A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Can't get CD Burner to Burn



 
 
Thread Tools Display Modes
  #1  
Old December 22nd 03, 08:07 AM
Nottoman
external usenet poster
 
Posts: n/a
Default Can't get CD Burner to Burn

This burner, don't know what brand really, 48x16x48, suddenly stopped
burning CDR's .
Here's the log report. Any deciphering help would be appreciated. The
process starts and then at 51% it tanks and starts spitting out errors.

Log from Nero Express 5.5.10

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created
9/10/1999 12:06:00 PM
ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 1/29/2003 9:37:36 PM
Nero Version: 5.5.10.50 (Nero Express)
Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA 0 -
5.5.10.50
Adapter driver: atapi HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA 1 -
5.5.10.50
Adapter driver: atapi HA 1
Bus Type : default (0) - ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID 0
DMA: On
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 1
DMA: On
CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 0
DMA: On
CdRomPeripheral : TEAC CD-524E atapi Port 1 ID 1
DMA: Off
: UPATC Port 2 ID 0
DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 78643200 (78643200) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 333MB (341376kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

21.12.2003
CD-ROM (ISO)
11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655
Seamless Link activated

11:18:44 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

11:18:44 PM #4 Text 0 File Writer.cpp, Line 125
Writer ATAPI CD-R/RW 48X16 running

11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744
Turn on Track-At-Once, using CD-R/RW media

11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no patch
infos
--------------------------------------------------------------

11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 18017 ( 4:02.17)

11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693
Recorder: ATAPI CD-R/RW 48X16;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B
49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)

11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176

11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 2.

11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no patch
infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8935
blocks [ATAPI CD-R/RW 48X16 ]
--------------------------------------------------------------

11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 48x (7,200 KB/s)

11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig
at #0): write at #9081

11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938
Set BUFE: Seamless Link - ON

11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333
Power calibration error

11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927
ATAPI CD-R/RW 48X16 start Close Session

11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0xFF
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0xFF

11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233
No seek complete

11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 48x (7,200 KB/s)

11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created
11/4/2001 10:38:25 PM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created
10/5/2000 1:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created
9/10/1999 12:06:00 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created
6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)

--
--
Member Business Sources - Beaverton Oregon
Ethical, Resourceful Professionals at Your Service Since 1992
www.BusinessSources.net


  #2  
Old December 22nd 03, 11:04 AM
Snoop¥ ²°°³
external usenet poster
 
Posts: n/a
Default

Hi Nottoman,

I had the same kind of problem a while ago with a Liteon burner, I found
that after cleaning the laser lens with a cleaning CD
and lowering the writing speed to 16 speed gave this writer a new lease of
life, as it was on a collision course with the bin.

Might be worth trying.?

--



Snoop¥ ²°°³

Cut ¬THE CRAP¬ To Reply.


Outgoing mail is certified Virus Free.
Checked by McAfee anti-virus system www.mcafee.com
Version: 7.03.6000 Scan Engine 4.2.60
Virus Database: 4310 - Release Date: 22/12/2003.


"Nottoman" wrote in message
...
This burner, don't know what brand really, 48x16x48, suddenly stopped
burning CDR's .
Here's the log report. Any deciphering help would be appreciated. The
process starts and then at 51% it tanks and starts spitting out errors.

Log from Nero Express 5.5.10

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created
9/10/1999 12:06:00 PM
ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 1/29/2003 9:37:36 PM
Nero Version: 5.5.10.50 (Nero Express)
Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA

0 -
5.5.10.50
Adapter driver: atapi HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA

1 -
5.5.10.50
Adapter driver: atapi HA 1
Bus Type : default (0) - ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID 0
DMA: On
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 1
DMA: On
CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 0
DMA: On
CdRomPeripheral : TEAC CD-524E atapi Port 1 ID 1
DMA: Off
: UPATC Port 2 ID 0
DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 78643200 (78643200) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 333MB (341376kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

21.12.2003
CD-ROM (ISO)
11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655
Seamless Link activated

11:18:44 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

11:18:44 PM #4 Text 0 File Writer.cpp, Line 125
Writer ATAPI CD-R/RW 48X16 running

11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744
Turn on Track-At-Once, using CD-R/RW media

11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no

patch
infos
--------------------------------------------------------------

11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 18017 ( 4:02.17)

11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693
Recorder: ATAPI CD-R/RW 48X16;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F

3B
49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid),

3:
00 00 00 (invalid)

11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176

11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 2.

