A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Macron or WinTech 300watt ATX PSU?



 
 
Thread Tools Display Modes
  #1  
Old August 6th 03, 09:30 AM
Franklin
external usenet poster
 
Posts: n/a
Default Macron or WinTech 300watt ATX PSU?

I have a choice between a Macron or Wintech 300 watt ATX power supply.

Does anyone have any comments on either of these supplies? I don't find much
seaching with Google.

Thanks!


  #2  
Old August 6th 03, 01:24 PM
kony
external usenet poster
 
Posts: n/a
Default

On Wed, 06 Aug 2003 08:30:09 GMT, "Franklin"
wrote:

I have a choice between a Macron or Wintech 300 watt ATX power supply.

Does anyone have any comments on either of these supplies? I don't find much
seaching with Google.

Thanks!



They're both low-end generics.. if these are the only options from a
professional builder, I'd question what ELSE they're selling to you.

See if you can get a discount without the power supply and buy your
own or have one delivered to them if they won't give you any other
alternatives at reasonable prices, say a name-brand like Sparkle or
Antec =350W for $30 more. If you tell them you simply don't want
either power supply and they won't accomodate you, take your business
elsewhere... you're probably not even saving much if any money with
these generics, it's just more profit for them and could be a headache
for you later on.


Dave

  #3  
Old August 6th 03, 01:56 PM
Franklin
external usenet poster
 
Posts: n/a
Default

This is a PSU to replace one that is currently failing...

The ratings on the Macron are almost twice as good as the current PSU.

I'm not wanting to spend more than $50 CDN on a PSU, so these are the two
that I have available.

"kony" wrote in message
...
On Wed, 06 Aug 2003 08:30:09 GMT, "Franklin"
wrote:

I have a choice between a Macron or Wintech 300 watt ATX power supply.

Does anyone have any comments on either of these supplies? I don't find

much
seaching with Google.

Thanks!



They're both low-end generics.. if these are the only options from a
professional builder, I'd question what ELSE they're selling to you.

See if you can get a discount without the power supply and buy your
own or have one delivered to them if they won't give you any other
alternatives at reasonable prices, say a name-brand like Sparkle or
Antec =350W for $30 more. If you tell them you simply don't want
either power supply and they won't accomodate you, take your business
elsewhere... you're probably not even saving much if any money with
these generics, it's just more profit for them and could be a headache
for you later on.


Dave



  #4  
Old August 6th 03, 08:45 PM
kony
external usenet poster
 
Posts: n/a
Default

On Wed, 06 Aug 2003 12:56:30 GMT, "Franklin"
wrote:

This is a PSU to replace one that is currently failing...

The ratings on the Macron are almost twice as good as the current PSU.

I'm not wanting to spend more than $50 CDN on a PSU, so these are the two
that I have available.


I don't deal with these two generic "labels", though it's quite
possible I've seen the same power supplies with a different generic
label on them. The funny thing about them is that when systems
started needing more power, say around the time of the ~1GHz Athlon
systems' debut, suddenly many generic power supplies starting wearing
labels claiming greater capacity with NO HIGHER true output. It's
possible these power supplies have higher true capacity than your
current power supply, but on the other hand almost all the 400W
generics I"ve seen have lesser true capacity than a name-brand 250W
model. Name-brand is your assurance of a minimal level of quality and
capacity, far moreso than the numbers on the label, which can only be
relied upon from the better manufacturers, otherwise only between
different models and series from the same manufacturer.

For $50 CDN, which I roughly translate into $35 USD, you're cutting
the power supply budget pretty tightly. There's a certain minimum
price for a power supply that doesn't skip any important features, $35
is a challenging price-point to shop for. Not knowing the going
rates where you're located it's hard to suggest a make/model with such
a small price-window, but I'd look for a 300W Sparkle or Fortron
(essentially the same power supply, different label). Those models
typically have one of the best quality per dollar ratios without any
unnecessary frills adding to the cost. You don't mention the system
so I can only assume it's high enough capacity, since you did mention
the previous power supply being rated only half as well as those
generics.


Dave
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:03 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.