If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
SB Live platinum and AC3 DD via SPDIF
Platform XP, SBLive (pre 5.1)
On a clean install of XP I can get Dolby Digital via SPdif to output to DTT2500 speakers no prob (using the generic XP drivers) however when I install the apps and new drivers (Livedrivepac from creative website )I can no longer get the DD via SPdif to work, only analogue out works (using Power DVD). I have installed newest drivers and the XP patch to no avail. I want to use the appz that come with the drivers. How come I lose DD everytime??? Answers and suggestions anyone? |
#2
|
|||
|
|||
Just a thought here. Did you check the digital output checkbox in
audioHQ ? (either way, PowerDVD should be set to SPDIF-OUT mode) do you even see that checkbox ? (trying to see if the drivers are even offering you that feature or if you have the 'value' edition drivers installed) what version of PowerDVD are you using? "Careco" wrote in message ... Platform XP, SBLive (pre 5.1) On a clean install of XP I can get Dolby Digital via SPdif to output to DTT2500 speakers no prob (using the generic XP drivers) however when I install the apps and new drivers (Livedrivepac from creative website )I can no longer get the DD via SPdif to work, only analogue out works (using Power DVD). I have installed newest drivers and the XP patch to no avail. I want to use the appz that come with the drivers. How come I lose DD everytime??? Answers and suggestions anyone? |
#3
|
|||
|
|||
Everything was working fine with the generic XP drivers SPDIF output was
lost when the Creative drivers were used "Bendit" wrote in message om... Just a thought here. Did you check the digital output checkbox in audioHQ ? Yes (either way, PowerDVD should be set to SPDIF-OUT mode) do you even see that checkbox ? (trying to see if the drivers are even offering you that feature or if you have the 'value' edition drivers installed) what version of PowerDVD are you using? 4 Enable SPDIF = deadly silence switch to 2 speaker mode = sound Solution? Creative, where are the drivers that work? |
#4
|
|||
|
|||
Which version of these drivers?
"Michael" wrote in message om... "Careco" wrote in message ... Everything was working fine with the generic XP drivers SPDIF output was lost when the Creative drivers were used "Bendit" wrote in message om... Just a thought here. Did you check the digital output checkbox in audioHQ ? Yes (either way, PowerDVD should be set to SPDIF-OUT mode) do you even see that checkbox ? (trying to see if the drivers are even offering you that feature or if you have the 'value' edition drivers installed) what version of PowerDVD are you using? 4 Enable SPDIF = deadly silence switch to 2 speaker mode = sound Solution? Creative, where are the drivers that work? Creative claims there is no problem. There was a thread on this awhile ago, as I had the same issues. Spent hours with creative after installing new drivers. Extremely rude and unhelpful, ie, "YOU must have changed something and not told me"(from the, ahem, so called tech.) Solution: use the old drivers, which I got from File Planet. |
#5
|
|||
|
|||
Thanks,
Downloaded drivers from Fileplanet, now got AC3 back through SPDIF Creative support??? why bother. Brism "Neil Deadman" wrote in message ... Which version of these drivers? "Michael" wrote in message om... "Careco" wrote in message ... Everything was working fine with the generic XP drivers SPDIF output was lost when the Creative drivers were used "Bendit" wrote in message om... Just a thought here. Did you check the digital output checkbox in audioHQ ? Yes (either way, PowerDVD should be set to SPDIF-OUT mode) do you even see that checkbox ? (trying to see if the drivers are even offering you that feature or if you have the 'value' edition drivers installed) what version of PowerDVD are you using? 4 Enable SPDIF = deadly silence switch to 2 speaker mode = sound Solution? Creative, where are the drivers that work? Creative claims there is no problem. There was a thread on this awhile ago, as I had the same issues. Spent hours with creative after installing new drivers. Extremely rude and unhelpful, ie, "YOU must have changed something and not told me"(from the, ahem, so called tech.) Solution: use the old drivers, which I got from File Planet. |
#6
|
|||
|
|||
I have the exact same problem. I have a dual boot system with XP and 2000.
With back to back boot-ups, SPDIF out works in 2000 but not in XP with the latest drivers from the creative site. I'm downloading the drivers from fileplanet now, hopefully they will fix this garbage. "Careco" wrote in message ... Platform XP, SBLive (pre 5.1) On a clean install of XP I can get Dolby Digital via SPdif to output to DTT2500 speakers no prob (using the generic XP drivers) however when I install the apps and new drivers (Livedrivepac from creative website )I can no longer get the DD via SPdif to work, only analogue out works (using Power DVD). I have installed newest drivers and the XP patch to no avail. I want to use the appz that come with the drivers. How come I lose DD everytime??? Answers and suggestions anyone? |
#7
|
|||
|
|||
After installing the drivers off of fileplanet, SPDIF actually works for me
in XP. I haven't experienced a reset while attempting to use PowerDVD. Make sure that you have digital output only and spdif bypass on. Other than that, all I can think of is to try re-installing some software.... "Neil Deadman" wrote in message ... I downloaded (what I hope was the correct drivers from fileplanet) and installed them. When I switched PowerDVD to SPDIF Out when ever I play a DVD or similar source it resets my PC. Any ideas?? Its fine with 2-ch out. Neil "chaferd" wrote in message news:vCpSa.4354$ff.2417@fed1read01... I have the exact same problem. I have a dual boot system with XP and 2000. With back to back boot-ups, SPDIF out works in 2000 but not in XP with the latest drivers from the creative site. I'm downloading the drivers from fileplanet now, hopefully they will fix this garbage. "Careco" wrote in message ... Platform XP, SBLive (pre 5.1) On a clean install of XP I can get Dolby Digital via SPdif to output to DTT2500 speakers no prob (using the generic XP drivers) however when I install the apps and new drivers (Livedrivepac from creative website )I can no longer get the DD via SPdif to work, only analogue out works (using Power DVD). I have installed newest drivers and the XP patch to no avail. I want to use the appz that come with the drivers. How come I lose DD everytime??? Answers and suggestions anyone? |
#8
|
|||
|
|||
I was also having major problems with reboots, and n checking creatives site
I found an obscure reference to a rather obvious problem. Since the newer mainboards do not have ISA slots, the BIOS is defaulted to having the IRQ's set for PCI PNP control. But since the Sound Blaster cards use IRQ 5 for legacy support, you have to change the BIOS IRQ 5 control to legacy. |
#9
|
|||
|
|||
Hi,
I just realised that my DD5:1/AC3 output has stopped working under WinXP as well since using the 5MB (ish) patch from creative. Has anyone resolved this issue yet, maybe its related to the DVD software, I use InterVideo WinDVD Platinum. I will have to re-read the threads to find out more about a fix. .. Wayne ][ |
Thread Tools | |
Display Modes | |
|
|