A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Ati Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cant play DVD's with any player s/w



 
 
Thread Tools Display Modes
  #1  
Old October 26th 03, 07:52 PM
Steve
external usenet poster
 
Posts: n/a
Default Cant play DVD's with any player s/w

Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc. I do
have MMC 8.1 and know the DVD player won't work since it was upgraded from
MMC 7.7 but for life of me can't figure out why no other player will work
now. Was pretty happy for longest time.
Have latest Directx9upgrade from MS.

Not a drive problem, two different drives and both have same problem
I can play MPEG2 movied off hard drive.

Have 8500DV, P4 1.8, 512K, and about 40gb of free HD.

Any suggestions appreciated.
TIA
--
Steve


  #2  
Old October 26th 03, 08:01 PM
Steve
external usenet poster
 
Posts: n/a
Default

Forgot to mention, W-XP update 1 and all MS critical updates, including the
optional Directx update which didn't help.
Steve

--
Steve
"Steve" wrote in message
ink.net...
Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc. I

do
have MMC 8.1 and know the DVD player won't work since it was upgraded from
MMC 7.7 but for life of me can't figure out why no other player will work
now. Was pretty happy for longest time.
Have latest Directx9upgrade from MS.

Not a drive problem, two different drives and both have same problem
I can play MPEG2 movied off hard drive.

Have 8500DV, P4 1.8, 512K, and about 40gb of free HD.

Any suggestions appreciated.
TIA
--
Steve




  #3  
Old October 26th 03, 08:51 PM
Mark H
external usenet poster
 
Posts: n/a
Default

Well, mmc8.1 is now up to version 8.7 and you also have to have windows
media encoder and dao 8.1.0.0 loaded before mmc8.7

Steve wrote:
Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc. I do
have MMC 8.1 and know the DVD player won't work since it was upgraded from
MMC 7.7 but for life of me can't figure out why no other player will work
now. Was pretty happy for longest time.
Have latest Directx9upgrade from MS.

Not a drive problem, two different drives and both have same problem
I can play MPEG2 movied off hard drive.

Have 8500DV, P4 1.8, 512K, and about 40gb of free HD.

Any suggestions appreciated.
TIA



--
Mark H --- Frag on !
NF7-S v2.0 Win2k-sp4
WinXp-sp1a

  #4  
Old October 26th 03, 10:18 PM
Steve
external usenet poster
 
Posts: n/a
Default

I was trying to avoid continually updating MMC cuz everytime something else
broke.
All was OK for months with MMC 8.1 and other video players.

Didnt think MMC would be an issue when other players are used expecially
since I haven't added any video drivers in months. But will have to bit the
bullet and try going to MMC 8.7 if all else fails. Just a gut feel it's not
the MMC since I only use for capture, not playback.

--
Steve
"Mark H" wrote in message
...
Well, mmc8.1 is now up to version 8.7 and you also have to have windows
media encoder and dao 8.1.0.0 loaded before mmc8.7

Steve wrote:
Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc.

I do
have MMC 8.1 and know the DVD player won't work since it was upgraded

from
MMC 7.7 but for life of me can't figure out why no other player will

work
now. Was pretty happy for longest time.
Have latest Directx9upgrade from MS.

Not a drive problem, two different drives and both have same problem
I can play MPEG2 movied off hard drive.

Have 8500DV, P4 1.8, 512K, and about 40gb of free HD.

Any suggestions appreciated.
TIA



--
Mark H --- Frag on !
NF7-S v2.0 Win2k-sp4
WinXp-sp1a



  #5  
Old October 27th 03, 04:52 PM
Massimo Rosen
external usenet poster
 
Posts: n/a
Default

Hi,

Steve wrote:

Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc.



Neither Windows Media Player nor the Interactual stuff (if it's the one
that came from a normal DVD, not the one you have to buy) are DVD
players. They're just different frontends to your default DVD player in
your system. So, which is your default full featured DVD player?

CU,
Massimo
  #6  
Old October 28th 03, 01:07 AM
Steve
external usenet poster
 
Posts: n/a
Default

Upgraded to Catalyst 3.8 and MMC 8.7 and no difference.
Removed all ATI s/w and put my old Nvida TNT 64 display card back in.

Everything works perfectly! Even WMP, Interactual, Intervideo play DVD's
perfectly now.

Will reinstall 8500DV again, put in orig s/w and see what happens. If
problem returns, then
looks like the 8500DV card itself is the culprit. Still under warranty,
going back to ATI.



