A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

HELP 8IK1100 Wont Boot



 
 
Thread Tools Display Modes
  #1  
Old January 2nd 04, 01:02 PM
Rich
external usenet poster
 
Posts: n/a
Default HELP 8IK1100 Wont Boot

Help!

I recently tried to upgrade my Mobo to an 8IK1100. When I try to
start uo the system, after it passes POST I get a screen full of:
"01 01 01 01 01"s covering the whole screen. No error messages.

Does anyone know what is happening here?

TIA for any help anyone can offer.
  #2  
Old January 2nd 04, 03:58 PM
Testadura
external usenet poster
 
Posts: n/a
Default

I recently tried to upgrade my Mobo to an 8IK1100. When I try to
start uo the system, after it passes POST I get a screen full of:
"01 01 01 01 01"s covering the whole screen. No error messages.

Does anyone know what is happening here?

TIA for any help anyone can offer.


Seems to boot if you have the display and the Post, if it didn't boot
you shoukd have nothing.
You only have a probleme with your hard disc drive.
There's something called APIC on the Bios setup,
if you have it active you should partition again your HDD.

  #3  
Old January 4th 04, 01:03 AM
Geoffrey H. Goldberg
external usenet poster
 
Posts: n/a
Default

Gigabyte just came out with a new BIOS (F9) for the GA-8IK1100. There were
problems that many experienced with the F8 (although the F7 seemed stable).
Anyhow, if you are using the F8 BIOS save yousrself some grief and get the
F9 BIOS.

Geoffrey H. Goldberg,
Pittsburgh

"Rich" wrote in message
s.com...
Help!

I recently tried to upgrade my Mobo to an 8IK1100. When I try to
start uo the system, after it passes POST I get a screen full of:
"01 01 01 01 01"s covering the whole screen. No error messages.

Does anyone know what is happening here?

TIA for any help anyone can offer.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
a7n8x boot problem upon restart Arnaud Lesauvage Asus Motherboards 9 February 4th 05 09:22 PM
GA-8IHXP: f8 boot conflict w/ Promise Raid0 and adaptec 29160 scsi card ~Von Gigabyte Motherboards 1 November 26th 03 04:12 AM
8IK1100 - Bios settings to boot from SATA drive + 2 IDE ATA drives? RJGraham Gigabyte Motherboards 5 November 10th 03 12:20 AM
GA-8KNXP, how to configure BIOS for SATA? John Ward Gigabyte Motherboards 20 October 6th 03 07:42 AM
Dual Boot, How? Paul \(Erie\) General 1 June 24th 03 04:36 PM


All times are GMT +1. The time now is 09:43 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.