Are Kingston HyperX crap?

I have been reading negative reports on Kingston HyperX KHX3200K2 CAS
2-2-2-6-1 in comp.sys.intel newsgroup.

I don't intend to overclock this (Intel 875PBZ board) but do want to use the
above memory timings.

Anybody here have experience with these modules?
--

Aloke
---
to reply by e-mail remove 123 and change invalid to com

Aloke Prasad wrote:
I have been reading negative reports on Kingston HyperX KHX3200K2 CAS
2-2-2-6-1 in comp.sys.intel newsgroup.

I don't intend to overclock this (Intel 875PBZ board) but do want to use the
above memory timings.

Anybody here have experience with these modules?

http://www.ocaddiction.com/reviews/m...ngston_hyperx/

It's good that you don't intend to overclock, because you most likely can't
overclock or use agressive memory timings with an Intel motherboard.

Phil Weldon,

"Aloke Prasad" wrote in message
...
I have been reading negative reports on Kingston HyperX KHX3200K2 CAS
2-2-2-6-1 in comp.sys.intel newsgroup.

I don't intend to overclock this (Intel 875PBZ board) but do want to use
the
above memory timings.

Anybody here have experience with these modules?
--

Aloke
---
to reply by e-mail remove 123 and change invalid to com

I knew that going in. This board won't overclock but it will let you set
the individual memory timing parameters.

So, anyone here likes the HyperX product?
--

Aloke
---
to reply by e-mail remove 123 and change invalid to com

"Phil Weldon" wrote in message
hlink.net...
It's good that you don't intend to overclock, because you most likely
can't
overclock or use agressive memory timings with an Intel motherboard.

Phil Weldon,

"Aloke Prasad" wrote in message
...
I have been reading negative reports on Kingston HyperX KHX3200K2 CAS
2-2-2-6-1 in comp.sys.intel newsgroup.

I don't intend to overclock this (Intel 875PBZ board) but do want to use
the
above memory timings.