If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1.5GB ram dual channel
got 1.5 GB of ram in 4 sticks to use in my GA-8IPE1000-G m/b in dual channel
mode. will it work? The sticks are 2x512 and 2x256 all ddr500 so i can o/c my P4 3GHz cpu. thanks in advance |
#2
|
|||
|
|||
1.5GB ram dual channel
Son Of LaL schrieb:
got 1.5 GB of ram in 4 sticks to use in my GA-8IPE1000-G m/b in dual channel mode. will it work? The sticks are 2x512 and 2x256 all ddr500 so i can o/c my P4 3GHz cpu. thanks in advance I have a GA-8IPE1000-G Rev.3.x and the manual says that you need 4 sticks with the same specs (i.e. "the same memory size and type" - p. 15 Nr. 4) for dual channel. So you may start with 2x512 (and try o'c) and add 2x256 later on... Roy |
#3
|
|||
|
|||
1.5GB ram dual channel
"Roy Coorne" wrote in message ... Son Of LaL schrieb: got 1.5 GB of ram in 4 sticks to use in my GA-8IPE1000-G m/b in dual channel mode. will it work? The sticks are 2x512 and 2x256 all ddr500 so i can o/c my P4 3GHz cpu. thanks in advance I have a GA-8IPE1000-G Rev.3.x and the manual says that you need 4 sticks with the same specs (i.e. "the same memory size and type" - p. 15 Nr. 4) for dual channel. So you may start with 2x512 (and try o'c) and add 2x256 later on... Roy thought that myself but just checking if anyone`s done it. like you say i`ll try the 1GB set then ad the 1/2GB set later, see how i go.. |
#4
|
|||
|
|||
1.5GB ram dual channel
"Son Of LaL" wrote in message ... "Roy Coorne" wrote in message ... Son Of LaL schrieb: got 1.5 GB of ram in 4 sticks to use in my GA-8IPE1000-G m/b in dual channel mode. will it work? The sticks are 2x512 and 2x256 all ddr500 so i can o/c my P4 3GHz cpu. thanks in advance I have a GA-8IPE1000-G Rev.3.x and the manual says that you need 4 sticks with the same specs (i.e. "the same memory size and type" - p. 15 Nr. 4) for dual channel. So you may start with 2x512 (and try o'c) and add 2x256 later on... Roy thought that myself but just checking if anyone`s done it. like you say i`ll try the 1GB set then ad the 1/2GB set later, see how i go.. I can confirm (if its anything like my Gigabyte s939) that it wont run with 3 dimms. BillL |
#5
|
|||
|
|||
1.5GB ram dual channel
"BillL" wrote in message . uk... "Son Of LaL" wrote in message ... "Roy Coorne" wrote in message ... Son Of LaL schrieb: got 1.5 GB of ram in 4 sticks to use in my GA-8IPE1000-G m/b in dual channel mode. will it work? The sticks are 2x512 and 2x256 all ddr500 so i can o/c my P4 3GHz cpu. thanks in advance I have a GA-8IPE1000-G Rev.3.x and the manual says that you need 4 sticks with the same specs (i.e. "the same memory size and type" - p. 15 Nr. 4) for dual channel. So you may start with 2x512 (and try o'c) and add 2x256 later on... Roy thought that myself but just checking if anyone`s done it. like you say i`ll try the 1GB set then ad the 1/2GB set later, see how i go.. I can confirm (if its anything like my Gigabyte s939) that it wont run with 3 dimms. BillL good job i`ve got 4 then! :-) put then all in today and - ta da - dual channel. now for some serious overclocking! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dual Channel memory | Igor | AMD x86-64 Processors | 2 | November 22nd 04 02:27 AM |
Memory suggestion | Norm | Asus Motherboards | 7 | October 23rd 04 03:23 PM |
Dual Channel Memory support | Bobby | General Hardware | 1 | April 29th 04 11:33 PM |
Dual channel DDR ? | Deadly_M | Overclocking | 18 | January 4th 04 04:25 PM |
Dual Channel Memory Question... | KJ Wright | Intel | 0 | October 14th 03 04:34 AM |