If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Tue, 06 May 2008 01:49:09 -0700, Andy wrote:
:Is this the MDP-130? The predecessor, the MYHD MDP-120. It's the same, I think, except it doesn't decode QAM, which I think means I can't use it with cable (which I don't have presently, anyway). It uses the same application for recording, timeshifting, etc. I use it with rooftop antennas. It supports two antenna connections, although I broke one. Will see if I can fix it. Anyway, I've only been using one of the antennas even before the other connection broke (which was my fault). : : I also use firewire occasionally, so onboard firewire or :at least an open PCI slot for my firewire card would be nice. I fax :occasionally, using a PCI modem, so that takes a slot. Not having a :firewire connection on the front of my case, I rely on one on the back :somehow. : :Another socket 754 AGP board would be easiest for me because I could use :my CPU and video card and DDR PC3200. Do you have any idea of the : :GIGABYTE GA-K8NS PRO : :That's socket 754, etc. Do you think it might also have ACPI issues? :It's an nforce3 250, so maybe those issues were worked out by then. : :I've never used this board, so I have no idea. There's no way of :knowing for sure without actually trying it. : :There is one motherboard with five PCI slots that is currently in roduction, and that is the GA-P35-S3G. Thanks. BTW, in my testing yesterday, when trying to restore from S3 and hibernation, I believe I was getting the same results. With hibernation a normal boot to post occurred and then Windows tried to restore and then the whole system lapsed into the same thing I saw with the S3 restore attempt: Power LED: On, steady HD LED: On, steady Numlock light on keyboard: On (I never use numlock, and have it set to off in BIOS) Power button: No response unless I held it for 4+ seconds, which results in shutdown Reset button: Resets machine I have had 2-3 different scenarios. Twice the Windows desktop appeared, but the system locked up. No response when trying to move the cursor with the mouse, no response to keyboard. I'm wondering what Gigabyte support would say about my ACPI problems with the GA-K8N Pro. If they can suggest a workaround or would send me a different socket 754 mobo on RMA. I bought the board new-in-box recently. Before receiving the board I called them and asked about warranty policy and they said I'd have to contact them later with more information. Dan |
#22
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
I got a great tip at techsupportforums.com to try a free tool called MSC
Standby Tool: http://slicksolutions.eu/mst.shtml It was originally for MSC but works for several OS's and can do a lot to resolve the evidently very prevalent problems encountered with reduced power states. It can be run as an exe or installed from the exe's GUI, for expanded control. I haven't installed it yet, but ran it and went into S3 Standby and successfully woke the system up after 49 minutes, which I think is a record. I don't feel so bad now that I realize that the problems I've been having are commonplace and that there are things I can do to resolve the difficulties. This tool looks terrific. |
#23
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Tue, 06 May 2008 14:44:31 -0700, Dan Musicant )
wrote: :I got a great tip at techsupportforums.com to try a free tool called MSC :Standby Tool: : :http://slicksolutions.eu/mst.shtml : :It was originally for MSC but works for several OS's and can do a lot to :resolve the evidently very prevalent problems encountered with reduced ower states. : :It can be run as an exe or installed from the exe's GUI, for expanded :control. I haven't installed it yet, but ran it and went into S3 Standby :and successfully woke the system up after 49 minutes, which I think is a :record. I don't feel so bad now that I realize that the problems I've :been having are commonplace and that there are things I can do to :resolve the difficulties. This tool looks terrific. Correction, that tool, called MST was originally for MCE. The GUI has a whole lot to do with MCE but its capabilities extend much beyond it. The last couple of S3 restarts I have done have succeeded! 2 hours and 5 hours! |
#24
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Tue, 06 May 2008 06:59:08 -0700, Dan Musicant )
wrote: On Tue, 06 May 2008 01:49:09 -0700, Andy wrote: :Is this the MDP-130? The predecessor, the MYHD MDP-120. It's the same, I think, except it doesn't decode QAM, which I think means I can't use it with cable (which I don't have presently, anyway). It uses the same application for recording, timeshifting, etc. I use it with rooftop antennas. It supports two antenna connections, although I broke one. Will see if I can fix it. Anyway, I've only been using one of the antennas even before the other connection broke (which was my fault). Do you use the MDP-120 under Windows XP? It works fine under Windows 2000, but when I tried it with Windows XP, I found that when the driver Mdp100_XP.sys is loaded in memory, Windows XP crashes when coming out of standby or hibernation. : : I also use firewire occasionally, so onboard firewire or :at least an open PCI slot for my firewire card would be nice. I fax :occasionally, using a PCI modem, so that takes a slot. Not having a :firewire connection on the front of my case, I rely on one on the back :somehow. : :Another socket 754 AGP board would be easiest for me because I could use :my CPU and video card and DDR PC3200. Do you have any idea of the : :GIGABYTE GA-K8NS PRO : :That's socket 754, etc. Do you think it might also have ACPI issues? :It's an nforce3 250, so maybe those issues were worked out by then. : :I've never used this board, so I have no idea. There's no way of :knowing for sure without actually trying it. : :There is one motherboard with five PCI slots that is currently in roduction, and that is the GA-P35-S3G. Thanks. BTW, in my testing yesterday, when trying to restore from S3 and hibernation, I believe I was getting the same results. With hibernation a normal boot to post occurred and then Windows tried to restore and then the whole system lapsed into the same thing I saw with the S3 restore attempt: Power LED: On, steady HD LED: On, steady Numlock light on keyboard: On (I never use numlock, and have it set to off in BIOS) Power button: No response unless I held it for 4+ seconds, which results in shutdown Reset button: Resets machine I have had 2-3 different scenarios. Twice the Windows desktop appeared, but the system locked up. No response when trying to move the cursor with the mouse, no response to keyboard. I'm wondering what Gigabyte support would say about my ACPI problems with the GA-K8N Pro. If they can suggest a workaround or would send me a different socket 754 mobo on RMA. I bought the board new-in-box recently. Before receiving the board I called them and asked about warranty policy and they said I'd have to contact them later with more information. Dan ** Posted from http://www.teranews.com ** |
