If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ATI OGL hotfix and the 9800Pro
Ati just released a hot fix for the Cat 3.5 drivers to solve some ogl
problems. But in the readme it supports the 9700 and below. I have a 9800 What is the deal here. My ogl is all f'ed up.Games that used to work with 3.4 |
#2
|
|||
|
|||
"NoRemorse" wrote:
"TT 1080i" wrote in message ... Ati just released a hot fix for the Cat 3.5 drivers to solve some ogl problems. But in the readme it supports the 9700 and below. I have a 9800 What is the deal here. My ogl is all f'ed up.Games that used to work with 3.4 What's the url? ATI's site doesn't seem to mention it in their drivers section. http://www.ati.com/support/infobase/4229.html -- ---------------------------------- Matti Wartiainen. Kouvola.Suomi.Finland. ----------------------------------- |
#3
|
|||
|
|||
It's listed under #2
------------- FIX #1 The information in this article applies to the following system configurations: - ATI RADEON based graphics card - CATALYST 3.5 driver suite - NeverWinter Nights game from BioWare Corp. Some users have reported that with the CATALYST 3.5 driver suite installed, objects within the game may experience severe flickering. Other OpenGL games may also be affected. ATI Engineering has been advised of this issue are is investigating. This issue should be resolved in an upcoming CATALYST release. The following uncertified drivers may work around the issue in the meantime: FIX#2 The information in this article applies to the following system configurations: - ATI RADEON 9100 based graphics card - CATALYST 3.5 driver suite - OpenGL based applications (e.g. Half Life, Quake III Arena, etc) When launching OpenGL accelerated applications, no OpenGL hardware rendering capable device will be found. For example, Half Life will report the following error message: "The Selected OpenGL mode is not supported by your video card" This issue should be resolved in an upcoming CATALYST release. The following uncertified drivers may work around the issue in the meantime: Seeing that this is a complete driver package, you dont need to have the 3.5's along with this fix. Keep in mind that this is a HOTFIX, so this is not a certified Catalyst Driver Release. ------------ "TT 1080i" wrote in message ... Ati just released a hot fix for the Cat 3.5 drivers to solve some ogl problems. But in the readme it supports the 9700 and below. I have a 9800 What is the deal here. My ogl is all f'ed up.Games that used to work with 3.4 |
#4
|
|||
|
|||
Fix 2 worked. OGL back in all of it's glory.
"TT 1080i" wrote in message ... It's listed under #2 ------------- FIX #1 The information in this article applies to the following system configurations: - ATI RADEON based graphics card - CATALYST 3.5 driver suite - NeverWinter Nights game from BioWare Corp. Some users have reported that with the CATALYST 3.5 driver suite installed, objects within the game may experience severe flickering. Other OpenGL games may also be affected. ATI Engineering has been advised of this issue are is investigating. This issue should be resolved in an upcoming CATALYST release. The following uncertified drivers may work around the issue in the meantime: FIX#2 The information in this article applies to the following system configurations: - ATI RADEON 9100 based graphics card - CATALYST 3.5 driver suite - OpenGL based applications (e.g. Half Life, Quake III Arena, etc) When launching OpenGL accelerated applications, no OpenGL hardware rendering capable device will be found. For example, Half Life will report the following error message: "The Selected OpenGL mode is not supported by your video card" This issue should be resolved in an upcoming CATALYST release. The following uncertified drivers may work around the issue in the meantime: Seeing that this is a complete driver package, you dont need to have the 3.5's along with this fix. Keep in mind that this is a HOTFIX, so this is not a certified Catalyst Driver Release. ------------ "TT 1080i" wrote in message ... Ati just released a hot fix for the Cat 3.5 drivers to solve some ogl problems. But in the readme it supports the 9700 and below. I have a 9800 What is the deal here. My ogl is all f'ed up.Games that used to work with 3.4 |
Thread Tools | |
Display Modes | |
|
|