If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CPU problem ?
Hi Group, you have helped me in the past and I'm hoping you can help me
again. I am currently running an Athlon XP2000 processor on an Elitegroup KS57A mobo with 512 DDR ram and windows XP pro, but I cannot get the processor speed to run any higher than 1250Mhz, this is I can only set the CPU settings in the bios to 100/100Mhz, instead of 133/133Mhz, whenever I make these settings the computer locks just after the graphics card details are displayed on the screen (on booting up) The only way I can then unlock the PC is to clear the CMOS by moving one of the jumpers on the board. I have had the CPU running at 2000Mhz in the past CPU probbut cant get it to run now.. any ideas?? Any help appreciated Fogler |
#2
|
|||
|
|||
When I say I had it running at full capacity previously I meant it showed
2000xp on booting up but it was actually running at 1.67 Mhz sorry for the confusion Fogler "Fogler" wrote in message ... Hi Group, you have helped me in the past and I'm hoping you can help me again. I am currently running an Athlon XP2000 processor on an Elitegroup KS57A mobo with 512 DDR ram and windows XP pro, but I cannot get the processor speed to run any higher than 1250Mhz, this is I can only set the CPU settings in the bios to 100/100Mhz, instead of 133/133Mhz, whenever I make these settings the computer locks just after the graphics card details are displayed on the screen (on booting up) The only way I can then unlock the PC is to clear the CMOS by moving one of the jumpers on the board. I have had the CPU running at 2000Mhz in the past CPU probbut cant get it to run now.. any ideas?? Any help appreciated Fogler |
#3
|
|||
|
|||
I am having the same problem w/a 2400+ on an AS7333. My problem
is HEAT. I added additional case cooling and am not having any more problems. "Fogler" wrote in message ... When I say I had it running at full capacity previously I meant it showed 2000xp on booting up but it was actually running at 1.67 Mhz sorry for the confusion Fogler "Fogler" wrote in message ... Hi Group, you have helped me in the past and I'm hoping you can help me again. I am currently running an Athlon XP2000 processor on an Elitegroup KS57A mobo with 512 DDR ram and windows XP pro, but I cannot get the processor speed to run any higher than 1250Mhz, this is I can only set the CPU settings in the bios to 100/100Mhz, instead of 133/133Mhz, whenever I make these settings the computer locks just after the graphics card details are displayed on the screen (on booting up) The only way I can then unlock the PC is to clear the CMOS by moving one of the jumpers on the board. I have had the CPU running at 2000Mhz in the past CPU probbut cant get it to run now.. any ideas?? Any help appreciated Fogler |
#4
|
|||
|
|||
Fogler wrote:
When I say I had it running at full capacity previously I meant it showed 2000xp on booting up but it was actually running at 1.67 Mhz sorry for the confusion Fogler "Fogler" wrote in message ... Hi Group, you have helped me in the past and I'm hoping you can help me again. I am currently running an Athlon XP2000 processor on an Elitegroup KS57A mobo with 512 DDR ram and windows XP pro, but I cannot get the processor speed to run any higher than 1250Mhz, this is I can only set the CPU settings in the bios to 100/100Mhz, instead of 133/133Mhz, whenever I make these settings the computer locks just after the graphics card details are displayed on the screen (on booting up) The only way I can then unlock the PC is to clear the CMOS by moving one of the jumpers on the board. I have had the CPU running at 2000Mhz in the past CPU probbut cant get it to run now.. any ideas?? Any help appreciated Fogler I'm just guessing here ok? Some motherboards I've worked with won't let you go above 100MHz FSB if something is out-of-spec. Have you changed your RAM timings or something that may have caused this? -- ~misfit~ |
#5
|
|||
|
|||
I threw a 333 board with a 2400 cpu together last Christmas and was
surprised at the temp of the cpu. 53c at idle was a joke . I am a bit limited to what I can buy locally and had to settle for a Volcano9 cooler/fan but this stopped the heat problem instantly and I was able to drop the fan speed to 4000rpm to make it quiet. The stock cooler for the 2400 just doesn`t seem to be able to keep it cool enough. "AmericanPsycho" wrote in message ... I am having the same problem w/a 2400+ on an AS7333. My problem is HEAT. I added additional case cooling and am not having any more problems. "Fogler" wrote in message ... When I say I had it running at full capacity previously I meant it showed 2000xp on booting up but it was actually running at 1.67 Mhz sorry for the confusion Fogler "Fogler" wrote in message ... Hi Group, you have helped me in the past and I'm hoping you can help me again. I am currently running an Athlon XP2000 processor on an Elitegroup KS57A mobo with 512 DDR ram and windows XP pro, but I cannot get the processor speed to run any higher than 1250Mhz, this is I can only set the CPU settings in the bios to 100/100Mhz, instead of 133/133Mhz, whenever I make these settings the computer locks just after the graphics card details are displayed on the screen (on booting up) The only way I can then unlock the PC is to clear the CMOS by moving one of the jumpers on the board. I have had the CPU running at 2000Mhz in the past CPU probbut cant get it to run now.. any ideas?? Any help appreciated Fogler |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help needed with unidentified problem | ^MisterJingo^ | General | 3 | November 23rd 04 05:45 AM |
Unusual DVD-rom problem | Sizif | General | 0 | July 7th 04 03:25 PM |
This problem has baffled everyone... | Nick G | General | 46 | May 22nd 04 04:01 AM |
Problem with freezing mouse, Windows Explorer | Jon Davis | General | 3 | April 3rd 04 04:06 AM |
Freezing, lock up, unresponsive problem. | James | General | 5 | September 5th 03 02:54 PM |