If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help for recognising cam
On Friday, July 1, 2016 at 7:54:13 AM UTC+3, Freejazz wrote:
Hi, I bought a new (chinese) camera but I don't success to configurated it yet. This cam works with software like Iminicam or P2PLiveCam that works on Android smartphones. I linked this cam through my wifi network and inside the lan with its app is ok. But if you try to use it through another app for smartphone (Tinycam Pro ) and you set the automatic scan this camera is recognised as an Onvif with Profile S but the audio doesn't work. If you try to set as P2P camera and the app asks the UID code for 20 characters my camera has an UID of 6 characters hyphen 12 characters hyphen 6 characters and the app send me the wrong Uid message. I searched into setting and in the browser web I found some informations about cam. Here you have some clues about the camera. https://www.dropbox.com/s/uqwbcev6f5...59.44.jpg?dl=0 https://www.dropbox.com/s/scuqitcn32...58.22.jpg?dl=0 Help me!! -- 'Za Fo'! ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ I just set up such a camera. It's very tricky. A million things could go wrong. Dahua is the market leader and you should stick to them, but even they were tricky. It took a professional CCTV installer (and he was very good) three trips before he figured it out (Dahua recently changed their software and protocol). Good luck! I myself bought a cheap Chinese CCTV wireless and could not get it to work, so it's scrap now. And I've installed many CCTV systems (that did work, after you toy with them). RL |
#2
|
|||
|
|||
Help for recognising cam
Hi, I bought a new (chinese) camera but I don't success to
configurated it yet. This cam works with software like Iminicam or P2PLiveCam that works on Android smartphones. I linked this cam through my wifi network and inside the lan with its app is ok. But if you try to use it through another app for smartphone (Tinycam Pro ) and you set the automatic scan this camera is recognised as an Onvif with Profile S but the audio doesn't work. If you try to set as P2P camera and the app asks the UID code for 20 characters my camera has an UID of 6 characters hyphen 12 characters hyphen 6 characters and the app send me the wrong Uid message. I searched into setting and in the browser web I found some informations about cam. Here you have some clues about the camera. https://www.dropbox.com/s/uqwbcev6f5...59.44.jpg?dl=0 https://www.dropbox.com/s/scuqitcn32...58.22.jpg?dl=0 Help me!! -- 'Za Fo'! ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
recognising card reader! | 3107 | Storage (alternative) | 2 | March 1st 06 05:52 PM |
Old Bios not recognising New 80 gig hdd. (maxtor) | Fred-C | Homebuilt PC's | 5 | November 16th 05 01:39 PM |
Nero not recognising my DVD drive | Kwaj | General | 10 | May 21st 05 12:18 AM |
Recognising USB as a COM | Steve Hill | General | 0 | April 15th 04 12:28 PM |