If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
6800 overclock question
with good airflow what is the best overclock I can get from a 6800
non-ultra with stock cooler. this is a eVGA card, seems well made. I don't wanna fry it, just get a ballpark idea of what is possible. are the ram chips cooled by the stock cooler ie large flat green cooler with black fan at one end ? if I can get a little better performance with EQ II then I will sit tight. other components include XP 3200, 1 GB dual channel, NF7-S2G, sata drive, SB Live !, Antec tower case with 430w power supply. Computer runs cool and stable, has cooling fan blowing directly on the video card. using Rivatuner to unlock the other four pipes, no artifacts seen. core was 325 MHz, now 345. ram on card not OC yet, want the core tested first. any comments welcomed, thanks in advance. |
#2
|
|||
|
|||
6800 overclock question
farmuse wrote in news:Cn%Uf.9859$k75.6790
@newsread3.news.atl.earthlink.net: with good airflow what is the best overclock I can get from a 6800 non-ultra with stock cooler. this is a eVGA card, seems well made. I don't wanna fry it, just get a ballpark idea of what is possible. are the ram chips cooled by the stock cooler ie large flat green cooler with black fan at one end ? if I can get a little better performance with EQ II then I will sit tight. other components include XP 3200, 1 GB dual channel, NF7-S2G, sata drive, SB Live !, Antec tower case with 430w power supply. Computer runs cool and stable, has cooling fan blowing directly on the video card. using Rivatuner to unlock the other four pipes, no artifacts seen. core was 325 MHz, now 345. ram on card not OC yet, want the core tested first. any comments welcomed, thanks in advance. My Leadtek 6800le is running the core 300 (stock) in 2D and 425 in 3D with the memory (DDR) at 440 with 16 pipes and 5 shaders, stock cooler. Watch the heat, might want to replace the stock heatsink compound with something better to start. 11,500 was its best in 3DMark03. Running on NF7S-v2, Athlon 2400 mobile @ 2.5GHz. http://www.mvktech.net/ is a *great* site for tools and tips. |
#3
|
|||
|
|||
6800 overclock question
Pete wrote:
farmuse wrote in news:Cn%Uf.9859$k75.6790 @newsread3.news.atl.earthlink.net: with good airflow what is the best overclock I can get from a 6800 non-ultra with stock cooler. this is a eVGA card, seems well made. I don't wanna fry it, just get a ballpark idea of what is possible. are the ram chips cooled by the stock cooler ie large flat green cooler with black fan at one end ? if I can get a little better performance with EQ II then I will sit tight. other components include XP 3200, 1 GB dual channel, NF7-S2G, sata drive, SB Live !, Antec tower case with 430w power supply. Computer runs cool and stable, has cooling fan blowing directly on the video card. using Rivatuner to unlock the other four pipes, no artifacts seen. core was 325 MHz, now 345. ram on card not OC yet, want the core tested first. any comments welcomed, thanks in advance. My Leadtek 6800le is running the core 300 (stock) in 2D and 425 in 3D with the memory (DDR) at 440 with 16 pipes and 5 shaders, stock cooler. Watch the heat, might want to replace the stock heatsink compound with something better to start. 11,500 was its best in 3DMark03. Running on NF7S-v2, Athlon 2400 mobile @ 2.5GHz. http://www.mvktech.net/ is a *great* site for tools and tips. thanks Pete, so did you replace the thermal paste in your 6800le ? so far just raising the gpu by 27 MHz made a difference. I hope the frame rates go even higher once the ram is sped up some. Think having 128 MB ram is enough for EQ II ? of course 256 DDR3 would be great, but if 128 overclocked would do it then I will just wait and upgrade later when agp cards are even cheaper. thanks again, good link ! |
#4
|
|||
|
|||
6800 overclock question
farmuse wrote in news:qYJVf.10603$sL2.1740
@newsread2.news.atl.earthlink.net: thanks Pete, so did you replace the thermal paste in your 6800le ? so far just raising the gpu by 27 MHz made a difference. I hope the frame rates go even higher once the ram is sped up some. Think having 128 MB ram is enough for EQ II ? of course 256 DDR3 would be great, but if 128 overclocked would do it then I will just wait and upgrade later when agp cards are even cheaper. thanks again, good link ! Yes, with Arctic Silver Ceramique. It still runs hot, hotter than what it should, but without aftermarket cooling that's to be expected. The Leadtek has a nice copper heatsink but a pretty small fan, at least in the LE version. EQII? Run it and see. Push what you have. We're kind of on the trailing edge of the power curve. In 2 years it will be worthless anyway. |
#5
|
|||
|
|||
6800 overclock question-Prices for AGP
"farmuse" wrote in message link.net... Pete wrote: farmuse wrote in news:Cn%Uf.9859$k75.6790 @newsread3.news.atl.earthlink.net: with good airflow what is the best overclock I can get from a 6800 non-ultra with stock cooler. this is a eVGA card, seems well made. I don't wanna fry it, just get a ballpark idea of what is possible. are the ram chips cooled by the stock cooler ie large flat green cooler with black fan at one end ? if I can get a little better performance with EQ II then I will sit tight. other components include XP 3200, 1 GB dual channel, NF7-S2G, sata drive, SB Live !, Antec tower case with 430w power supply. Computer runs cool and stable, has cooling fan blowing directly on the video card. using Rivatuner to unlock the other four pipes, no artifacts seen. core was 325 MHz, now 345. ram on card not OC yet, want the core tested first. any comments welcomed, thanks in advance. My Leadtek 6800le is running the core 300 (stock) in 2D and 425 in 3D with the memory (DDR) at 440 with 16 pipes and 5 shaders, stock cooler. Watch the heat, might want to replace the stock heatsink compound with something better to start. 11,500 was its best in 3DMark03. Running on NF7S-v2, Athlon 2400 mobile @ 2.5GHz. http://www.mvktech.net/ is a *great* site for tools and tips. thanks Pete, so did you replace the thermal paste in your 6800le ? so far just raising the gpu by 27 MHz made a difference. I hope the frame rates go even higher once the ram is sped up some. Think having 128 MB ram is enough for EQ II ? of course 256 DDR3 would be great, but if 128 overclocked would do it then I will just wait and upgrade later when agp cards are even cheaper. Might take awhile for some of these high-end AGP cards to come down.You might even see some prices rise short term as these cards are fazed out and become harder to find.Look at the 6800gs prices are holding steady even after the release of the 7800gs.-Vic |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GeForce 6800 GT crash question.... | Steve Clemons | Nvidia Videocards | 2 | December 2nd 05 10:17 PM |
Overclock question... | Fernando Caballero | Overclocking AMD Processors | 4 | November 30th 05 01:33 AM |
overclock question | Fernando Caballero | Overclocking AMD Processors | 2 | November 26th 05 10:41 AM |
GeForce 6800 GTO Question | Mike | Dell Computers | 5 | March 4th 05 09:08 PM |
NV40 ~ GeForce 6800 specs | NV55 | Nvidia Videocards | 51 | April 20th 04 11:09 PM |