If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
No Display - Part 2
Well, I went ahead and replaced the motherboard with another M2N-SLI. I
got the system back together. It is now giving me a POST, but it is giving me an error, and I still have no display. It is one long beep followed by two short beeps. From what I understand, this indicates a video problem. I already know the video card is good, as I tested it in another system. I already tried reseating it and moving it to another slot. I am more suspicious of the RAM because even when I remove all the RAM, I still get the same error code. I cannot test the RAM as I don't have access to another system that supports DDR2 RAM. I've heard and learned that AMD-based Asus boards are very picky on RAM and the voltage they are rated for, especially the M2N-SLI. I've also heard lots of conflicts with G-Skill RAM and Asus boards. The G-Skills I am using are rated at 1.8V-2.0V. The motherboard supports a max of 1.95V. Do you think I should send the memory back for a different brand or do you think it is something else that's wrong? Thanks. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
No Display - Part 2 | Travis King | Asus Motherboards | 21 | March 16th 08 02:38 PM |
Display problems with Apple Cinema display | The Dave 3000 | Ati Videocards | 2 | August 29th 06 05:43 PM |
Inspiron 1150 display dim/dark Backlight? Display? Inverter? | Danny | Dell Computers | 3 | August 7th 06 04:32 AM |
IS THIS PART AVAILABLE | Marty | Printers | 0 | August 30th 05 05:55 PM |
Problem: Blank display after fiddling with primary/secondary display settings | Rasmus Paetau | Ati Videocards | 2 | June 17th 04 01:03 AM |