If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
still based on the old 90nm process, and as hot as an netburst-based
Pentium D extreme. http://my.ocworkbench.com/bbs/showth...043#post419043 |
#2
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
On Aug 13, 3:18 pm, lyon_wonder wrote:
still based on the old 90nm process, and as hot as an netburst-based Pentium D extreme. http://my.ocworkbench.com/bbs/showth...043#post419043 This sounds like great chip. I wonder how fast can overclock this but maybe 90nm manufacture process will be to limiting to get very high speed? |
#3
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
How do I overclock an AMD CPU?
"Ed" wrote in message ... On Mon, 13 Aug 2007 15:43:24 -0700, Kevin Liebowicz wrote: On Aug 13, 3:18 pm, lyon_wonder wrote: still based on the old 90nm process, and as hot as an netburst-based Pentium D extreme. http://my.ocworkbench.com/bbs/showth...043#post419043 This sounds like great chip. I wonder how fast can overclock this but maybe 90nm manufacture process will be to limiting to get very high speed? It's AMDs last speed bump on 90nm so I doubt they OC much at all, if any, I'd sooner get a 6000+ and OC it to 3.2 and just be happy |
#4
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
"Ritter 197" wrote in message
. .. How do I overclock an AMD CPU? Which AMD CPU on what motherboard using what other hardware? Without details of your setup, any advice would be a WAG. |
#5
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
On Thu, 21 Feb 2008 10:23:59 -0600, "Peter van der Goes"
wrote: "Ritter 197" wrote in message ... How do I overclock an AMD CPU? Which AMD CPU on what motherboard using what other hardware? Without details of your setup, any advice would be a WAG. Huh? This is *Usenet*, ya rookie! You're supposed to *tell* him what hardware - with specificity, including bios revisions, wattages, and especially colors - and then defend your selection to your binary death, with great vigor and a broad use of "language" both domestic and foreign. Sheesh... /daytripper ;-) |
#6
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
"daytripper" wrote in message
... On Thu, 21 Feb 2008 10:23:59 -0600, "Peter van der Goes" wrote: Huh? This is *Usenet*, ya rookie! You're supposed to *tell* him what hardware - with specificity, including bios revisions, wattages, and especially colors - and then defend your selection to your binary death, with great vigor and a broad use of "language" both domestic and foreign. Sheesh... /daytripper ;-) Uh, sorry. I forgot that rule. Won't happen again... :-) |
#7
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
My computer is an AMD 2.20 gigahertz Athlon 64X2 Dual core.
The MB is an ASUSTek NODUSM3 1.05, bus Clock 199 megahertz, BIOS is Phoenix Tech LTD 3.06 07/14/2006 I am using WindowsXP. Does this help? "Peter van der Goes" wrote in message ... "Ritter 197" wrote in message . .. How do I overclock an AMD CPU? Which AMD CPU on what motherboard using what other hardware? Without details of your setup, any advice would be a WAG. |
#8
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
Ritter 197 wrote:
My computer is an AMD 2.20 gigahertz Athlon 64X2 Dual core. The MB is an ASUSTek NODUSM3 1.05, bus Clock 199 megahertz, BIOS is Phoenix Tech LTD 3.06 07/14/2006 I am using WindowsXP. Does this help? General rules - 1) If the BIOS has something set at "Auto", set it to "Manual". This will expose more settings, and make some things adjustable. I've used that approach on my last two Asus motherboards, without staring at the manual too much. 2) Find the CPU input clock. Say it was 200MHz. Set it to 205MHz. Now you're overclocking. Proceed in small steps. You don't change the input clock from 200MHz to 300MHz, and expect a miracle. Go in 5MHz steps, and boot something that won't get corrupted (memtest86+ floppy, Knoppix or Ubuntu CD). The idea is to detect instability, without crashing the thing, or causing it to lock up. 3) Turning up the CPU clock, will usually also increase the speed of the RAM, without it being obvious in the BIOS screen that it is happening. To