#25
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Tue, 06 May 2008 14:44:31 -0700, Dan Musicant )
wrote: I got a great tip at techsupportforums.com to try a free tool called MSC Standby Tool: http://slicksolutions.eu/mst.shtml It was originally for MSC but works for several OS's and can do a lot to resolve the evidently very prevalent problems encountered with reduced power states. It can be run as an exe or installed from the exe's GUI, for expanded control. I haven't installed it yet, but ran it and went into S3 Standby and successfully woke the system up after 49 minutes, which I think is a record. I don't feel so bad now that I realize that the problems I've been having are commonplace and that there are things I can do to resolve the difficulties. This tool looks terrific. I tried it, I'm not sure what it's supposed to do, but I did not see any difference in the behavior of my K8N Pro. ** Posted from http://www.teranews.com ** |
#26
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Thu, 08 May 2008 15:04:34 -0700, Andy wrote:
:On Tue, 06 May 2008 01:49:09 -0700, Andy wrote: : ::Is this the MDP-130? : :The predecessor, the MYHD MDP-120. It's the same, I think, except it :doesn't decode QAM, which I think means I can't use it with cable (which :I don't have presently, anyway). It uses the same application for :recording, timeshifting, etc. I use it with rooftop antennas. It :supports two antenna connections, although I broke one. Will see if I :can fix it. Anyway, I've only been using one of the antennas even before :the other connection broke (which was my fault). : o you use the MDP-120 under Windows XP? It works fine under Windows :2000, but when I tried it with Windows XP, I found that when the :driver Mdp100_XP.sys is loaded in memory, Windows XP crashes when :coming out of standby or hibernation. Yes, under XP. I used to use it under Win2000, also successfully. However, I wasn't using S3 or hibernation then. Is that driver loaded in memory even after closing the MyHD application? How can you tell it's loaded in memory? I have MyHD open right now, live TV. Under Processes in Task Manager I see MyHD.exe and MyIRC.exe. How would I know if Mdp100_XP.sys is loaded? If I close MyHD, will it still be loaded? I haven't so far tried doing S3 or hibernation with MyHD open, don't know why I'd want to. Now, obviously something is active even when MyHD isn't open because scheduled recordings proceed. I figured it might be a service. Do you know? I don't see it in services. If I close MyHD, it disappears from Processes, but MyIRC.exe remains, which doesn't surprise me becaue its icon is always there in the tray. Anyway, I'm no longer getting crashes when coming out of S3. Haven't tried hibernation, but will. I had a problem I discovered yesterday being loss of audio through my Hercules GTXP PCI soundcard/breakout box, which is connected by SPDIF to my AV receiver. It would happen every time I came out of S3. Sometimes I still had audio through headphones out of the breakout box, sometimes not. I did some hunting today and found a more recent driver for the card, one that is said to address some XP issues and make the card usable with Vista. After some problems getting the driver to work, I got it installed OK, recognized in Device Manager, and configured and I no longer have sound loss, at least the last couple of times out of S3. It looks like I may have worked through the problem for the most part. I think the most important factor was the installation of the MST utility I linked in this thread yesterday. |
#27
|
|||
|
|||
Hibernate and suspend simply not supported on GA-K8N Pro?
On Thu, 08 May 2008 15:11:38 -0700, in
alt.comp.periphs.mainboard.gigabyte you wrote: :On Tue, 06 May 2008 14:44:31 -0700, Dan Musicant ) :wrote: : :I got a great tip at techsupportforums.com to try a free tool called MSC :Standby Tool: : :http://slicksolutions.eu/mst.shtml : :It was originally for MSC but works for several OS's and can do a lot to :resolve the evidently very prevalent problems encountered with reduced :power states. : :It can be run as an exe or installed from the exe's GUI, for expanded :control. I haven't installed it yet, but ran it and went into S3 Standby :and successfully woke the system up after 49 minutes, which I think is a :record. I don't feel so bad now that I realize that the problems I've :been having are commonplace and that there are things I can do to :resolve the difficulties. This tool looks terrific. : :I tried it, I'm not sure what it's supposed to do, but I did not see :any difference in the behavior of my K8N Pro. :** Posted from http://www.teranews.com ** Try installing the all-in-one driver package for nforce3 (36 MB) from nvidia.com, nForce_5.11_winxp2k_international_whql.exe You can get it he http://www.nvidia.com/object/nforce3_winxp_5.11.html |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new install broke suspend/hibernate - help! | Dr. Joel M. Hoffman | Dell Computers | 17 | March 16th 07 09:50 AM |
A8N-SLI Deluxe -- Unable to resume from Standby, Suspend, or Hibernate | MikeBomb | Asus Motherboards | 0 | September 5th 05 10:25 AM |
hibernate and suspend with ati aiw | Douglas | Ati Videocards | 2 | November 10th 04 10:48 PM |
XP Pro hangs on hibernate or suspend with GA-7N400 Pro2 (Rev 2.0) | Outlook User | Gigabyte Motherboards | 12 | May 23rd 04 05:55 PM |
Suspend and hibernate no longer available on Inspiron 8600 running XP Home | News | Dell Computers | 7 | February 2nd 04 04:54 PM |