If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Heat pipes
I recently upgraded to a Barton 3000+, my temp raised to high 50's under a
load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. |
#2
|
|||
|
|||
Take all your case panels off - that'll cool it down some.
"Norm" I'm wrote in message news:bjNNc.1711$MP4.141@lakeread07... I recently upgraded to a Barton 3000+, my temp raised to high 50's under a load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. |
#3
|
|||
|
|||
Norm wrote:
I recently upgraded to a Barton 3000+, my temp raised to high 50's under a load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. heat pipes are just a heat movement technique, thats all, they just make the heatsink a bit better don't go out of your way to buy one, if you find a heatsink is better and it doesn't have one than a heatsink with a heat pipe, you buy the one without the heat pipe arn't those Volcano things rubbish ? noisy ? fair while since i looked at coolers really |
#4
|
|||
|
|||
On Wed, 28 Jul 2004 07:51:19 -0500, Norm wrote:
I recently upgraded to a Barton 3000+, my temp raised to high 50's under a load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. It never ceases to amaze me how many overclockers on this newsgroup fail to take into account ambient temperature when they talk about their CPU temperature concerns. Under load, your CPU getting to 58C is pretty normal given your circumstances, especially if the ambient temperature of the room where your computer is about 25C? Am I right? Put that computer in a room at 18C and I bet your CPU under load temps drop to 50C or less. I have an XP2500 overclocked to an XP3200, 1.75v, with a Vantec Aeroflow fan, 1 80mm rear case fan and the 2 power supply fans. My CPU under load gets to about 56C when the room temp is 25C, in the winter when my room temp is about 18C my CPU under load never gets above about 46C. If you can improve your ambient environment, by improving airflow around the outside of your case, reducing direct sunlight into your computer room, putting aircon on, having a fan blow cold air into and hot air up and out of a window in your room, will be a much better solution than spending money on heat pipes or water cooling. Besides high 50's under load is not that bad. If it gets above 60 frequently you might want to be concerned. Larry Gagnon, A+ certified tech. |
#5
|
|||
|
|||
same here. my room is very hot in the summer. 31 degrees tonight! Yes in
england aswell! My temperatures load are 50 degrees, with 4 case fans, and a decent cpu cooler! in summer my load rarely goin above 42. I had the thermaltake volcanoe 9 and changed it for number 12 and my tempertures went down by a few degrees. All copper heatsink probably did it. dan "Larry Gagnon" wrote in message news On Wed, 28 Jul 2004 07:51:19 -0500, Norm wrote: I recently upgraded to a Barton 3000+, my temp raised to high 50's under a load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. It never ceases to amaze me how many overclockers on this newsgroup fail to take into account ambient temperature when they talk about their CPU temperature concerns. Under load, your CPU getting to 58C is pretty normal given your circumstances, especially if the ambient temperature of the room where your computer is about 25C? Am I right? Put that computer in a room at 18C and I bet your CPU under load temps drop to 50C or less. I have an XP2500 overclocked to an XP3200, 1.75v, with a Vantec Aeroflow fan, 1 80mm rear case fan and the 2 power supply fans. My CPU under load gets to about 56C when the room temp is 25C, in the winter when my room temp is about 18C my CPU under load never gets above about 46C. If you can improve your ambient environment, by improving airflow around the outside of your case, reducing direct sunlight into your computer room, putting aircon on, having a fan blow cold air into and hot air up and out of a window in your room, will be a much better solution than spending money on heat pipes or water cooling. Besides high 50's under load is not that bad. If it gets above 60 frequently you might want to be concerned. Larry Gagnon, A+ certified tech. |
#6
|
|||
|
|||
