If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Unlocked OEM XP2500+ from Newegg
I received an unlocked OEM XP2500+ ordered from
Newegg on Thursday, Nov 12, 2003 AQXEA0327-- Perhaps not the greatest, but my other one is exactly the same and does 2200 / 200 at 1.6v., but not 2300 unless I crank the voltage to 1.8, and then it gets very hot (Silent Boost with a faster fan that doesn't vibrate like the piece of crap that came with it). |
#2
|
|||
|
|||
Fishface wrote:
AQXEA0327-- Perhaps not the greatest, but my other one is exactly the same and does 2200 / 200 at 1.6v., but not 2300 unless I crank the voltage to 1.8, and then it gets very hot. The new one seems to be an identical twin of the first. No better, no worse. Still, a good deal for $85. |
#3
|
|||
|
|||
Fishface wrote:
The new one seems to be an identical twin of the first. No better, no worse. Still, a good deal for $85. It seems to run OK at 11 x 211 (2330), a bit warm at 56 C. I have the vcore on the NF7-S set to 1.775 v., but according to Winbond Hardware Doctor (and the bios health screen), it undervolts a bit, so measured voltage is 1.73 to 1.74. Room temp is 21 C, but case temp is 39 C running Prime95. I can see that ducting of some cooler air would definitely help the temps. I was thinking of a big, slow fan pulling cool air from a hole in the bottom of the case, but was afraid the airflow wouldn't be smooth and it would make a racket. Maybe a hood scoop would look nice on the side... http://www.musclecarcalendar.com/hemi_jack_7.htm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shipping and defective stuff from Newegg - if you have high shipping costs this could be a nightmare | [email protected] | General | 6 | June 20th 04 09:47 PM |
XP2500 Barton Overclock Failure | Simon Bale | Overclocking | 15 | March 27th 04 08:53 PM |
Any body know which Barton XP2500 NEWEGG is Selling Locked or Unlocked ? | Mickey | Overclocking AMD Processors | 23 | December 12th 03 01:30 PM |
fan for overclocked XP2500? | Larry Gagnon | Overclocking AMD Processors | 1 | November 2nd 03 01:20 PM |
Spanking new Cpu | netreaper | Overclocking | 2 | June 24th 03 01:39 PM |