|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
December 2nd 08, 11:26 PM
posted to alt.sys.pc-clone.compaq.servers
|
|||
|
|||
Installing bigger HDs in Storage works 4214R
Hey guys,
I have an old Storageworks U3 Drive Enclosure 4214R and this is my current configuration: 1 RAID 5 Array with 8 x 36 GB SCSI (15K RPM) I wonder if I can use bigger disks of 72 , 144 GB or even bigger on that unit? I have not found any manual, thanks, Gaston. 
|
|
#2
December 3rd 08, 03:35 AM
posted to alt.sys.pc-clone.compaq.servers
|
|||
|
|||
|
Installing bigger HDs in Storage works 4214R
"Gaston Perez" wrote in message ... Hey guys, I have an old Storageworks U3 Drive Enclosure 4214R and this is my current configuration: 1 RAID 5 Array with 8 x 36 GB SCSI (15K RPM) I wonder if I can use bigger disks of 72 , 144 GB or even bigger on that unit? I have not found any manual, thanks, Gaston. Gaston, They will work fine, I have the 4314's (scsi3) with 72 gig drives we have been using for some time. The 4214R is scsi2 not 3, unless the controller module (module where the cables plug in) has been upgraded. Phil
|
|
#3
December 3rd 08, 05:18 PM
posted to alt.sys.pc-clone.compaq.servers
|
|||
|
|||
|
Installing bigger HDs in Storage works 4214R
Thanks Phil, your help is very appreciated. I will quote some new hard
drives for the unit. Have you (or anyone else) upgraded the controller module? do you know the part number? Thanks Gaston. "Phil" wrote in message ... "Gaston Perez" wrote in message ... Hey guys, I have an old Storageworks U3 Drive Enclosure 4214R and this is my current configuration: 1 RAID 5 Array with 8 x 36 GB SCSI (15K RPM) I wonder if I can use bigger disks of 72 , 144 GB or even bigger on that unit? I have not found any manual, thanks, Gaston. Gaston, They will work fine, I have the 4314's (scsi3) with 72 gig drives we have been using for some time. The 4214R is scsi2 not 3, unless the controller module (module where the cables plug in) has been upgraded. Phil
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help Re-Installing MS Works | Zo | Packard Bell Computers | 6 | March 1st 08 01:26 AM |
| Any Way to Autostart Drives in 4214R? | Will | Compaq Computers | 5 | June 1st 05 12:37 AM |
| Any Way to Autostart Drives in 4214R? | Will | Compaq Servers | 5 | June 1st 05 12:37 AM |
| Drives Not Autostarting in a 4214R | CHANGE USERNAME TO westes | Compaq Servers | 25 | June 3rd 04 05:14 AM |
| Compaq Storage Works 4354R | Distancevector | Compaq Servers | 0 | October 30th 03 11:06 PM |
Linear Mode
