If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
M4A88TD-V EVO/USB3 RTC Boot Problem
My MB refuses to boot from the Samsung HDD attached to any SATA port until the RTC is reset then it boots OK and works normally until the next time it is shut down. During BIOS set-up the HDD is correctly detected, and all I do is reset the time/date this is the second MB with the same problem. what have I got wrong. The HDD booted the previous MB (ABit AN8 Ultra) OK. I've set the SATA port as IDE and AHCI to no affect. Nothing connected to the PC except mouse keyboard and monitor. Any suggestion please before I bin the board.: |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
M4A88TD-V EVO/USB3 -- O.C. Tuner problem | Percival P. Cassidy[_2_] | Asus Motherboards | 2 | June 12th 10 11:10 PM |
Memory for M4A88TD-V EVO/USB3 | Percival P. Cassidy[_2_] | Asus Motherboards | 2 | June 9th 10 08:19 PM |
M4A88TD-V EVO/USB3 -- AHCI problem, and 32-bit Win7 SATA driverswon't update | Percival P. Cassidy[_2_] | Asus Motherboards | 2 | June 6th 10 11:59 PM |
Help! Harddisk imagecopy 1:1 Evo N1020v --> boot problem | Dieter | Compaq Computers | 1 | November 18th 03 02:16 PM |
GA-7VAXP-A RTC slowdown problem | Gary Sinnott | Gigabyte Motherboards | 0 | September 19th 03 04:27 PM |