If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
My latest PC Problem
I have a Hewlett Packard Pavilion 7955 PC with 512mb and Windows XP.
I started having issues whenever I opened up a text file or folder on my desktop. The files would open but they would be accompanied by a message that siad the file was corrupt. And on occasion I would not be able to open anything. Even the start menu would only appear for a split fraction of a second when I clicked on it. Or only a properties window would appear whenever I attempted to open up anything on my desktop. All this necessitating a re-boot of my PC. Well, I can't even do that now. I only get the following message on Boot-up: ---------- ---------- ---------- ---------- ---------- "windows could not start because the following file is missing or corrupt: Windows root\system332\ntoskrnl.exe. Please re-nstall a copy of the above file." ---------- ---------- ---------- ---------- ---------- But that is only when I attempt to boot from this drive... When I attempt to boot using any of my other known working drives or my DVD player(with Windows XP disk), regardless of the boot order set, drive positions on the cable, jumper settings, primary or secondary IDE connection used, as well as new cables, I get the following message: ---------- ---------- ---------- ---------- ---------- "PXE-E61: Media test failure, check cable. PXE-MOF: Exiting Intel PXE ROM" ---------- ---------- ---------- ---------- ---------- So basically, I cannot boot or repair Windows XP on this PC. Could the problem by a BIOS problem or my CMOS battery? Is this system ready for the trash? (I several other systems, but each have their road blocks when I attempt to install a fresh drive with Windows XP). :-( Any advice would be appreciated. Thanks a lot. Darren Harris Staten Isalnd, New York. |
#2
|
|||
|
|||
My latest PC Problem
Searcher7 wrote:
I have a Hewlett Packard Pavilion 7955 PC with 512mb and Windows XP. I started having issues whenever I opened up a text file or folder on my desktop. The files would open but they would be accompanied by a message that siad the file was corrupt. And on occasion I would not be able to open anything. Even the start menu would only appear for a split fraction of a second when I clicked on it. Or only a properties window would appear whenever I attempted to open up anything on my desktop. All this necessitating a re-boot of my PC. Well, I can't even do that now. I only get the following message on Boot-up: ---------- ---------- ---------- ---------- ---------- "windows could not start because the following file is missing or corrupt: Windows root\system332\ntoskrnl.exe. Please re-nstall a copy of the above file." ---------- ---------- ---------- ---------- ---------- But that is only when I attempt to boot from this drive... When I attempt to boot using any of my other known working drives or my DVD player(with Windows XP disk), regardless of the boot order set, drive positions on the cable, jumper settings, primary or secondary IDE connection used, as well as new cables, I get the following message: ---------- ---------- ---------- ---------- ---------- "PXE-E61: Media test failure, check cable. PXE-MOF: Exiting Intel PXE ROM" ---------- ---------- ---------- ---------- ---------- So basically, I cannot boot or repair Windows XP on this PC. Could the problem by a BIOS problem or my CMOS battery? Is this system ready for the trash? (I several other systems, but each have their road blocks when I attempt to install a fresh drive with Windows XP). :-( Any advice would be appreciated. If I recall correctly that PXE business is a network book failure. That's not really surprising as you probably don't have that facility setup, nor would you need to. It's probably just getting to that after all else has failed. Ok, so the symptoms you describe up to this point could easily have been caused by a failing hard drive or a flaky power supply, or even the motherboard. Either one of those things could have had an escalation in their failure that has produced the new symptoms. It sounds like you've been pretty thorough in testing drive combinations. Given that any and all drives seem to fail, it sound like its something more than just a single bad hard drive. I would suggest this: 1) Get yourself a known working optical drive and a known working power supply. 2) Reduce your system a minimum configuration. Just the motherboard, cpu, one stick of memory (if that configuration is legit), the known good optical drive, jumpered as a master, the power supply, a video card if your system does not have onboard video. 3) Dust bust the system and make sure all contact points are clean and undamaged--that means the memory modules and that video card if you need it. 4) You might consider pulling the whole mess out of the case and setting up the test system on a countertop. Make sure you observe static discharge precautions. If you can get the system to boot, then you can start adding bits back in until the problem emerges. If it will not boot in that minimum configuration, then you have to look to a problem with the memory or possibly the motherboard. |
#3
|
|||
|
|||
My latest PC Problem
Searcher7 wrote:
I have a Hewlett Packard Pavilion 7955 PC with 512mb and Windows XP. I started having issues whenever I opened up a text file or folder on my desktop. The files would open but they would be accompanied by a message that siad the file was corrupt. And on occasion I would not be able to open anything. Even the start menu would only appear for a split fraction of a second when I clicked on it. Or only a properties window would appear whenever I attempted to open up anything on my desktop. All this necessitating a re-boot of my PC. Well, I can't even do that now. I only get the following message on Boot-up: ---------- ---------- ---------- ---------- ---------- "windows could not start because the following file is missing or corrupt: Windows root\system332\ntoskrnl.exe. Please re-nstall a copy of the above file." ---------- ---------- ---------- ---------- ---------- But that is only when I attempt to boot from this drive... When I attempt to boot using any of my other known working drives or my DVD player(with Windows XP disk), regardless of the boot order set, drive positions on the cable, jumper settings, primary or secondary IDE connection used, as well as new cables, I get the following message: ---------- ---------- ---------- ---------- ---------- "PXE-E61: Media test failure, check cable. PXE-MOF: Exiting Intel PXE ROM" ---------- ---------- ---------- ---------- ---------- So basically, I cannot boot or repair Windows XP on this PC. Could the problem by a BIOS problem or my CMOS battery? Is this system ready for the trash? (I several other systems, but each have their road blocks when I attempt to install a fresh drive with Windows XP). :-( Any advice would be appreciated. Thanks a lot. Darren Harris Staten Isalnd, New York. The "file is corrupt" is not something a text editor can easily determine. If the data looked like binary, the text editor may comment on the non-text nature of the file. So the "file is corrupt" tells me the utility saw CRC errors coming from the storage subsystem (serious problems). Falling back to PXE (net boot), means that no hard drives were located, that contained a boot system. ******* I'd start with memtest86+ from memtest.org . You do *not* want to be writing to hard drives, if bad memory is present in the computer. You need to rebuild your confidence in the system, by testing it. Steps 1-4 here, are not attempting to repair anything, but instead indicate whether it is safe to attempt to mess around. 1) Memtest86+ from memtest.org . Run at least two passes. If there are memory errors, fix it. Either tweak the memory voltage and timing, or buy a new module of memory. If errors are always at the same locations each time, buy a new module. 2) Linux boot CD. Knoppix 6.0.1 for example http://www.knopper.net/knoppix-mirrors/index-en.html KNOPPIX_V6.0.1CD-2009-02-08-EN.iso 660558 KB (ISO9660, burn a CD with Nero) KNOPPIX_V6.0.1CD-2009-02-08-EN.iso.md5 1 KB (checksum) That CD, when it boots, looks like this. http://www.lidux.de/images/desktops/knoppix-60-250.jpg Tools are along the lower left of the screen. For example, you can open a terminal window or a browser. 3) Using Linux, you can run Prime95 as a CPU and memory stress test. Booting the Linux CD would also be stressful, and if you see a lot of errors during boot, then you'd know that more than Windows sees a problem with your hardware. Prime95 can be found here. http://www.mersenne.org/freesoft/ http://mersenneforum.org/gimps/mprime259.tar.gz ( gzip -c -d mprime259.tar.gz | tar xf - Then execute the 4MB "mprime" executable file. ) 4) Knoppix, by default, opens Windows partitions read-only. If you needed to copy or move files around, you have to do "Properties" on the disk in question, and change the mount option to read/write. Knoppix supports FAT32 and NTFS, so that isn't a problem. I don't see anything obvious to attempt at this point, since I don't understand what is really wrong. 5) You can download and run the disk manufacturer diagnostic, to see if there are a lot of sectors damaged or whatever. The disk manufacturer diagnostic is self booting as well. I have a Seagate Seatools for DOS diskette on my desk here, for that brand of disks. 6) If everything in the system looks healthy to this point, *then* I might consider running CHKDSK from the Windows recovery console. The recovery console comes from your Windows install CD, when you boot with it and select the correct option. http://technet.microsoft.com/en-us/l.../bb491051.aspx CHKDSK will try and repair the file system. 7) Try booting Windows again. If it still fails... 8) Do a repair install from your Windows CD. That leaves user installed programs and data alone. It will require reinstalling Service Packs (the ones after the version of the Windows CD), any IE upgrades, WMP upgrades and so on. And you'd need to visit Windows Update and reinstall a ton of security patches. So while it doesn't mean having to reinstall all your programs, it can still be a lot of work. Since you have an HP, option 6 and 8 may not be available to you. It is possible you could get to the recovery console, using a set of floppies downloaded from Microsoft. But I doubt a repair install is possible with the typical media provided with pre-built systems. They don't have a real installer CD to work with. It's your system, so you know the details of this better than I do. HTH, Paul |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem installing latest drivers | Louis[_2_] | General | 8 | June 22nd 07 02:09 AM |
X800XT - TV problem with latest drivers | Treachery | Ati Videocards | 1 | April 30th 06 04:24 PM |
problem with the latest driver for radeon 9600xt | lillen69 | Ati Videocards | 1 | August 23rd 04 07:39 AM |
MSI FX5600 - Latest Driver Problem | John Hellingsworth | Nvidia Videocards | 4 | September 23rd 03 02:12 PM |
problem with latest drivers - AIW Radeon 7500 | Jman | Ati Videocards | 3 | August 29th 03 06:52 PM |