11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no

patch
infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length

8935
blocks [ATAPI CD-R/RW 48X16 ]
--------------------------------------------------------------

11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 48x (7,200 KB/s)

11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos,

orig
at #0): write at #9081

11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938
Set BUFE: Seamless Link - ON

11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333
Power calibration error

11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927
ATAPI CD-R/RW 48X16 start Close Session

11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0xFF
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0xFF

11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233
No seek complete

11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 48x (7,200 KB/s)

11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created
11/4/2001 10:38:25 PM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created
10/5/2000 1:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created
9/10/1999 12:06:00 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created
6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs

:
0 (Security Option)

--
--
Member Business Sources - Beaverton Oregon
Ethical, Resourceful Professionals at Your Service Since 1992
www.BusinessSources.net




  #3  
Old December 22nd 03, 05:47 PM
Nottoman
external usenet poster
 
Posts: n/a
Default

Thanks! This problem is posted all over the web. Glad to find someone who
solved it. This is a pretty cheap CDRW so I'm sure it's going by the
wayside.
Many thanks again
Nottoman


"Snoop¥ ²°°³" wrote in message
...
Hi Nottoman,

I had the same kind of problem a while ago with a Liteon burner, I found
that after cleaning the laser lens with a cleaning CD
and lowering the writing speed to 16 speed gave this writer a new lease of
life, as it was on a collision course with the bin.

Might be worth trying.?

--



Snoop¥ ²°°³

Cut ¬THE CRAP¬ To Reply.


Outgoing mail is certified Virus Free.
Checked by McAfee anti-virus system www.mcafee.com
Version: 7.03.6000 Scan Engine 4.2.60
Virus Database: 4310 - Release Date: 22/12/2003.


"Nottoman" wrote in message
...
This burner, don't know what brand really, 48x16x48, suddenly stopped
burning CDR's .
Here's the log report. Any deciphering help would be appreciated. The
process starts and then at 51% it tanks and starts spitting out errors.

Log from Nero Express 5.5.10

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created
9/10/1999 12:06:00 PM
ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 1/29/2003 9:37:36 PM
Nero Version: 5.5.10.50 (Nero Express)
Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA

0 -
5.5.10.50
Adapter driver: atapi HA 1
Drive buffer : 2048kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA

1 -
5.5.10.50
Adapter driver: atapi HA 1
Bus Type : default (0) - ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID

0
DMA: On
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID

1
DMA: On
CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID

0
DMA: On
CdRomPeripheral : TEAC CD-524E atapi Port 1 ID

1
DMA: Off
: UPATC Port 2 ID

0
DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 78643200 (78643200) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 333MB (341376kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

21.12.2003
CD-ROM (ISO)
11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655
Seamless Link activated

11:18:44 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

11:18:44 PM #4 Text 0 File Writer.cpp, Line 125
Writer ATAPI CD-R/RW 48X16 running

11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744
Turn on Track-At-Once, using CD-R/RW media

11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no

patch
infos
--------------------------------------------------------------

11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 18017 ( 4:02.17)

11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693
Recorder: ATAPI CD-R/RW 48X16;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3:

4F
3B
49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00

(invalid),
3:
00 00 00 (invalid)

11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176

11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 2.

11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 8937 (8937) = #8937/1:59.12
relocatable, CD pos for caching/writing not required/required, no

patch
infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length

8935
blocks [ATAPI CD-R/RW 48X16 ]
--------------------------------------------------------------

11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 48x (7,200 KB/s)

11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos,

orig
at #0): write at #9081

11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938
Set BUFE: Seamless Link - ON

11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333
Power calibration error

11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927
ATAPI CD-R/RW 48X16 start Close Session

11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0xFF
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0xFF

11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233
No seek complete

11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 48x (7,200 KB/s)

11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created
11/4/2001 10:38:25 PM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created
10/5/2000 1:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created
9/10/1999 12:06:00 PM
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created
6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows

NT\CurrentVersion\WinLogon\AllocateCDROMs
:
0 (Security Option)

--
--
Member Business Sources - Beaverton Oregon
Ethical, Resourceful Professionals at Your Service Since 1992
www.BusinessSources.net






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about dvd burner Rambytes General 1 December 14th 03 12:12 AM
DVD Burner in 5 Year-old PC Buck Turgidson General 3 December 6th 03 06:58 PM
Can't burn CD in Nero with new Pioneer DVR-106D Witchsmeller Jason General 2 November 23rd 03 03:39 PM
CD & DVD burner on Primary/Secondary Master IDE channel @drian General 2 November 13th 03 09:59 AM
Slow down CD burn? jmazz General 2 August 9th 03 02:18 PM


All times are GMT +1. The time now is 06:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©2004-2022 HardwareBanter.
The comments are property of their posters.