A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

P4P800VM issue with Fedora Core 2 Linux



 
 
Thread Tools Display Modes
  #1  
Old August 21st 04, 07:45 AM
RCman
external usenet poster
 
Posts: n/a
Default P4P800VM issue with Fedora Core 2 Linux

I have a Colomachine CM54 SATA based 1U Server. Here is the hardware
specification:

http://www.colomachine.com/cm-54.htm

Motherboard: Integrated ASUS P4P800VM micro-atx
Processor: Intel® Pentium 4® 3.06GHz Processor (Hype-thread Enabled)
Chipset: Intel® 82865G GMCH / Intel® 82801DB ICH5
System Memory: 2 x 184 pins DDR266 DIMM sockets with a maximum of 4GB
installed memory. (1GB DDR333 Installed)
IDE/EIDE Interface
Network Support: Intel 82562EZ LAN PHY 10/100Mbps Fast Ethernet Port
(RJ45)
BIOS:Award BIOS
Video Support:Integrated 865G Chipset with onboard video. AGP 8X
Hard Disk Drive: 2 x (Samsung or Seagate) 120GB SATA HD
CD-ROM Drive: BTC 52X CDROM Reader (IDE)
Power Supply:ATX 250 watts power supply (Dual 110V/220V Auto-switch)

I am trying to load Fedora Core 2 on the machine and it will boot then
whether I select graphical or text mode to perform the install; it
starts to load then stalls when it gets to

/sbin/loader

It just sits there. a CR does nothing. what's wrong? what do I do?
Is it a hardware problem or O.S. related issue?

Thanks!
  #2  
Old August 21st 04, 03:44 PM
NBK
external usenet poster
 
Posts: n/a
Default

RCman wrote:
I have a Colomachine CM54 SATA based 1U Server. Here is the hardware
specification:

http://www.colomachine.com/cm-54.htm

Motherboard: Integrated ASUS P4P800VM micro-atx
Processor: Intel® Pentium 4® 3.06GHz Processor (Hype-thread Enabled)
Chipset: Intel® 82865G GMCH / Intel® 82801DB ICH5
System Memory: 2 x 184 pins DDR266 DIMM sockets with a maximum of 4GB
installed memory. (1GB DDR333 Installed)
IDE/EIDE Interface
Network Support: Intel 82562EZ LAN PHY 10/100Mbps Fast Ethernet Port
(RJ45)
BIOS:Award BIOS
Video Support:Integrated 865G Chipset with onboard video. AGP 8X
Hard Disk Drive: 2 x (Samsung or Seagate) 120GB SATA HD
CD-ROM Drive: BTC 52X CDROM Reader (IDE)
Power Supply:ATX 250 watts power supply (Dual 110V/220V Auto-switch)

I am trying to load Fedora Core 2 on the machine and it will boot then
whether I select graphical or text mode to perform the install; it
starts to load then stalls when it gets to

/sbin/loader

It just sits there. a CR does nothing. what's wrong? what do I do?
Is it a hardware problem or O.S. related issue?

Thanks!

I had the same problem with my P4P800 Deluxe until i
checked out http://www.fedorafaq.org/ for a fixed iso...
HTH
NBK
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sound in linux? ASUS P5AD2, Fedora Core III Benjamin Johnson Homebuilt PC's 6 February 7th 05 09:23 PM
AMD SEMPRON CPU patrick Homebuilt PC's 0 July 29th 04 12:59 PM
Best drive configuration? Noozer General 20 May 27th 04 03:10 AM
Fedora Core 2 install dies NBK Asus Motherboards 6 May 24th 04 03:07 AM
Lindows? OS's in general... Brandon Homebuilt PC's 6 February 14th 04 08:23 PM


All times are GMT +1. The time now is 01:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©2004-2022 HardwareBanter.
The comments are property of their posters.