A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

trouble with keyhook.exe



 
 
Thread Tools Display Modes
  #1  
Old March 7th 08, 04:09 AM posted to alt.comp.periphs.mainboard.asus
nesredep egrob
external usenet poster
 
Posts: 2
Default trouble with keyhook.exe

I have set up a P5S-MX SE mother board. Everything has gone well except I am
left with a message:
"The procedure entry point ?DDrawSupportGetDriverName@CSiSEsc@@AEHPAD@Z could
not be located in the dynamic link library SiSApCom.dll"

For that reason I have run the MB drivers and applications CD several times
thinking that something is wrong there - all to no avail-

Does anyone have an answer to that, Please

Borge in sunny Perth, Australia
  #2  
Old March 7th 08, 06:44 AM posted to alt.comp.periphs.mainboard.asus
Paul
external usenet poster
 
Posts: 13,364
Default trouble with keyhook.exe

nesredep egrob wrote:
I have set up a P5S-MX SE mother board. Everything has gone well except I am
left with a message:
"The procedure entry point ?DDrawSupportGetDriverName@CSiSEsc@@AEHPAD@Z could
not be located in the dynamic link library SiSApCom.dll"

For that reason I have run the MB drivers and applications CD several times
thinking that something is wrong there - all to no avail-

Does anyone have an answer to that, Please

Borge in sunny Perth, Australia


The code in question, is in the SIS video driver. I downloaded the
driver from the Asus web page. This is what I found.

2K_XP\utilDLL

03/06/2008 10:25p DIR .
03/06/2008 10:25p DIR ..
03/06/2008 10:06p DIR 9xBin
04/11/2007 03:05a 36,864 keyhook.exe
04/11/2007 03:06a 20,480 LCDMode.exe
03/06/2008 10:06p DIR ntBin
04/11/2007 03:04a 135,168 SiSApCom.dll
04/11/2007 03:06a 65,536 SiSHook.dll Hot keys for screen control ?
10/07/2005 03:13p 118,784 sislib.dll Some kind of AGP speed test ?
10/07/2005 03:13p 1,663 sislib.ini
04/11/2007 03:24a 30,928 sisvb.dll SIS video bridge controlling library
04/11/2007 03:06a 110,592 TVMode.dll

I found a match for DDrawSupportGetDriverName in the TVMode.dll file.
If it was my machine, I'd have a look around, to see where SiSApCom.dll
was installed, and see if TVMode.dll was next to it in the same directory.

I don't know exactly what the cure might be, but those files will have
something to do with it. It is possible one or more of those .exe files,
might be run as a service, or even be running all the time (as seen in
Task Manager when you press ctrl-alt-delete).

Paul


  #3  
Old March 8th 08, 02:10 AM posted to alt.comp.periphs.mainboard.asus
nesredep egrob
external usenet poster
 
Posts: 2
Default trouble with keyhook.exe

On Fri, 07 Mar 2008 00:44:29 -0500, Paul wrote:

nesredep egrob wrote:
I have set up a P5S-MX SE mother board. Everything has gone well except I am
left with a message:
"The procedure entry point ?DDrawSupportGetDriverName@CSiSEsc@@AEHPAD@Z could
not be located in the dynamic link library SiSApCom.dll"

For that reason I have run the MB drivers and applications CD several times
thinking that something is wrong there - all to no avail-

Does anyone have an answer to that, Please

Borge in sunny Perth, Australia


The code in question, is in the SIS video driver. I downloaded the
driver from the Asus web page. This is what I found.

2K_XP\utilDLL

03/06/2008 10:25p DIR .
03/06/2008 10:25p DIR ..
03/06/2008 10:06p DIR 9xBin
04/11/2007 03:05a 36,864 keyhook.exe
04/11/2007 03:06a 20,480 LCDMode.exe
03/06/2008 10:06p DIR ntBin
04/11/2007 03:04a 135,168 SiSApCom.dll
04/11/2007 03:06a 65,536 SiSHook.dll Hot keys for screen control ?
10/07/2005 03:13p 118,784 sislib.dll Some kind of AGP speed test ?
10/07/2005 03:13p 1,663 sislib.ini
04/11/2007 03:24a 30,928 sisvb.dll SIS video bridge controlling library
04/11/2007 03:06a 110,592 TVMode.dll

I found a match for DDrawSupportGetDriverName in the TVMode.dll file.
If it was my machine, I'd have a look around, to see where SiSApCom.dll
was installed, and see if TVMode.dll was next to it in the same directory.

