8KNXP has no USB 2.0

Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

On Fri, 18 Feb 2005 14:44:50 -0500, KatManDEW
wrote:

Well, heck with it. I got a $15 add-on USB card, and a $15 internal
memory card reader, and I'm a happy camper.

I got tired of the useless responses grom Gigabyte tech support, and
the non-existant responses from Antec and the vendor where I purchased
the system.

"KatManDEW" wrote in message
...
Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

On Fri, 18 Feb 2005 14:44:50 -0500, KatManDEW
wrote:

Well, heck with it. I got a $15 add-on USB card, and a $15 internal
memory card reader, and I'm a happy camper.

I got tired of the useless responses grom Gigabyte tech support, and
the non-existant responses from Antec and the vendor where I purchased
the system.


Have you seen this thread? It may help.

http://groups.google.co.uk/groups?q=...est.com&rnum=5


Adrian

"KatManDEW" wrote in message
...
Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

Which is what we said earlier. Maybe you want to try another case! ;-)

On Sat, 19 Feb 2005 20:58:08 -0000, "Adrian Stuart"
wrote:


"KatManDEW" wrote in message
.. .
Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

On Fri, 18 Feb 2005 14:44:50 -0500, KatManDEW
wrote:

Well, heck with it. I got a $15 add-on USB card, and a $15 internal
memory card reader, and I'm a happy camper.

I got tired of the useless responses grom Gigabyte tech support, and
the non-existant responses from Antec and the vendor where I purchased
the system.


Have you seen this thread? It may help.

http://groups.google.co.uk/groups?q=...est.com&rnum=5


Adrian

No - I hadn't seen that. I'll give that a try. It makes sense because
XP without SP1 or 2 was originally installed on this machine.

THANKS!!!

On Sun, 20 Feb 2005 01:01:19 -0000, "Ian"
wrote:


"KatManDEW" wrote in message
.. .
Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

Which is what we said earlier. Maybe you want to try another case! ;-)

Well by golly I might just yank the ports on the front of the case and
put a meter to them. It's just a few wires and connectors. The case
itself is a beauty.

Thanks.

On Sun, 20 Feb 2005 02:26:00 -0500, KatManDEW
wrote:

On Sun, 20 Feb 2005 01:01:19 -0000, "Ian"
wrote:


"KatManDEW" wrote in message
. ..
Here's a kick in the head - If I connect the internal header on the
new USB card that I got, to one of the front ports on my Antec case,
my Lexar Jumpdrive works connected there, but only in USB 1.0
mode..... The USB card is a 2.0 card and all the other ports on it
work as 2.0 ports if I connect the Jumpdrive to them. Makes me wonder
if their isn't something fishey with those front case USB connectors.

Which is what we said earlier. Maybe you want to try another case! ;-)

Well by golly I might just yank the ports on the front of the case and
put a meter to them. It's just a few wires and connectors. The case
itself is a beauty.

Thanks.
I checked continuity from the front case connectors to the connectors
that plug into the motherboard and all seems fine. I didn't yank the
front connectors from the case to inspect them.

I treid deleting all my USB devices and scanning for hardware changes
to restore them. Still no joy with the front connectors ;-(