If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cannot format new 200gb Hard disk
sounds like you need to check if your mobo support that size drive and if
you have the newest bios Don't crosspost to 6 newsgroups! Wayne "Milleniumaire" wrote in message om... I have just installed a new Seagate Barracuda 7200.7 200gb (ST3200822A) drive to replace an old 9gb drive. Windows XP Disk Manager recognises the drive and reports it as 186.31GB Unallocated. I can create a Primary Partition on this drive to use up all 186.31GB, however if I also choose to format it then at the very end of the format process I get the error "Logical Disk Manager: The format did not complete successfully". The drive appears in Windows Explorer and when I try to access it I am told that it is not formatted and prompts me to format it - which also fails. I have also tried using Partition Magic 8.0 but this fails with Error #514 Unknown error formatting volume during the final stage of Updating System Information. When searching the Net, the number 137GB kept appearing as a "large disk" boundary which may cause problems, so I tried creating a partition of 130GB and it worked, however this leaves me with 70GB of wasted space! I am unable to create more partitions to use up the extra space as the formatting fails. I am running Windows XP SP2 (I also tried it with SP1 before upgrading to SP2). The fact that windows CAN see the full size of the disk and create partitions, but cannot format them seems curious. I have run some Seagate diagnostic tools to check the disk and no errors have been reported. My machine spec. is: Gigabyte GA-8IHXP Socket 478 ATX Rev 2.1 Intel Pentium 4 2.53ghz Northwood 512 768mb PC1066 Rambus Memory Winfast A250 Utra TD Graphics 2 x DiamondMax+ D740X 40gb UDMA133 in stripped RAID array Maxtor 90840D6 9gb Seagate Barracuda 7200.7 LG GDR-8163BB DVD Rom LG GSA-4040B Super Multi DVD Drive Windows XP Professional + SP 2 This appears to be a Windows XP problem, but is it possibly a Motherboard restriction? (I would have thought not because windows can see the whole drive, but just can't format it). I have spent a whole weekend trying to resolve this problem so any pointers would be useful. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hard disk failure and security lock | [email protected] | General | 2 | December 16th 04 11:02 AM |
REPOST: A7V333: no longer able to access hard disks at boot time | Chris Metzler | Asus Motherboards | 6 | January 8th 04 06:29 PM |
Hard disk does not show in BIOS. Extract data from HDD? | Kanolsen | General | 1 | November 14th 03 10:03 PM |
IBM/Hitachi Hard Disk | Macca | Homebuilt PC's | 2 | October 8th 03 12:21 AM |
HELP, SATA Hard Disk | YKK | General | 12 | September 14th 03 09:46 PM |