I don't know exactly what the cure might be, but those files will have
something to do with it. It is possible one or more of those .exe files,
might be run as a service, or even be running all the time (as seen in
Task Manager when you press ctrl-alt-delete).

Paul

Thanks - I admire your technical knowledge, very good indeed. I have both files
in the systems32 folder. I seem to remember that there was a mention that if
something did not work to just install the drivers again - well I did that 3
times and it still does not work -

I suppose rather than creating a lot of work, I might see if I can get Asus to
send me a CD that works or else put up with something where I really cannot see
what is missing.

Thanks

Borge in sunny Perth, Australia
  #4  
Old March 8th 08, 02:25 AM posted to alt.comp.periphs.mainboard.asus
Paul
external usenet poster
 
Posts: 13,364
Default trouble with keyhook.exe

nesredep egrob wrote:
On Fri, 07 Mar 2008 00:44:29 -0500, Paul wrote:

nesredep egrob wrote:
I have set up a P5S-MX SE mother board. Everything has gone well except I am
left with a message:
"The procedure entry point ?DDrawSupportGetDriverName@CSiSEsc@@AEHPAD@Z could
not be located in the dynamic link library SiSApCom.dll"

For that reason I have run the MB drivers and applications CD several times
thinking that something is wrong there - all to no avail-

Does anyone have an answer to that, Please

Borge in sunny Perth, Australia

The code in question, is in the SIS video driver. I downloaded the
driver from the Asus web page. This is what I found.

2K_XP\utilDLL

03/06/2008 10:25p DIR .
03/06/2008 10:25p DIR ..
03/06/2008 10:06p DIR 9xBin
04/11/2007 03:05a 36,864 keyhook.exe
04/11/2007 03:06a 20,480 LCDMode.exe
03/06/2008 10:06p DIR ntBin
04/11/2007 03:04a 135,168 SiSApCom.dll
04/11/2007 03:06a 65,536 SiSHook.dll Hot keys for screen control ?
10/07/2005 03:13p 118,784 sislib.dll Some kind of AGP speed test ?
10/07/2005 03:13p 1,663 sislib.ini
04/11/2007 03:24a 30,928 sisvb.dll SIS video bridge controlling library
04/11/2007 03:06a 110,592 TVMode.dll

I found a match for DDrawSupportGetDriverName in the TVMode.dll file.
If it was my machine, I'd have a look around, to see where SiSApCom.dll
was installed, and see if TVMode.dll was next to it in the same directory.

I don't know exactly what the cure might be, but those files will have
something to do with it. It is possible one or more of those .exe files,
might be run as a service, or even be running all the time (as seen in
Task Manager when you press ctrl-alt-delete).

Paul

Thanks - I admire your technical knowledge, very good indeed. I have both files
in the systems32 folder. I seem to remember that there was a mention that if
something did not work to just install the drivers again - well I did that 3
times and it still does not work -

I suppose rather than creating a lot of work, I might see if I can get Asus to
send me a CD that works or else put up with something where I really cannot see
what is missing.

Thanks

Borge in sunny Perth, Australia


You could try getting the driver direct from SIS. That would be
another way of doing it. The SIS one might be more recent than an
Asus download.

On looking over the package again, it could be that the
directory in question, is used for the display control
panel. So maybe disabling it or modifying it, wouldn't be
a wise idea.

Paul

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trouble with wireless connection. Would appreciate suggestions on where to trouble shoot or where to look for problems. Ronald Homebuilt PC's 2 September 24th 07 11:54 AM
AMD in trouble chrisv General 3 May 17th 07 04:11 AM
CD-RW Trouble RH710 General 7 September 21st 04 04:45 AM
trouble with old 486 Francois General 13 April 21st 04 12:37 AM
ATI is in trouble J.Clarke Nvidia Videocards 38 December 11th 03 02:56 AM


All times are GMT +1. The time now is 02:32 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.