If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
URGENT: Compatible DDR for A7N8X-Deluxe
Hello everyone,
Sorry, if I made this a little bit overimportant, but I have only a few days remaining to exchange the memory I baught. I've tried to find that list of qualified DDRam, ASUS talks about in the manual, on there web side, but with no success. I have a Rev. 2.0 board with a 3000+ AthlonXP and 2x 512Mb Kingston KHX3200K2/1G (sold as CLK2) and I 'm unable to get it to run stable. Using the SPD settings with an altered CAS latency (2,5T instead of 2T) did only result in less random crashes. (This also doesn't allow for agressive CPU settings.) I'm now running memory at 166Mhz (FSB 200MHz), which is ab- solutley inacceptable, but stable. I've also tested all possible slot combinations. If somebody please could give me the URL to the qualified DDRam list or some adwise on what memory has the least risk to be unstable. Thanx Olaf |
#2
|
|||
|
|||
http://www.asus.com/prog/spec.asp?m=...eluxe&langs=01
At the very bottom of the page "Olaf Schrader" wrote in message ... Hello everyone, Sorry, if I made this a little bit overimportant, but I have only a few days remaining to exchange the memory I baught. I've tried to find that list of qualified DDRam, ASUS talks about in the manual, on there web side, but with no success. I have a Rev. 2.0 board with a 3000+ AthlonXP and 2x 512Mb Kingston KHX3200K2/1G (sold as CLK2) and I 'm unable to get it to run stable. Using the SPD settings with an altered CAS latency (2,5T instead of 2T) did only result in less random crashes. (This also doesn't allow for agressive CPU settings.) I'm now running memory at 166Mhz (FSB 200MHz), which is ab- solutley inacceptable, but stable. I've also tested all possible slot combinations. If somebody please could give me the URL to the qualified DDRam list or some adwise on what memory has the least risk to be unstable. Thanx Olaf |
#3
|
|||
|
|||
I always use Mushkin memory in my Asus boards and have had zero problems.
"Olaf Schrader" wrote in message ... Hello everyone, Sorry, if I made this a little bit overimportant, but I have only a few days remaining to exchange the memory I baught. I've tried to find that list of qualified DDRam, ASUS talks about in the manual, on there web side, but with no success. I have a Rev. 2.0 board with a 3000+ AthlonXP and 2x 512Mb Kingston KHX3200K2/1G (sold as CLK2) and I 'm unable to get it to run stable. Using the SPD settings with an altered CAS latency (2,5T instead of 2T) did only result in less random crashes. (This also doesn't allow for agressive CPU settings.) I'm now running memory at 166Mhz (FSB 200MHz), which is ab- solutley inacceptable, but stable. I've also tested all possible slot combinations. If somebody please could give me the URL to the qualified DDRam list or some adwise on what memory has the least risk to be unstable. Thanx Olaf |
#4
|
|||
|
|||
Mine are KVR400x64c25 (2 x 256 and 1 x 512) with no problem.
Ron |
#5
|
|||
|
|||
Thank you for all replies. I think I will try Corsair because that
store has no Mushkin and they won't give me my money back. Now full of hope again (as always in such case) Olaf |
#6
|
|||
|
|||
Olaf Schrader wrote:
Thank you for all replies. I think I will try Corsair because that store has no Mushkin and they won't give me my money back. Now full of hope again (as always in such case) Olaf I have TwinX1024-3200LL and it's been great. 7-2-2-2 at 220MHz. Ben -- A7N8X FAQ: www.ben.pope.name/a7n8x_faq.html Questions by email will likely be ignored, please use the newsgroups. I'm not just a number. To many, I'm known as a String... |
#7
|
|||
|
|||
Olaf Schrader wrote:
Hello everyone, Sorry, if I made this a little bit overimportant, but I have only a few days remaining to exchange the memory I baught. I've tried to find that list of qualified DDRam, ASUS talks about in the manual, on there web side, but with no success. I have a Rev. 2.0 board with a 3000+ AthlonXP and 2x 512Mb Kingston KHX3200K2/1G (sold as CLK2) and I 'm unable to get it to run stable. Using the SPD settings with an altered CAS latency (2,5T instead of 2T) did only result in less random crashes. (This also doesn't allow for agressive CPU settings.) I'm now running memory at 166Mhz (FSB 200MHz), which is ab- solutley inacceptable, but stable. I've also tested all possible slot combinations. If somebody please could give me the URL to the qualified DDRam list or some adwise on what memory has the least risk to be unstable. Thanx Olaf Believe it or not I'm running 2 x 256 Hynix pc3200 (rated 7 3 3 2.5)in this board at 6 3 3 2 with a 2600 Barton at 180 x 11.5 Ran prime95 torture test in the background for 24hrs without a blip. I'd actually like to figger out how to get better than 2083.5Mhz, say 2167Mhz out of this setup at this stability. Gordon |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pc problems after g card upgrade + sp2 | ben reed | Homebuilt PC's | 9 | November 30th 04 01:04 AM |
Memory - compatible with Asus P4C800-E Deluxe mobo | Steve Schooler | General | 2 | May 28th 04 08:16 AM |
Memory - compatible with Asus P4C800-E Deluxe mobo | Steve Schooler | Homebuilt PC's | 2 | May 28th 04 06:03 AM |
Is ZALMAN CNPS7000A-AlCu compatible with the ASUS P4P800 Deluxe motherboard? | [email protected] | Homebuilt PC's | 4 | April 9th 04 10:19 PM |
Asus P4C800-E Deluxe "Prescott" Compatible ???? | Fantomas | Asus Motherboards | 3 | July 19th 03 07:06 PM |