compensate for this, turn down the visible memory clock setting. For example, say I have DDR2-800 memory. I turn it down in the BIOS, to DDR2-533. That leaves room for overclocking by a factor of 800/533=1.5x . You could increase the CPU input clock, from 200 to 300MHz, and at that point, the actual operating speed of the RAM would be exactly DDR2-800. Even though the BIOS setting shows DDR2-533. The program "CPUZ" can be used in Windows, to verify exactly what is going on. But you only boot into Windows, when the system is known to be stable. So use CPUZ with your first attempts to overclock (the 205MHz thing), and use CPUZ to verify the arithmetic behind what is happening to the clocks. CPUZ can be downloaded from cpuid.com . 4) Voltages matter. The CPU has Vcore voltage adjustment. The memory has Vdimm voltage adjustment. Only use extra voltage when necessary. Increase the CPU frequency, until memtest86+ won't boot, or your Knoppix or Ubuntu CD won't boot or crashes. Turn up Vcore in the BIOS, on the next POST. Adjust by one or two steps, keeping in mind that the processor has a stated absolute max that you should not go past. Since you're bumping the clock in 5MHz steps, now you can take a piece of graph paper, and plot frequency on one axis, and voltage on the other. The slope of the line will give you an estimate of how much voltage buys how many more MHz. This will make it easier to estimate how to hit the next overclocking targets. The plot also has a characteristic to it. For example, my processor has a "brick wall". It uses very little extra voltage, and at a certain, magic point, it won't go any faster. I can apply lots more voltage, and it won't get me anywhere. Since I can see this on my graph paper, it tells me that I've hit a limit. Other processors have a more gradual slope, and eventually you start to worry that you're cooking the thing. So you stop because the room is getting too warm :-) Adjusting RAM timing is another topic, but for not, start with some modest overclocking attempts, and master the basics. You should be able to turn the knob by 10%, without having to adjust too much stuff. HTH, Paul "Peter van der Goes" wrote in message ... "Ritter 197" wrote in message . .. How do I overclock an AMD CPU? Which AMD CPU on what motherboard using what other hardware? Without details of your setup, any advice would be a WAG. |
#9
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
On Thu, 06 Mar 2008 19:45:20 -0500, Ritter 197 wrote:
My computer is an AMD 2.20 gigahertz Athlon 64X2 Dual core. The MB is an ASUSTek NODUSM3 1.05, bus Clock 199 megahertz, BIOS is Phoenix Tech LTD 3.06 07/14/2006 I am using WindowsXP. Does this help? "Peter van der Goes" wrote in message ... "Ritter 197" wrote in message . .. How do I overclock an AMD CPU? Put in a memtest boot floppy or cdromm before making any changes. This will keep from screwing up your HDD if when you screw up. In the bios. 1. Lower base ram bus speed 1 level (33MHz real speed). 2. Lower HT bus speed 1 level (from 5x to 4x). 3. Raise vcore .1v from default. 4. Raise system bus speed from 200MHz to 233MHz. Should boot at 11x233.33MHz, about 2567MHz. Now that's a very very simple overclock. And it doesn't touch on the benefits and hazards of doing it. This small OC shouldn't cause any problems, but you never know til you start overclocking a system. If it doesn't boot, you'll probably have to clear cmos, boot and try changing some settings. It would be wise to undersatnd what these settings are and what they do before you get in over your head. There's tons of good (and bad) info on overclocking on the web. 1. Sets the base ram bus lower because raisng the system clock will also raises other clocks. 2. Same as above for the HT bus. 3. Generally more vcore for higher cpu speeds. Will vary. May not even need to raise it. .1v won't hurt it. 4. Pretty self explanatory. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org My Tivo Experience http://wesnewell.no-ip.com/tivo.htm Tivo HD/S3 compared http://wesnewell.no-ip.com/mythtivo.htm AMD cpu help http://wesnewell.no-ip.com/cpu.php |
#10
|
|||
|
|||
