|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
October 16th 04, 06:38 PM
|
|||
|
|||
material for recharge ink hp
Hi to everybody.
Is there anybody that knows a firm that can furnish to a privacy of the material for the regeneration of the cartridges? I live in italy and I have not succeeded in finding the material that I look for yet. The clipses of closing of the cartridges 6578 and other material would serve me... Thanks in advance. 
|
|
#2
October 17th 04, 07:48 AM
|
|||
|
|||
|
Clips and ink at
http://www.bs-print.co.uk/refill-hp-...cartridges.htm I've used their ink, it's good. "=:-)" wrote in message ... Hi to everybody. Is there anybody that knows a firm that can furnish to a privacy of the material for the regeneration of the cartridges? I live in italy and I have not succeeded in finding the material that I look for yet. The clipses of closing of the cartridges 6578 and other material would serve me... Thanks in advance.
|
|
#3
October 17th 04, 10:40 AM
|
|||
|
|||
|
......THANKS....
"SteveB" sbrads@nildramDOTcoDOTuk ha scritto nel messaggio .. . Clips and ink at http://www.bs-print.co.uk/refill-hp-...cartridges.htm I've used their ink, it's good. "=:-)" wrote in message ... Hi to everybody. Is there anybody that knows a firm that can furnish to a privacy of the material for the regeneration of the cartridges? I live in italy and I have not succeeded in finding the material that I look for yet. The clipses of closing of the cartridges 6578 and other material would serve me... Thanks in advance.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Removing phase change material from heatsink??? | Barry Ward | Homebuilt PC's | 12 | May 15th 04 08:16 AM |
| Phase change material for CPU cooling -- what melting temperature is best? | larrymoencurly | Homebuilt PC's | 3 | February 7th 04 08:36 AM |
| Artic Aluminum or "Phase change" material? | SomeBody | Overclocking AMD Processors | 5 | January 9th 04 03:39 AM |
| replacing stock AMD phase-change material | Matt | Overclocking | 1 | September 7th 03 05:30 AM |
| replacing stock AMD phase-change material | Matt | Homebuilt PC's | 1 | September 7th 03 05:30 AM |
Linear Mode
