If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Will an AGP 4x slot handle an APG 2x card?
I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I
use an AGP 2x card in the slot, or does the card have to be 4x? Thanks in advance. -Wiley |
#2
|
|||
|
|||
Wiley Q. Hacker wrote:
I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? You can put AGP 2 in it, it will just run at AGP 2 speed. |
#3
|
|||
|
|||
On Thu, 25 Sep 2003 18:57:04 +0000 (UTC), AD C
wrote: Wiley Q. Hacker wrote: I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? You can put AGP 2 in it, it will just run at AGP 2 speed. yes. just check the motherboard's specs at its website. if its 4x agp, it usually means it can handle 4x and 2x agp. however a 4x agp motherboard cannot handle an 8x agp video card. It literally won't fit in. |
#4
|
|||
|
|||
"Wiley Q. Hacker" wrote:
I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? Thanks in advance. -Wiley .. ECS web site: http://www.ecs.com.tw/index.asp The K7S5A Pro [V5.0] manual, available at the ECS web site, says only 1.5V AGP cards are supported. This would mean that old AGP 1.0, AGP1X/2X cards are not supported. AGP 1.0, AGP1X/2X cards were 3.3V. |
#5
|
|||
|
|||
zalzon wrote:
On Thu, 25 Sep 2003 18:57:04 +0000 (UTC), AD C wrote: Wiley Q. Hacker wrote: I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? You can put AGP 2 in it, it will just run at AGP 2 speed. yes. just check the motherboard's specs at its website. if its 4x agp, it usually means it can handle 4x and 2x agp. however a 4x agp motherboard cannot handle an 8x agp video card. It literally won't fit in. |
#6
|
|||
|
|||
zalzon wrote:
yes. just check the motherboard's specs at its website. if its 4x agp, it usually means it can handle 4x and 2x agp. however a 4x agp motherboard cannot handle an 8x agp video card. It literally won't fit in. Yes it will, my nephew got a 4x motherboard and a 8 times card. A two times card wil not fit in a 8 times slot |
#7
|
|||
|
|||
sorry my mistake.
yes a 4x motherboard will fit an 8x card. just be sure the card is 4x & 8x. the later model cards are only 8x and my guess is they won't work (as opposed to fit in) on a 4x motherboard.... then again i may be wrong (yet again) On Fri, 26 Sep 2003 07:29:25 +0000 (UTC), AD C wrote: zalzon wrote: yes. just check the motherboard's specs at its website. if its 4x agp, it usually means it can handle 4x and 2x agp. however a 4x agp motherboard cannot handle an 8x agp video card. It literally won't fit in. Yes it will, my nephew got a 4x motherboard and a 8 times card. A two times card wil not fit in a 8 times slot |
#8
|
|||
|
|||
Thanks. This means I should go and return my AGP 2x card. Appreciate the help.
----- Wiley "steven67@" wrote in message ... "Wiley Q. Hacker" wrote: I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? Thanks in advance. -Wiley . ECS web site: http://www.ecs.com.tw/index.asp The K7S5A Pro [V5.0] manual, available at the ECS web site, says only 1.5V AGP cards are supported. This would mean that old AGP 1.0, AGP1X/2X cards are not supported. AGP 1.0, AGP1X/2X cards were 3.3V. |
#9
|
|||
|
|||
Make sure it is the same voltage.
"Wiley Q. Hacker" wrote in message m... I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? Thanks in advance. -Wiley |
#10
|
|||
|
|||
It should be fine, just don't force it. If the notches in the socket
line up with the notches in your card, it'll work OK. Earl Dummy wrote: Make sure it is the same voltage. "Wiley Q. Hacker" wrote in message m... I have an ECS K7S5A Pro mobo with an AGP 4x slot built into it. Can I use an AGP 2x card in the slot, or does the card have to be 4x? Thanks in advance. -Wiley |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
On the brink of madness... | I.C. Koets | General | 18 | January 31st 05 10:49 PM |
New Video Card AGP | B&B Musmon | Overclocking AMD Processors | 1 | August 29th 04 02:25 PM |
Does a Firewire 800 PCI card make sense in a 32-bit PCI slot? | @drian | General | 3 | September 10th 03 11:58 PM |
Does a Firewire 800 PCI card make sense in a 32-bit PCI slot? | @drian | Homebuilt PC's | 0 | September 10th 03 09:12 AM |
PCMCIA card slot on a desktop ?? | L337JasE | General | 7 | August 28th 03 12:49 AM |