If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
again about 7n400 pro2 and sata
hi all
i'm sorry for "bad" english but i'm italian ) i some problem during install a sata HD on 7n400 pro2 in base mode first of all i've configured bios with this settings: Adv. bios features --sata\raid\scsi boot order: "sata" Adv. bios feat. --first boot device: "scsi" Adv. bios feat. --second boot dev.: "floppy" Adv. bios feat. --third boot dev.: "cdrom" Integr. perif. -- onboard h\w serial ata: "enable" Integr. perif. -- serial ata function: "base" then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not si3112r) driver and then, when installation was complete, rebooted. after reboot, the system seems not found the sata hd !! ;__; i try to install the driver on the previous OS on uATA HD, and all seems ok: i can see the winxp installation file on sata hd, but it can't boot by itself help please and happy Easter p.s.: i tried with both new and old driver and bios version.... |
#2
|
|||
|
|||
"Fa" wrote in message ... hi all i'm sorry for "bad" english but i'm italian ) i some problem during install a sata HD on 7n400 pro2 in base mode first of all i've configured bios with this settings: Adv. bios features --sata\raid\scsi boot order: "sata" Adv. bios feat. --first boot device: "scsi" Adv. bios feat. --second boot dev.: "floppy" Adv. bios feat. --third boot dev.: "cdrom" Integr. perif. -- onboard h\w serial ata: "enable" Integr. perif. -- serial ata function: "base" then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not si3112r) driver and then, when installation was complete, rebooted. after reboot, the system seems not found the sata hd !! ;__; i try to install the driver on the previous OS on uATA HD, and all seems ok: i can see the winxp installation file on sata hd, but it can't boot by itself help please and happy Easter p.s.: i tried with both new and old driver and bios version.... Do you have any other PCI IDE controller cards fitted to the motherboard? |
#3
|
|||
|
|||
Fred at home wrote:
"Fa" wrote in message ... hi all i'm sorry for "bad" english but i'm italian ) i some problem during install a sata HD on 7n400 pro2 in base mode first of all i've configured bios with this settings: Adv. bios features --sata\raid\scsi boot order: "sata" Adv. bios feat. --first boot device: "scsi" Adv. bios feat. --second boot dev.: "floppy" Adv. bios feat. --third boot dev.: "cdrom" Integr. perif. -- onboard h\w serial ata: "enable" Integr. perif. -- serial ata function: "base" then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not si3112r) driver and then, when installation was complete, rebooted. after reboot, the system seems not found the sata hd !! ;__; i try to install the driver on the previous OS on uATA HD, and all seems ok: i can see the winxp installation file on sata hd, but it can't boot by itself help please and happy Easter p.s.: i tried with both new and old driver and bios version.... Do you have any other PCI IDE controller cards fitted to the motherboard? no, my complete hardware is: -amd 2400+ (running @2340mhz 203*11.5x 10% overvolt with coolermaster x-dream at 40°C) -7n400 pro2 -2x512 MB ram corsair XMS pc3200 (2-3-3-6) -ATI AIW 9700 pro -1 addictional LAN card -1 HD maxtor 80GB serial ATA -2 HD maxtor 60GB ultra ATA |
#4
|
|||
|
|||
"Fa" wrote in message ... Fred at home wrote: "Fa" wrote in message ... hi all i'm sorry for "bad" english but i'm italian ) i some problem during install a sata HD on 7n400 pro2 in base mode first of all i've configured bios with this settings: Adv. bios features --sata\raid\scsi boot order: "sata" Adv. bios feat. --first boot device: "scsi" Adv. bios feat. --second boot dev.: "floppy" Adv. bios feat. --third boot dev.: "cdrom" Integr. perif. -- onboard h\w serial ata: "enable" Integr. perif. -- serial ata function: "base" then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not si3112r) driver and then, when installation was complete, rebooted. after reboot, the system seems not found the sata hd !! ;__; i try to install the driver on the previous OS on uATA HD, and all seems ok: i can see the winxp installation file on sata hd, but it can't boot by itself help please and happy Easter p.s.: i tried with both new and old driver and bios version.... Do you have any other PCI IDE controller cards fitted to the motherboard? no, my complete hardware is: -amd 2400+ (running @2340mhz 203*11.5x 10% overvolt with coolermaster x-dream at 40°C) -7n400 pro2 -2x512 MB ram corsair XMS pc3200 (2-3-3-6) -ATI AIW 9700 pro -1 addictional LAN card -1 HD maxtor 80GB serial ATA -2 HD maxtor 60GB ultra ATA Did you ever fix it? |
#5
|
|||
|
|||
"Fa" wrote in message ...
hi all i'm sorry for "bad" english but i'm italian ) i some problem during install a sata HD on 7n400 pro2 in base mode first of all i've configured bios with this settings: Adv. bios features --sata\raid\scsi boot order: "sata" Adv. bios feat. --first boot device: "scsi" Adv. bios feat. --second boot dev.: "floppy" Adv. bios feat. --third boot dev.: "cdrom" Integr. perif. -- onboard h\w serial ata: "enable" Integr. perif. -- serial ata function: "base" then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not si3112r) driver and then, when installation was complete, rebooted. after reboot, the system seems not found the sata hd !! ;__; i try to install the driver on the previous OS on uATA HD, and all seems ok: i can see the winxp installation file on sata hd, but it can't boot by itself help please and happy Easter p.s.: i tried with both new and old driver and bios version.... I had a somewhat similar problem... Try first boot device floppy, second boot device cdrom, third boot device scsi. if that doesnt work, put sata function to raid and reinstall again, using the sata raid drivers. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GA-7N400 Pro2 not finding SATA disk due to front fan problems! | Kalle | Gigabyte Motherboards | 0 | February 24th 04 02:47 PM |
Ga 7n400 pro2 and sata Help! | rotor | Gigabyte Motherboards | 4 | February 16th 04 01:21 AM |
New PC - GA-7N400 Pro2 and more problems with Win XP and SATA | Hm | Gigabyte Motherboards | 3 | January 17th 04 09:48 PM |
8IPE1000 Pro2 SATA Capacity Problems | Matty O | Gigabyte Motherboards | 5 | December 29th 03 08:44 PM |
SATA and Win98SE on GA-8IPE1000 Pro2? | Andrew Dickson | Gigabyte Motherboards | 1 | November 20th 03 09:27 AM |