If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Gigabyte DS3P S3 standby issue
Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. |
#2
|
|||
|
|||
Gigabyte DS3P S3 standby issue
"alfhenrik" schreef in bericht ... Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. Hi, Have new system, assembled by Alternate, with Gigabyte P35C-DS3R Mainboard. Same story! I have to change S3 to S1 in bios. Then standby mode workes normal. On S3, computer goes directly to sleep-mode. Greetings, Morgen. |
#3
|
|||
|
|||
Gigabyte DS3P S3 standby issue
"alfhenrik" wrote in message ... Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. This kind of problem seems common and it appears not to be related to Gigabyte. Seems common in Vista. Are you running Vista? |
#4
|
|||
|
|||
Gigabyte DS3P S3 standby issue
"Mellowed" schreef in bericht news:%Uxki.7230$MV6.4443@trnddc01... "alfhenrik" wrote in message ... Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. This kind of problem seems common and it appears not to be related to Gigabyte. Seems common in Vista. Are you running Vista? Hi, No, will wait another year with Vista. Still running XP-home, but had a look in bios of my 5-1/2 year old computer also with XP-home, but with Chaintech CT-6AJA4 mainboard and also there the bios setting in power- management is on S1. Did not yet try it on S3 (sorry). Greetings, Morgen. |
#5
|
|||
|
|||
Gigabyte DS3P S3 standby issue
On Jul 8, 5:58 pm, alfhenrik
wrote: Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. Hi, I have the same exact problem, it used to work but it stoped. I even went back to F4, but the NIC is still not recognized when using S3. Ami |
#6
|
|||
|
|||
Gigabyte DS3P S3 standby issue
wrote in message oups.com... On Jul 8, 5:58 pm, alfhenrik wrote: Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. Hi, I have the same exact problem, it used to work but it stoped. I even went back to F4, but the NIC is still not recognized when using S3. Ami Use a PCI slot NIC, works for me. |
#7
|
|||
|
|||
Gigabyte DS3P S3 standby issue
Have you tried the latest BIOS?
Mine has never had this problem. Are you using ACPI or APM. You should use one or the other, not both. I am using the onboard LAN as well as a PCI NIC. "Bob H" wrote in message . .. wrote in message oups.com... On Jul 8, 5:58 pm, alfhenrik wrote: Hi, When I put my computer in standby mode (S3) it powers down as it should, but when I then wake it up again, the onboard NIC does not wake up and I have to reboot my computer to get network connectivity again. Any one else had this issue? My system is as follows: Gigabyte DS3P (Rev. 3.3, F5 BIOS) Intel E6400 @ 8x400 3.2Ghz 2Gb Corsair 6400C4 4x250Gb Western Digitals (2 in RAID0 and 2 in RAID1) 2xPowercolor X1950Pro Extreme Pioneer SATA DVD Burner Thanks. Hi, I have the same exact problem, it used to work but it stoped. I even went back to F4, but the NIC is still not recognized when using S3. Ami Use a PCI slot NIC, works for me. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weird Monitor issue when coming out of Standby | [email protected] | Dell Computers | 2 | June 27th 07 06:42 AM |
Putting computers in standby issue | Hawkeye | Asus Motherboards | 6 | May 17th 06 01:16 PM |
Putting Computers in standby issue | Hawkeye | Homebuilt PC's | 4 | May 17th 06 09:10 AM |
Waking from standby issue | old jon | Ati Videocards | 7 | January 14th 06 03:29 PM |
Asus A8V standby issue | WhoKnows | Asus Motherboards | 3 | February 3rd 05 12:09 AM |