If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
A7M-266D Dual
Not looked at the AMD CPU options on this board for a while now.
Not really got a clue about the differences either. Can anyoone advise me on which CPU's this board will actually support. Ta. |
#2
|
|||
|
|||
"Me" wrote in message ... Not looked at the AMD CPU options on this board for a while now. Not really got a clue about the differences either. Can anyoone advise me on which CPU's this board will actually support. Ta. http://www.asus.com.tw/support/cpusu...pusupport.aspx Just select SocketA and the board model. HTH |
#3
|
|||
|
|||
Me wrote: Can anyoone advise me on which CPU's this board will actually support. Running two XP1800+'s right now. |
#4
|
|||
|
|||
Tommi Koivula wrote:
Me wrote: Can anyoone advise me on which CPU's this board will actually support. Running two XP1800+'s right now. I've used two of those boards. The first one I did with a pair of Durons and later upgraded to XP 1800+'s. The second one I did with a pair of 1600+'s. Both were recently upgraded to MP2200+'s. I've also done the same thing with a couple of Tyan boards. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. |
#5
|
|||
|
|||
Looks good then.
I may well go for 2 x 2400 XP's. "Rob Stow" wrote in message ... Tommi Koivula wrote: Me wrote: Can anyoone advise me on which CPU's this board will actually support. Running two XP1800+'s right now. I've used two of those boards. The first one I did with a pair of Durons and later upgraded to XP 1800+'s. The second one I did with a pair of 1600+'s. Both were recently upgraded to MP2200+'s. I've also done the same thing with a couple of Tyan boards. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. |
#6
|
|||
|
|||
Me wrote:
Looks good then. I may well go for 2 x 2400 XP's. Before you do, you need to be aware that once upon a time the XP's didn't have anything stopping you from using them in pairs, but now they do. The transition point was the XP1900+ - lower speeds are not locked, higher speeds are, and those that are right on the 1900+ line might or might not be. There are articles out there that tell how you can unlock newer XP's so that you can use them in pairs. The first place I would look would be 2cpu.com - and as always tools like Google are helpful. "Rob Stow" wrote in message ... Tommi Koivula wrote: Me wrote: Can anyoone advise me on which CPU's this board will actually support. Running two XP1800+'s right now. I've used two of those boards. The first one I did with a pair of Durons and later upgraded to XP 1800+'s. The second one I did with a pair of 1600+'s. Both were recently upgraded to MP2200+'s. I've also done the same thing with a couple of Tyan boards. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. |
#7
|
|||
|
|||
Just what I wanted to hear, thanks Rob.
"Rob Stow" wrote in message ... Me wrote: Looks good then. I may well go for 2 x 2400 XP's. Before you do, you need to be aware that once upon a time the XP's didn't have anything stopping you from using them in pairs, but now they do. The transition point was the XP1900+ - lower speeds are not locked, higher speeds are, and those that are right on the 1900+ line might or might not be. There are articles out there that tell how you can unlock newer XP's so that you can use them in pairs. The first place I would look would be 2cpu.com - and as always tools like Google are helpful. "Rob Stow" wrote in message ... Tommi Koivula wrote: Me wrote: Can anyoone advise me on which CPU's this board will actually support. Running two XP1800+'s right now. I've used two of those boards. The first one I did with a pair of Durons and later upgraded to XP 1800+'s. The second one I did with a pair of 1600+'s. Both were recently upgraded to MP2200+'s. I've also done the same thing with a couple of Tyan boards. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. -- Reply to newsgroup only please. This e-mail account is real but effectively abandoned because of excessive spamming. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dual CPU set-up/ | john_D | General | 6 | January 16th 05 01:28 AM |
Dual CPU systems - still worth it? | Mr. Grinch | Overclocking AMD Processors | 9 | May 2nd 04 09:02 AM |
Mushkin PC3200 1Gb Dual Packs from Fry's | DW | General | 3 | September 24th 03 10:37 AM |
Mushkin PC3200 1Gb Dual Packs from Fry's | DW | Overclocking | 3 | September 24th 03 10:37 AM |
Mushkin PC3200 1Gb Dual Packs from Fry's | DW | Homebuilt PC's | 7 | September 24th 03 10:37 AM |