If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
MMC 9.0 "upgrade"
Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after
uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#2
|
|||
|
|||
I went through the 8.9 uninstall and 9.0 install and everything worked as
normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#3
|
|||
|
|||
No problems either...used same procedure as Aloke.
"Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#4
|
|||
|
|||
Obviously, after using CAT-uninstaller, you'll have to re-install all ATI
software, including drivers, DVD decoder, WDM driver, Guide+, everything. It will give you a clean slate to start with. -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#5
|
|||
|
|||
Why is a step like this necessary? Normally uninstalls and/or upgrades take
care of all this for you? alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#6
|
|||
|
|||
the day that an ' upgrade ' goes the way ' we ' want it to , is the
day hell freezes over. "Alan Olson" wrote in message ... Why is a step like this necessary? Normally uninstalls and/or upgrades take care of all this for you? alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#7
|
|||
|
|||
In my case, the usual uninstall-install of newer versions has worked for the
last 12 months. The CAT-uninstaller must do a better job of removing ATI software. That's why ATI wrote it (I assume). -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Why is a step like this necessary? Normally uninstalls and/or upgrades take care of all this for you? alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#8
|
|||
|
|||
OK,
I uninstalled 8.8. I ran the catuninstaller. i rebooted. I reinstalled the WDM. I rebooted. XP found all the "new" hardware. I launched the 9.0 install. same thing happened. it extracted the files, it initialized the installer. The installer disappeared AGAIN without any error. alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#9
|
|||
|
|||
Find the folder ATI\support\ and the mmc folder there. Try running
setup.exe to see if it will install that way. Do you have more than one WDM installed? If so, uninstall that and reinstall the ATI WDM. Reboot and cancel any "new hardware found" installation and do it manually. "Alan Olson" wrote in message ... OK, I uninstalled 8.8. I ran the catuninstaller. i rebooted. I reinstalled the WDM. I rebooted. XP found all the "new" hardware. I launched the 9.0 install. same thing happened. it extracted the files, it initialized the installer. The installer disappeared AGAIN without any error. alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
#10
|
|||
|
|||
Running it from that directory does the same exact thing.
From the control panel/Administrative/Device manager - there is only one WDM installed. How do i uninstall the WDM? alan "diener" wrote in message ... Find the folder ATI\support\ and the mmc folder there. Try running setup.exe to see if it will install that way. Do you have more than one WDM installed? If so, uninstall that and reinstall the ATI WDM. Reboot and cancel any "new hardware found" installation and do it manually. "Alan Olson" wrote in message ... OK, I uninstalled 8.8. I ran the catuninstaller. i rebooted. I reinstalled the WDM. I rebooted. XP found all the "new" hardware. I launched the 9.0 install. same thing happened. it extracted the files, it initialized the installer. The installer disappeared AGAIN without any error. alan "Aloke Prasad" wrote in message news I went through the 8.9 uninstall and 9.0 install and everything worked as normal. Try using the Catuninstaller on http://www.ati.com/support/drivers/m...lystutils.html to completely remove all ATI software and then install MMC9.0 -- Aloke ---- to reply by e-mail remove 123 and change invalid to com "Alan Olson" wrote in message ... Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after uninstalling 8.x? If so, i'd love to hear from you. neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8. The setup program will load/initialize and then simply disappear on me without any error. Help. Alan |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upgrade cpu or videocard? | Monster | Homebuilt PC's | 4 | September 23rd 04 11:33 AM |
Need advice on box upgrade | ur_droll | Overclocking AMD Processors | 17 | June 11th 04 06:50 AM |
Upgrade Report [Hardware Tips: Get the Right Hard Drive - 05/11/2004] | Ablang | General | 0 | May 16th 04 03:17 AM |
CD Writer hangs after failed firmware upgrade | Lokke | Cdr | 17 | November 17th 03 10:26 PM |
Nero 6 - Upgrade confusion.... | zero | Cdr | 1 | July 28th 03 06:31 PM |