--
Steve
"Massimo Rosen" wrote in message
...
Hi,

Steve wrote:

Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc.



Neither Windows Media Player nor the Interactual stuff (if it's the one
that came from a normal DVD, not the one you have to buy) are DVD
players. They're just different frontends to your default DVD player in
your system. So, which is your default full featured DVD player?

CU,
Massimo



  #7  
Old October 28th 03, 01:18 PM
Skid
external usenet poster
 
Posts: n/a
Default

Make sure you scrub all traces of the Nvidia drivers and software from the
system before you put the ATI card back in. (Uninstall all the ATI stuff,
too, before you put it back on, and get rid of those Interact and Intervid
toy players.) Conflicts with all those unneeded files may well have caused
your problems in the first place.

P.S., Once you have it set up right, you'll see there is no comparison.
Image quality, gameplay and DVD playback are all MUCH better on a Radeon
8500 than a TNT 64. I made the same switch and never looked back.

"Steve" wrote in message
ink.net...
Upgraded to Catalyst 3.8 and MMC 8.7 and no difference.
Removed all ATI s/w and put my old Nvida TNT 64 display card back in.

Everything works perfectly! Even WMP, Interactual, Intervideo play DVD's
perfectly now.

Will reinstall 8500DV again, put in orig s/w and see what happens. If
problem returns, then
looks like the 8500DV card itself is the culprit. Still under warranty,
going back to ATI.



--
Steve
"Massimo Rosen" wrote in message
...
Hi,

Steve wrote:

Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds. Doesn't
matter if its Windows Media Player, Interactual, Intervideo playeretc.



Neither Windows Media Player nor the Interactual stuff (if it's the one
that came from a normal DVD, not the one you have to buy) are DVD
players. They're just different frontends to your default DVD player in
your system. So, which is your default full featured DVD player?

CU,
Massimo





  #8  
Old October 29th 03, 02:01 AM
Steve
external usenet poster
 
Posts: n/a
Default

Found the root cause....Catalyst drivers.
With original 2.1 all is well.
With either 3.2 or 3.8, have the DVD crash/hard reboot problem.

Can duplicate problem with or without MMC 7.7 or MMC 8.1 even installed.

Go figure.

--
Steve
"Skid" wrote in message
news:A0unb.38030$ao4.82262@attbi_s51...
Make sure you scrub all traces of the Nvidia drivers and software from the
system before you put the ATI card back in. (Uninstall all the ATI stuff,
too, before you put it back on, and get rid of those Interact and Intervid
toy players.) Conflicts with all those unneeded files may well have caused
your problems in the first place.

P.S., Once you have it set up right, you'll see there is no comparison.
Image quality, gameplay and DVD playback are all MUCH better on a Radeon
8500 than a TNT 64. I made the same switch and never looked back.

"Steve" wrote in message
ink.net...
Upgraded to Catalyst 3.8 and MMC 8.7 and no difference.
Removed all ATI s/w and put my old Nvida TNT 64 display card back in.

Everything works perfectly! Even WMP, Interactual, Intervideo play DVD's
perfectly now.

Will reinstall 8500DV again, put in orig s/w and see what happens. If
problem returns, then
looks like the 8500DV card itself is the culprit. Still under

warranty,
going back to ATI.



--
Steve
"Massimo Rosen" wrote in message
...
Hi,

Steve wrote:

Noticed I can't play any DVDs. Commercial or home made.
PC does hard reboot right after DVD's play, within 3 seconds.

Doesn't
matter if its Windows Media Player, Interactual, Intervideo

playeretc.


Neither Windows Media Player nor the Interactual stuff (if it's the

one
that came from a normal DVD, not the one you have to buy) are DVD
players. They're just different frontends to your default DVD player

in
your system. So, which is your default full featured DVD player?

CU,
Massimo







 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.avi on cd - will it play in dvd player Martin ©¿©¬ @mandeREMOVETHIS.plus.com Cdr 2 October 20th 04 02:10 PM
What am I doing wroing? DVD-R Sean Winterberg Cdr 5 June 8th 04 05:28 AM
DVD player won't play last 2 to 3 minutes of some DVD's Steve Homebuilt PC's 1 June 1st 04 10:23 AM
Audio won't play for DVDs on VT7 jaze Abit Motherboards 0 May 13th 04 01:34 AM
Can I play MPEG2 files on topset DVDs? CarlosWA Ati Videocards 2 July 16th 03 08:28 AM


All times are GMT +1. The time now is 11:55 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.