If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Dual Core Compatibility
I'm looking at the 4400+ X2 and need to know if this cpu is compatible with
my MSI MS-7025 (NEO2 Platinum). MSI's site shows that, as of BIOS version 1.9 (the 2nd latest), support was added for the AMD E6 cpu. Is the dual core in the E6 family? Has anyone installed the 4400x2 in this board? Thanks, Hark |
#2
|
|||
|
|||
Dual Core Compatibility
If you go to www.amd.com, you'll find only two 4400+ models listed, both
with the E6 stepping. I've not used an nForce3 mainboard, but I ran a 4400+ on a Via K8T800pro board (Asus A8V) successfully. I've since moved it to an nForce 4 board, to switch to a PCI-E graphics card. Address scrambled. Replace nkbob with bobkn. "Harkhof" wrote in message news:KIeGf.39878$bF.2134@dukeread07... I'm looking at the 4400+ X2 and need to know if this cpu is compatible with my MSI MS-7025 (NEO2 Platinum). MSI's site shows that, as of BIOS version 1.9 (the 2nd latest), support was added for the AMD E6 cpu. Is the dual core in the E6 family? Has anyone installed the 4400x2 in this board? Thanks, Hark |
#3
|
|||
|
|||
Dual Core Compatibility
http://www.msi.com.tw/program/produc...MS-7025&kind=1
try here...this is where I checked when I ordered my K8N Neo2-F..and 3700 San Diego...I just set the parameters for the Plat. |
#4
|
|||
|
|||
Dual Core Compatibility
also...sorry to double post but...I use this forum quite regularily too...
www.amdmb.com there is a lot of stuff in there on our boards...and complaints so you may be best to check there and see. |
#5
|
|||
|
|||
Dual Core Compatibility
"dino" wrote in message news http://www.msi.com.tw/program/produc...MS-7025&kind=1 try here...this is where I checked when I ordered my K8N Neo2-F..and 3700 San Diego...I just set the parameters for the Plat. Thanks, Dino. It doesn't get any easier than that! Hark |
#6
|
|||
|
|||
Dual Core Compatibility
Thanks, Bob. I'm considering upgrading to PCI-E, as I need to buy a new
video card for a dell widescreen. Once again, I find myself experiencing the "snowball effect", where one upgrade leads to another, and another, and... Thanks again, Hark "Bob Knowlden" wrote in message . .. If you go to www.amd.com, you'll find only two 4400+ models listed, both with the E6 stepping. I've not used an nForce3 mainboard, but I ran a 4400+ on a Via K8T800pro board (Asus A8V) successfully. I've since moved it to an nForce 4 board, to switch to a PCI-E graphics card. Address scrambled. Replace nkbob with bobkn. "Harkhof" wrote in message news:KIeGf.39878$bF.2134@dukeread07... I'm looking at the 4400+ X2 and need to know if this cpu is compatible with my MSI MS-7025 (NEO2 Platinum). MSI's site shows that, as of BIOS version 1.9 (the 2nd latest), support was added for the AMD E6 cpu. Is the dual core in the E6 family? Has anyone installed the 4400x2 in this board? Thanks, Hark |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dual core hotfix | Mike | Asus Motherboards | 3 | January 25th 06 09:01 AM |
AMD upgrade to which dual core processor | www.interfacebus.com | General | 5 | August 14th 05 11:26 AM |
AMD or Intel : Dual core | Brian | Intel | 9 | July 29th 05 05:19 PM |
for those wondering about dual core bios | dead kitty | AMD x86-64 Processors | 3 | July 27th 05 06:11 PM |
"Pentium 4" brandname ready to be dropped | Yousuf Khan | Intel | 69 | November 5th 04 12:51 AM |