AMD introduces 3.2GHz Athlon 64 X2 6400+
Thanks a lot for detailed feedback. I will print it out and try to follow
your recommendations. Thanks again "Paul" wrote in message ... Ritter 197 wrote: My computer is an AMD 2.20 gigahertz Athlon 64X2 Dual core. The MB is an ASUSTek NODUSM3 1.05, bus Clock 199 megahertz, BIOS is Phoenix Tech LTD 3.06 07/14/2006 I am using WindowsXP. Does this help? General rules - 1) If the BIOS has something set at "Auto", set it to "Manual". This will expose more settings, and make some things adjustable. I've used that approach on my last two Asus motherboards, without staring at the manual too much. 2) Find the CPU input clock. Say it was 200MHz. Set it to 205MHz. Now you're overclocking. Proceed in small steps. You don't change the input clock from 200MHz to 300MHz, and expect a miracle. Go in 5MHz steps, and boot something that won't get corrupted (memtest86+ floppy, Knoppix or Ubuntu CD). The idea is to detect instability, without crashing the thing, or causing it to lock up. 3) Turning up the CPU clock, will usually also increase the speed of the RAM, without it being obvious in the BIOS screen that it is happening. To compensate for this, turn down the visible memory clock setting. For example, say I have DDR2-800 memory. I turn it down in the BIOS, to DDR2-533. That leaves room for overclocking by a factor of 800/533=1.5x . You could increase the CPU input clock, from 200 to 300MHz, and at that point, the actual operating speed of the RAM would be exactly DDR2-800. Even though the BIOS setting shows DDR2-533. The program "CPUZ" can be used in Windows, to verify exactly what is going on. But you only boot into Windows, when the system is known to be stable. So use CPUZ with your first attempts to overclock (the 205MHz thing), and use CPUZ to verify the arithmetic behind what is happening to the clocks. CPUZ can be downloaded from cpuid.com . 4) Voltages matter. The CPU has Vcore voltage adjustment. The memory has Vdimm voltage adjustment. Only use extra voltage when necessary. Increase the CPU frequency, until memtest86+ won't boot, or your Knoppix or Ubuntu CD won't boot or crashes. Turn up Vcore in the BIOS, on the next POST. Adjust by one or two steps, keeping in mind that the processor has a stated absolute max that you should not go past. Since you're bumping the clock in 5MHz steps, now you can take a piece of graph paper, and plot frequency on one axis, and voltage on the other. The slope of the line will give you an estimate of how much voltage buys how many more MHz. This will make it easier to estimate how to hit the next overclocking targets. The plot also has a characteristic to it. For example, my processor has a "brick wall". It uses very little extra voltage, and at a certain, magic point, it won't go any faster. I can apply lots more voltage, and it won't get me anywhere. Since I can see this on my graph paper, it tells me that I've hit a limit. Other processors have a more gradual slope, and eventually you start to worry that you're cooking the thing. So you stop because the room is getting too warm :-) Adjusting RAM timing is another topic, but for not, start with some modest overclocking attempts, and master the basics. You should be able to turn the knob by 10%, without having to adjust too much stuff. HTH, Paul "Peter van der Goes" wrote in message ... "Ritter 197" wrote in message . .. How do I overclock an AMD CPU? Which AMD CPU on what motherboard using what other hardware? Without details of your setup, any advice would be a WAG. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AMD introduces 3.2GHz Athlon 64 X2 6400+ | lyon_wonder | General | 35 | May 14th 08 03:27 PM |
AMD Newbie need help to overclock Athlon X2 4400+ to 4800+ (from 2.2ghz to 2.4ghz) | Jean | Asus Motherboards | 1 | August 23rd 05 07:04 AM |
AMD Athlon 64 3200+ vs Pentium 4 3.2ghz | Simon Lee | General | 16 | September 17th 04 04:18 AM |
WinBook introduces 64-bit Athlon system | The little lost angel | General | 0 | December 6th 03 08:57 AM |
1.2GHz Athlon or 1.3GHz Duron? | John Carlyle-Clarke | General | 2 | October 10th 03 11:48 PM |