If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ledatek A310TD MyVivo (FX5600) - does not recognize Tv
Ok, here we go .......
Problem Summary: ------------------- The tv is connected to the svhs port but is not detected My UNoverclocked system: -------------------------- cpu: amd 1800+ mobo: epox 8kha+ (via 266A) ram: 256 infineon vga: leadtek A310 TD MyVivo os: win xp pro sp1 drivers chipset: 4in1 4.48 drivers vga: nvidia_45.23, leadtek_44.69, Nnidia_WDM-Vivo_2.13 The Setup: -------------- the tv is connected to the graphics card via the so called 'vivo-cable' plus a 3 meter composite extension cable. the vivo-cable is connected to the svhs port of the graphics card. another option is to connect the vcr in a similar way using a scart- composite or a scart-svhs adaptor. The Procedu --------------- 1. Deinstallation of old drivers (matrox) 2. exchange of old an new board in the system - boot 3. installation of latest reseller drivers (leadtek) - reboot 4. connect tv set to card, switch tv set on - reboot 5. attempt to configure the displays in Display properties - failure 6. Trouble shooting: Various driver versions together with latest wdm drivers and without; Various connection options of tv and vcr; Bios upgrade of mobo; press the 'detect device' button a dozen times. I even made a _fresh install_ on an extra partition. The Problem/Failu ---------------------- No matter what I do the Tv- set is neither recognized by the card nor by windows (device manager). With my old matrox I never had a problem like that. so, the tv set does not seem to be the problem. On the gforce tab in the display properties, I sometimes do not even get the 'nview' entry in the tree window. instead there is an entry 'display adjustments'. -------------------------- -------------------------- Ok now, please make my day and give me hint. Cheers and thanks a lot! PS: The current Leadtek is the second card i have put in my system. the first attempt was with the comparable sparkle version. |
#2
|
|||
|
|||
"Fedor Allgeier" wrote in message ... Ok, here we go ....... Problem Summary: ------------------- The tv is connected to the svhs port but is not detected My UNoverclocked system: -------------------------- cpu: amd 1800+ mobo: epox 8kha+ (via 266A) ram: 256 infineon vga: leadtek A310 TD MyVivo os: win xp pro sp1 drivers chipset: 4in1 4.48 drivers vga: nvidia_45.23, leadtek_44.69, Nnidia_WDM-Vivo_2.13 The Setup: -------------- the tv is connected to the graphics card via the so called 'vivo-cable' plus a 3 meter composite extension cable. the vivo-cable is connected to the svhs port of the graphics card. another option is to connect the vcr in a similar way using a scart- composite or a scart-svhs adaptor. The Procedu --------------- 1. Deinstallation of old drivers (matrox) 2. exchange of old an new board in the system - boot 3. installation of latest reseller drivers (leadtek) - reboot 4. connect tv set to card, switch tv set on - reboot 5. attempt to configure the displays in Display properties - failure 6. Trouble shooting: Various driver versions together with latest wdm drivers and without; Various connection options of tv and vcr; Bios upgrade of mobo; press the 'detect device' button a dozen times. I even made a _fresh install_ on an extra partition. The Problem/Failu ---------------------- No matter what I do the Tv- set is neither recognized by the card nor by windows (device manager). With my old matrox I never had a problem like that. so, the tv set does not seem to be the problem. On the gforce tab in the display properties, I sometimes do not even get the 'nview' entry in the tree window. instead there is an entry 'display adjustments'. -------------------------- -------------------------- Ok now, please make my day and give me hint. Cheers and thanks a lot! PS: The current Leadtek is the second card i have put in my system. the first attempt was with the comparable sparkle version. I spent an hour troubleshooting a machine with exactly this problem last week only to find out that he had hooked it up to the video in port on the vivo cable not the video out. I am really not trying to make you look silly but maybe just worth a double check. |
#3
|
|||
|
|||
i have same card and rather than messing about i just got TV Tool 8.3 , does
the job perfect, i know thats not a solution to ure specific problem, but its still a solution Jon |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ATI 9600 Pro V's Geforce FX5600 (non ultra) | Trevor Marsh | Ati Videocards | 3 | September 24th 03 09:32 AM |