If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
MB Monitoring Utilities?
My Asus board came with a little util that tells CPU temp, MB
temp, and a number of other things. Is there something on my EP45-DS3L install disc that I missed? -- PeteCresswell |
#2
|
|||
|
|||
MB Monitoring Utilities?
(PeteCresswell) wrote:
My Asus board came with a little util that tells CPU temp, MB temp, and a number of other things. Is there something on my EP45-DS3L install disc that I missed? The Gigabtye program that does that is called EasyTune. You can DL from the website too. |
#3
|
|||
|
|||
MB Monitoring Utilities?
Per jt:
Is there something on my EP45-DS3L install disc that I missed? The Gigabtye program that does that is called EasyTune. You can DL from the website too. Thanks. Found it by Googling "Gigabyte EasyTune Download". I hope my new motherboard is going to work better done than GigaByte's web site... -) -- PeteCresswell |
#4
|
|||
|
|||
MB Monitoring Utilities?
Per (PeteCresswell):
Found it by Googling "Gigabyte EasyTune Download". Anybody know how it is presented? I've clicked "Setup.exe" a few times and there's about .75 seconds of "Install Wiz"... but it just flashes past. After that, I can't seem to find it anywhere. Should it be a choice somewhere on the Start menu? -- PeteCresswell |
#5
|
|||
|
|||
MB Monitoring Utilities?
(PeteCresswell) wrote:
Per (PeteCresswell): Found it by Googling "Gigabyte EasyTune Download". Anybody know how it is presented? I've clicked "Setup.exe" a few times and there's about .75 seconds of "Install Wiz"... but it just flashes past. After that, I can't seem to find it anywhere. Should it be a choice somewhere on the Start menu? Did you download from the Utilities link here ? EasyTune6. Released Oct29/08. http://www.gigabyte.com.tw/Support/M...ProductID=2844 Utilities like that, need to access hardware. The method used, might be an ACPI object (with info passed by the BIOS to the OS at boot time). A second way, is for a driver to be installed when the utility is installed. If that doesn't work, you could try installing as administrator. For example, in my Device Manager hidden devices, one of the Asus programs left behind an "Asushwio" driver, which could be how something like Asus Probe gets to the hardware. Paul |
#6
|
|||
|
|||
MB Monitoring Utilities?
"(PeteCresswell)" wrote in message ... Per (PeteCresswell): Found it by Googling "Gigabyte EasyTune Download". Anybody know how it is presented? I've clicked "Setup.exe" a few times and there's about .75 seconds of "Install Wiz"... but it just flashes past. After that, I can't seem to find it anywhere. Should it be a choice somewhere on the Start menu? -- PeteCresswell Pete, You should have the easytune 6 icon in your taskbar. Alternate click on it and select "show" Note that the instructions for changing fan speed is a little incorrect as it appears that there is a slider missing but it does work if you change the left hand slider. regards, Beemer |
#7
|
|||
|
|||
MB Monitoring Utilities?
Per Paul:
Did you download from the Utilities link here ? EasyTune6. Released Oct29/08. http://www.gigabyte.com.tw/Support/M...ProductID=2844 Apparently not. Must've been from another page on the site, bc I wound up with something named "motherboard_utility_ultra_tpm.exe" instead of the "motherboard_utility_gbttools_gbt_et6.exe" which is downloading right now from the link above. Thanks for the corrected link. -- PeteCresswell |
#8
|
|||
|
|||
MB Monitoring Utilities?
Per Beemer:
You should have the easytune 6 icon in your taskbar. Alternate click on it and select "show" Note that the instructions for changing fan speed is a little incorrect I've got it now - thanks to the corrected download link. Whenever the machine is booted, it starts giving off what I'd interpret as an alarm signal. None of the numbers are at of above the warning limits - but it keeps on making the noise until I manage to close it down. Any thoughts? -- PeteCresswell |
#9
|
|||
|
|||
MB Monitoring Utilities?
Sometimes if you use the fan speed alarm, it can sound for quite a few
seconds until the CPU gets hot enough and the fan spins up. "(PeteCresswell)" wrote in message news Per Beemer: You should have the easytune 6 icon in your taskbar. Alternate click on it and select "show" Note that the instructions for changing fan speed is a little incorrect I've got it now - thanks to the corrected download link. Whenever the machine is booted, it starts giving off what I'd interpret as an alarm signal. None of the numbers are at of above the warning limits - but it keeps on making the noise until I manage to close it down. Any thoughts? -- PeteCresswell |
#10
|
|||
|
|||
MB Monitoring Utilities?
"(PeteCresswell)" wrote in message news Per Beemer: You should have the easytune 6 icon in your taskbar. Alternate click on it and select "show" Note that the instructions for changing fan speed is a little incorrect I've got it now - thanks to the corrected download link. Whenever the machine is booted, it starts giving off what I'd interpret as an alarm signal. None of the numbers are at of above the warning limits - but it keeps on making the noise until I manage to close it down. Any thoughts? -- PeteCresswell Pete, My guess is that Easytune is trying to monitor one or more fans that are not actually installed as happened to me. Touching each fan's center with your finger will show which fan is which as you watch the Easytune fan page. Then you can lower the slider of the missing fan's so that it changes from red to blue. Of course you must have the fan control activated in the bios. My fans are only 3 pin so I had to set "voltage" as the fan control bios option. You can then select the advanced fan control in Easytune. If you cannot stop the noise you can always switch the sound off in Easytune. Beemer |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Norton Utilities | Freddie | Packard Bell Computers | 0 | October 26th 04 03:33 PM |
Nero Utilities | RobF | Cdr | 0 | November 24th 03 08:17 PM |
utilities | Ripa | Asus Motherboards | 1 | November 17th 03 05:19 PM |
TV out utilities | Janne | Nvidia Videocards | 9 | November 14th 03 01:23 AM |