A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

GA-M78SM-S2H memory compatibility



 
 
Thread Tools Display Modes
  #1  
Old June 20th 08, 04:32 AM posted to alt.comp.periphs.mainboard.gigabyte
Dave[_31_]
external usenet poster
 
Posts: 16
Default GA-M78SM-S2H memory compatibility

I am looking to order this MB from NewEgg. I want to put 4GB of RAM in
it (2x2GB).

I looked through the memory compatibility chart on the Gigabyte web
site, but I'm not familiar with the manufacturers of 2GB memory chips
listed on the site.

Is anyone running Dual Channel with 2x2GB memory from Crucial, Kingston,
or Corsair?

Thanks!
  #2  
Old June 20th 08, 01:28 PM posted to alt.comp.periphs.mainboard.gigabyte
J
external usenet poster
 
Posts: 10
Default GA-M78SM-S2H memory compatibility

On Thu, 19 Jun 2008 22:32:16 -0500, Dave wrote:

I am looking to order this MB from NewEgg. I want to put 4GB of RAM in
it (2x2GB).

I looked through the memory compatibility chart on the Gigabyte web
site, but I'm not familiar with the manufacturers of 2GB memory chips
listed on the site.

Is anyone running Dual Channel with 2x2GB memory from Crucial, Kingston,
or Corsair?


I use 2x1Gb kingston pc5300 in S2H. But i would look at nominal
voltage for the ram. The highest ram voltage in the bios of m78sm-s2h
is 2.1 volt. So I would buy some pc6400 DDR2 ram with 1.8 volt nominal
voltage. Corsair often set 2.3 volt as nominal.

I have some 2 Gb cheap mushkins that I could try with. I have problems
running 4 of these in some s775 P35 motherboards. But I don't know
what S2H will say to 2 of these. A cumbersome test I think.

best regards

John
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Memory Compatibility Richard Wardle General 2 March 24th 08 03:00 AM
DDR II Memory compatibility mrique Homebuilt PC's 3 December 6th 07 11:54 PM
Memory compatibility joanne fee Homebuilt PC's 6 January 31st 07 08:14 AM
Memory compatibility Mark S Compaq Servers 1 February 22nd 04 02:12 AM
MEMORY COMPATIBILITY brian Homebuilt PC's 3 January 23rd 04 12:53 AM


All times are GMT +1. The time now is 04:09 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.