A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)



 
 
Thread Tools Display Modes
  #1  
Old November 13th 05, 10:52 AM
Perriot-Lebarq
external usenet poster
 
Posts: n/a
Default Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)

Bonjour,
Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en
slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un
voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un
adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient
de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper). J'ai
monté le tout sur ma carte mère Asus p3b-f ver 1.04 sans modifier les
cavaliers de configuration. (ils sont tous règlés en position "par défaut"
et "jumper free").J'ai mis à jour le BIOS avec la dernière version
Mon problème :
Mon PC ne boote plus ! Pas de bip, ecran noir. Pas de démarrage du bios.

NB : qd je remets l'ancien processeur à 550 Mhz, le micro redémarre comme il
faut ... mais à 550 Mhz.
Merci par avance pour votre contribution.


  #2  
Old November 13th 05, 11:55 AM
Stephan Grossklass
external usenet poster
 
Posts: n/a
Default Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)

Perriot-Lebarq schrieb:

Bonjour,
Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en
slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un
voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un
adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca vient
de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper).


That could be an old PPGA-only adapter for Mendocino Celerons only - and
that wouldn't work with your processor, thus your problem. An adapter
compatible with Coppermines would have to have at least a "Celeron -
Coppermine" jumper, and even then not all of them would be suited:
http://support.intel.com/support/pro.../CS-007585.htm
You'll probably need another slot adapter suitable for Coppermines.
(Tualatin adapters tend to support Coppermines as well, at least the
Slot-T does.)

Stephan
--
Home: http://stephan.win31.de/
PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W
  #3  
Old November 13th 05, 12:16 PM
Daniel Mandic
external usenet poster
 
Posts: n/a
Default Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)

Perriot-Lebarq wrote:

Bonjour,
Je souhaite faire évoluer mon processeur (actuellement un P3 à 550
Mhz en slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de
133 mhz et un voltage core à 1,75V en socket 370. J'ai donc acheté
d'occasion un adaptateur socket 370 pour slot one. Pour info, si
vious pensez que ca vient de là, il s'agit d'un adaptateur "tout
automatique" (pas de jumper). J'ai monté le tout sur ma carte mère
Asus p3b-f ver 1.04 sans modifier les cavaliers de configuration.
(ils sont tous règlés en position "par défaut" et "jumper free").J'ai
mis à jour le BIOS avec la dernière version Mon problème : Mon PC ne
boote plus ! Pas de bip, ecran noir. Pas de démarrage du bios.

NB : qd je remets l'ancien processeur à 550 Mhz, le micro redémarre
comme il faut ... mais à 550 Mhz. Merci par avance pour votre
contribution.



Hi Perriot!



I have a similar problem. In my Case I would probably need a BIOS
Update. Because the Board (P2B 1.02 with a P2/350 - throwout of a BANK)
is outfitted with an older BIOS, of course. After a BIOS Update the
Cu800EB/133 should work fine, also with 133MHz FSB.
All my older P2 CPU´s are sold or built in :-(.... I ought to take my
P2Xeon/300 out of the P3B-F and install it in the P2B for making a BIOS
Update, to get this 800EB workin, making a nice gamestation with an
Océd GeForce DDR 256 (89MHz AGP).... I hope the P2B is stable at
133MHz. Chances are bad.

Otherwise, it could be that my P2B is plain broken and no BIOS Update
would help.


But you could try a smaller Pentium (350, 400, 550) just to see if your
Motherboard is working. Start with 100MHz FSB... don´t forget to set
the AGP Jumper to 2:3. Or 1:1 with FSB66.




Au Revior,

Daniel Mandic
  #4  
Old November 13th 05, 09:20 PM
Perriot-Lebarq
external usenet poster
 
Posts: n/a
Default Pentium3 socket 370 sur Asus P3BF avec adaptateur (slot one-socket 370)

Thank your for your contribution
Manu
"Stephan Grossklass" a écrit dans le message
de news: ...
Perriot-Lebarq schrieb:

Bonjour,
Je souhaite faire évoluer mon processeur (actuellement un P3 à 550 Mhz en
slot one ) par un P3 à 1 Ghz type coppermine avec un FSB de 133 mhz et un
voltage core à 1,75V en socket 370. J'ai donc acheté d'occasion un
adaptateur socket 370 pour slot one. Pour info, si vious pensez que ca
vient
de là, il s'agit d'un adaptateur "tout automatique" (pas de jumper).


That could be an old PPGA-only adapter for Mendocino Celerons only - and
that wouldn't work with your processor, thus your problem. An adapter
compatible with Coppermines would have to have at least a "Celeron -
Coppermine" jumper, and even then not all of them would be suited:
http://support.intel.com/support/pro.../CS-007585.htm
You'll probably need another slot adapter suitable for Coppermines.
(Tualatin adapters tend to support Coppermines as well, at least the
Slot-T does.)

Stephan
--
Home: http://stephan.win31.de/
PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommend Good Asus Socket 939 Mobo 40 PC SOCKET SET Homebuilt PC's 7 February 10th 05 07:57 AM
ASUS K8V Deluxe - Motherboard Andre General 2 October 13th 04 01:46 AM
Asus A8V & Socket 939 mv Asus Motherboards 0 June 4th 04 05:39 AM
ASUS P4P800 SE does not power down, at leats not for my outlet with a15W master socket Fam. Schuurman Asus Motherboards 4 May 17th 04 03:03 AM
Difference between a 'socket 370' CPU vs a 'slot 1' CPU? theresa Homebuilt PC's 4 September 20th 03 12:16 PM


All times are GMT +1. The time now is 05:49 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.