If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
*help* new monitor does not like my radeon card
just got a new 20 in lcd monitor.
its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#2
|
|||
|
|||
*help* new monitor does not like my radeon card
try this
http://www.microsoft.com/typography/...ner/Step1.aspx most LCD monitors run best at their native resolution.If your Vid Card cannot handle that resolution its time to get a new vid card or return the LCD for one whose resolution matches the output of the vid card. peter -- "Those are my principles. If you don't like them I have others." "*muffin*" wrote in message ... just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#3
|
|||
|
|||
*help* new monitor does not like my radeon card
*muffin* wrote:
just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. Try the latest drivers for Win9x. In my opinion, all Win9x are crap. I've never looked back after I stepped up to first 2k, then XP. You can easily navigate here through www.ati.com . I found them here; https://support.ati.com/ics/support/...ge&folderID=27 If this doesnt work, try powerstrip. http://www.pcworld.com/downloads/fil...scription.html Good luck! -- Grtz, Thomas. |
#4
|
|||
|
|||
*help* new monitor does not like my radeon card
I'd look for monitor drivers. Since the AIW 9xxx and newer all support
higher resolutions than 1280x1024, it must be windows telling the card that the monitor can't go any higher. Also, it's been a while since I've used 98 but I think there's a check box in the display properties that says something like "hide unsupported modes". Uncheck that and your resolution should be available. Scott "*muffin*" wrote in message ... just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#5
|
|||
|
|||
*help* new monitor does not like my radeon card
shoot I guess I forgot to mention I have the AIW radeon 8500.
uhhhh should upgrading to the 9xxx's fix this? "Scott Paist" spivonious_at_comcast_dot_net wrote in message . .. I'd look for monitor drivers. Since the AIW 9xxx and newer all support higher resolutions than 1280x1024, it must be windows telling the card that the monitor can't go any higher. Also, it's been a while since I've used 98 but I think there's a check box in the display properties that says something like "hide unsupported modes". Uncheck that and your resolution should be available. Scott "*muffin*" wrote in message ... just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#6
|
|||
|
|||
*help* new monitor does not like my radeon card
I only found it for XP.
I have win98se "peter" wrote in message news:B0OLg.512727$Mn5.57959@pd7tw3no... try this http://www.microsoft.com/typography/...ner/Step1.aspx most LCD monitors run best at their native resolution.If your Vid Card cannot handle that resolution its time to get a new vid card or return the LCD for one whose resolution matches the output of the vid card. peter -- "Those are my principles. If you don't like them I have others." "*muffin*" wrote in message ... just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#7
|
|||
|
|||
*help* new monitor does not like my radeon card
no disk with display.
when I first installed it, it seemed to go "OK" windows found driver for it, but I am not sure 'if' I did something playing around with the ati settings, since when I reboot the computer tells me it found an unknown device, & wants to install it, but I can't figure out what to look for, since it doesn't seem to find drivers on its own. arrghhhhh. so I cancel. (but it didn't look anydifferent than when I 1st installed it.) "The Kat" wrote in message ... On Thu, 7 Sep 2006 00:34:17 -0400, "*muffin*" wrote: just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? Run the driver disk that should have come with the display. Lumber Cartel (tinlc) #2063. Spam this account at your own risk. This sig censored by the Office of Home and Land Insecurity... Remove XYZ to email me |
#8
|
|||
|
|||
*help* new monitor does not like my radeon card
I understand that win95 for some is crap... but I really like it. plus I
have games I still want to play that will only use win95/98 system ( I did not think there was a fix to the newer OS to handle these..... if I am mistaken, please point me in that direction) ok, I have searched the ATI site for drivers, it looks like the NEWEST ones for win98 is from 2005, I am pretty sure I have the newest updates from their site when I installed my card last year. uh,, ok, how can I be sure, I know there is a way to tell what drivers, (looking through the tabs of my ati properties I can't seem to find it) "Thomas" wrote in message ... *muffin* wrote: just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. Try the latest drivers for Win9x. In my opinion, all Win9x are crap. I've never looked back after I stepped up to first 2k, then XP. You can easily navigate here through www.ati.com . I found them here; https://support.ati.com/ics/support/...k=knowledge&fo lderID=27 If this doesnt work, try powerstrip. http://www.pcworld.com/downloads/fil...c,alldownloads /description.html Good luck! -- Grtz, Thomas. |
#9
|
|||
|
|||
*help* new monitor does not like my radeon card
Which AIW Radeon? Which interface (analog VGA or DVI)?
"the text is just not 'sharp' , like its ghosted" There are two possible explanations; it's possible that both are in play. First, if you are using an analog interface (VGA analog 15-pin connector), MOST of the monitor cables cause analog ghosting because they are not of adequate quality (this will be much worse if you use an extension cable). Second, ANY TIME that you run at a resolution other than the native resolution of the LCD panel, the dispaly has to be scaled, and this ALWAYS degrades quality and sharpness. For many reasons, you may be forced to move to Windows XP and also to upgrade your video card. I still run 98SE also, on this system (it's dual boot), but XP is a dramatically better OS than 98SE and it's really past time to move to XP for your mainstream applications. [Of course it goes without saying that XP itself is going to be replaced by Vista next year]. I don't have a solution for you on the resolution issue, and you may need to replace the video card to support that resolution. Also, if the monitor has DVI, you should use (move to, if necessary) a DVI interface. *muffin* wrote: just got a new 20 in lcd monitor. its native resolution is 1400 x 1050 I have the all-in-wonder radeon wonder card and it only has resolution up to 1280 x 1024 suggestions on what to do? right now I am running 1024 x 768m this size seems best for me. I am running windows 98SE( yes I LOVE this version, my games are very happy running on this version) anyway, the text is just not 'sharp' , like its ghosted. I have searched ATI site, and other places bu tcannot find a fix to this, or driver. what am I missing? do I need a new video card? , but then what about the 98SE thing, I don't see more updaed drivers than I have. |
#10
|
|||
|
|||
*help* new monitor does not like my radeon card
*muffin* wrote:
shoot I guess I forgot to mention I have the AIW radeon 8500. uhhhh should upgrading to the 9xxx's fix this? No... 8500 is equal to at least 9200 and 9000. If you dont need more 3D speed, upgrading is useless. The 8500 series usessame driver versions as the latest ATI cards. Like I suggested, if the latest ATI driver doesn't fix it, try Powerstrip. You can make a 'custom resolution' with that utility. -- Grtz, Thomas |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ati radeon x700 graphics card , i'm unsure of the version that i have....or is there only one version? | Just Wondering | Ati Videocards | 1 | March 20th 06 11:21 PM |
New video card now agp_warn. | nytestalker79 | Asus Motherboards | 1 | February 22nd 06 03:24 AM |
FS printers/parts trays, printheads -- oki fujitsu dl3700 dl3800 hp genicom epson ibm dec jetdirect laserjet lexmark qms okidata microline 320 ml320 393 tally printronix tektronix qms toshiba zebra otc ibm intermec 7755 boul st laurent montreal ca | cisco | Printers | 2 | May 22nd 05 02:05 AM |
Peak Radeon x800 Pro Graphics Card & Dell 8250 | Bob Huntley | Ati Videocards | 7 | September 7th 04 09:31 PM |
Matrox RT.X100 and ATI Radeon 9800 conflict? No POST screen on boot. | FilmPuppet | Matrox Videocards | 0 | May 11th 04 11:34 PM |