"Larry Gagnon" wrote in message news On Wed, 28 Jul 2004 07:51:19 -0500, Norm wrote: I recently upgraded to a Barton 3000+, my temp raised to high 50's under a load. I would like to get that down somewhat. I read a some reviews on heat pipes....which one is a good investment...based on actual experiences My MB is an A7N8X with a Volcano 11 and AS5. My case has 2 x 120mm fans and a dual fan PS. It never ceases to amaze me how many overclockers on this newsgroup fail to take into account ambient temperature when they talk about their CPU temperature concerns. Under load, your CPU getting to 58C is pretty normal given your circumstances, especially if the ambient temperature of the room where your computer is about 25C? Am I right? Put that computer in a room at 18C and I bet your CPU under load temps drop to 50C or less. I have an XP2500 overclocked to an XP3200, 1.75v, with a Vantec Aeroflow fan, 1 80mm rear case fan and the 2 power supply fans. My CPU under load gets to about 56C when the room temp is 25C, in the winter when my room temp is about 18C my CPU under load never gets above about 46C. If you can improve your ambient environment, by improving airflow around the outside of your case, reducing direct sunlight into your computer room, putting aircon on, having a fan blow cold air into and hot air up and out of a window in your room, will be a much better solution than spending money on heat pipes or water cooling. Besides high 50's under load is not that bad. If it gets above 60 frequently you might want to be concerned. Larry Gagnon, A+ certified tech. You are right!! current ambient temperature is 25c to higher, based on the thermostat, that is located in the other room. The computer room temp will change depending on time of the day and if the sun is hitting the windows (no direct sunlight though). I live in a warm climate, the temps in the summer are brutal. We turn on the aircon in May and it could stay on until November or early December.. Oh..btw....nothing is overclocked (yet)..:-). I don't think the wife would appreciate me setting the aircon to 64F....I could buy many different cooling devices based on increase in monthly electric bill. However, Larry I really appreciate the insight...and will work on a way to get the ambient temperature under control...thanks |
#7
|
|||
|
|||
"Ed" wrote in message ... On Wed, 28 Jul 2004 19:06:08 -0500, "Norm" I'm wrote: Besides high 50's under load is not that bad. If it gets above 60 frequently you might want to be concerned. I've never had any problems running AMD's hot, I think most people over cool, 60C + die temps under full loads here w/no problems, been using AMD's since the K5. Cheers, Ed Yea, I think what ed says is probably right, no biggie in the temps being around the 60-65 range (as long as that's cpu die temp, and not the socket temp) Tho, I know what it's like down in louisiana, and if you want to keep your pc cool then watercooling MIGHT just be the way to go if your up for the work Put the radiator (or capacity tank) under ground (just as long as it's 6 inches or so below the surface) say under your house.. and it should keep it cool enough to use .. |
#8
|
|||
|
|||
"rstlne" wrote in message
... "Ed" wrote in message ... On Wed, 28 Jul 2004 19:06:08 -0500, "Norm" I'm wrote: Besides high 50's under load is not that bad. If it gets above 60 frequently you might want to be concerned. I've never had any problems running AMD's hot, I think most people over cool, 60C + die temps under full loads here w/no problems, been using AMD's since the K5. Cheers, Ed Yea, I think what ed says is probably right, no biggie in the temps being around the 60-65 range (as long as that's cpu die temp, and not the socket temp) Tho, I know what it's like down in louisiana, and if you want to keep your pc cool then watercooling MIGHT just be the way to go if your up for the work Put the radiator (or capacity tank) under ground (just as long as it's 6 inches or so below the surface) say under your house.. and it should keep it cool enough to use .. As an update.... I re-applied AS5 to make sure there was no problem there.. I do understand my temp are ok...I just wanted to get them down a few notches. I would be happy if they were in the low 50's. Currently MM5 reads socket temp about 2 -3c less than the diode. Thanks everyone for their input NC |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
R9800NP - overclocking problem | power_ranger | Overclocking | 20 | April 19th 04 08:08 AM |
Processor Heat Sink Repair/fine tuning | Overclocking AMD Processors | 1 | January 17th 04 11:27 PM | |
heat pad or heat sink compound? | Larry Gagnon | Overclocking AMD Processors | 1 | November 16th 03 07:38 PM |
Opteron Overclocking? | Adrian Richards | Overclocking AMD Processors | 9 | October 5th 03 03:20 PM |
rather straightforward heat problem | Jan Biel | General | 3 | August 25th 03 08:14 PM |