clock speeds when required also with RT installed will the card still auto select the correct core speed when necessary. AW Yes it's automatic, in 2d it runs the lower speed, in 3d it runs the higher. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.593 / Virus Database: 376 - Release Date: 2/20/2004 |
#5
|
|||
|
|||
Thanks ginfest, out of interest what sort of speeds would I be able to
(comfortably) overclock this card to 2D+3D, any idea ? AW. "ginfest" wrote in message news:Cv9%b.404246$xy6.2304102@attbi_s02... "Aw" wrote in message ... Thanks for the info's If you did not have riva tuner installed then would the card automatically select the faster/slower clock speeds when required also with RT installed will the card still auto select the correct core speed when necessary. AW Yes it's automatic, in 2d it runs the lower speed, in 3d it runs the higher. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.593 / Virus Database: 376 - Release Date: 2/20/2004 |
#6
|
|||
|
|||
"Aw" wrote in message ... Thanks ginfest, out of interest what sort of speeds would I be able to (comfortably) overclock this card to 2D+3D, any idea ? AW. In 2D there really isn't a need to oc, no sense heating up the card and having the fans run full speed. In 3D I'm not sure on the 5700, I'm running the 5900 which I've clocked to 475 core/950mem. I should think that a quick Google search on "5700 overclocking" would give a rough idea although all cards are different. g'luck --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.596 / Virus Database: 379 - Release Date: 2/26/2004 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
XP 3500 socket 939 high cpu temps? | Don Burnette | AMD x86-64 Processors | 32 | February 11th 05 10:33 AM |
AMD Nomenclature? | Adjacent | AMD x86-64 Processors | 18 | November 20th 04 12:00 PM |
Need help controlling clock speed in Mandrake 10.0 AMD64 (Cool & Quiet) | General Schvantzkoph | AMD x86-64 Processors | 3 | August 15th 04 06:21 PM |
GeForce 6800 Ultra (256 Mb) | F.O.R. | General | 1 | August 7th 04 02:20 AM |
Synchronized graphics core and memory speed? | [email protected] | Overclocking | 1 | December 17th 03 07:22 PM |