A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Converting RAID 0 array to RAID 0+1 - Advice sought.



 
 
Thread Tools Display Modes
  #1  
Old December 1st 03, 04:40 PM
Mod
external usenet poster
 
Posts: n/a
Default Converting RAID 0 array to RAID 0+1 - Advice sought.

Hi.
I've just built a new machine and have created a stripe set therein
using a Promise FastTrak 100 TX2 controller and 2 Western Digital
WD800JB hard Drives.

Now, I opted to use the PCI IDE controller as I thought it may be
slightly safer than the onboard one inasmuch as I could always move it
and the drives 'as is' to another machine if anything went wrong with
any of the other components.

Am I right in this assumption or should I have used the onboard
controller? Will the PCI bus' bandwidth limitations have an adverse
affect on speeds or is this negligible? My system specs are included
at the bottom of this post.

Anyway, i'm digressing a little here as the main pont of this post is
to determine how I go about converting this 2 drive RAID 0 array into
a 4 drive RAID 0+1 setup as soon as I get another 2 drives. Can this
be done non-destructively?
i.e Will I be able to merely connect each of the two drives as a slave
on each channel and simply enter the FastBuild utility and rebuild the
array so that the existing setup is just mirrored onto the two new
drives?

It would save me a lot of trouble if I can do it this way as the
current stripe set holds my OS etc.
Anyway, thanks in advance for any advice you may have to offer.
Cheers.
Mod.



=========================== SYSTEM SPECS
==================================================

Intel Pentium 4 3.0GHz (800FSB) with HT Technology - Retail x 1

Asus P4C800-E Deluxe "Canterwood" (Socket 478) Motherboard x 1

Corsair 1GB DDR XMS3200C2PT TwinX (2x512MB) CAS2 x 1

Samsung SW-252B 52x/52x/24x CD-ReWriter (Black) - OEM x 1

Samsung SD-616QBB 16x48x DVD-ROM (Black) - OEM x 1

Sapphire ATI Radeon 9600 Pro 128MB DDR TV-Out/DVI - Retail x 1

Akasa Paxmate Acoustic Absorption Mat x 1


Antec TruePower 550W PSU x 1

Western Digital Caviar 80GB Special Edition 8MB Cache - OEM x 2

Lian Li PC 71 Aluminium Full-Tower x 1

Promise Fast FastTrak100 TX2 IDE RAID card.

ThermalRight SLK-947U (Socket 478 & Socket A) Cooler

Hitachi CML174SXWB 17" TFT Monitor (Carbon)

PS, I'd previously posted this message to
alt.comp.periphs.mainboard.asus and 24hoursupport.helpdesk with no
response in either so please forgive any duplication if you've already
read it there.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Incompatible RAID controller? @drian General 1 November 9th 03 08:38 PM
help with motherboard choice S.Boardman General 30 October 20th 03 10:23 PM
help. ga-7vrxp raid trouble, compatability and warning todd elliott General 0 July 17th 03 06:50 PM
Get message "Remove disks or other media" since converting from NTFS to FAT32 Paul Hill General 1 July 6th 03 02:03 PM


All times are GMT +1. The time now is 11:21 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.