If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
K8NS Pro and memory settings
My two 512 MB sticks of Corsair memory don't work on this mobo at 200
MHz. BIOS shows 166 MHz. When I use a single stick I get the full speed. I cannot set the speed in the BIOS, since the clock speed for DDRAM is grayed out. When I set it via EazyTune it does not keep that value. How can I set this memory to work at full speed? Thanks, Andy |
#2
|
|||
|
|||
"Andy" wrote in message om... My two 512 MB sticks of Corsair memory don't work on this mobo at 200 MHz. BIOS shows 166 MHz. When I use a single stick I get the full speed. I cannot set the speed in the BIOS, since the clock speed for DDRAM is grayed out. When I set it via EazyTune it does not keep that value. How can I set this memory to work at full speed? Thanks, What bios version do you have? Note that in the specs for DDR two sticks are supposed to run at 166mhz, but you can get them to run faster in most boards. |
Thread Tools | |
Display Modes | |
|
|